Question about Whirlpool Calypso GVW9959K Top Load Washer
How to fix Code 39 error with CD or DVD Drive
This is a Processor Rest Error
This error code is displayed if the control failed to save cycle information during a power failure. This does not generate an error code beep.
Press STOP/CANCEL to clear the display.
And if needed unplug for 5 minutes to reset the system
Please remember to leave a rating.
Posted on Oct 24, 2008
Tips for a great answer:
Jul 14, 2016 | Washing Machines
Mar 03, 2015 | Haier Washing Machines
Hey Beverley, thanks for your post!
I see that your Electrolux washer is displaying the error code "ERR". Typically a number follows the "ERR" but if no number followed the "ERR" error code then your washer has detected an error. I would perform a reset on your washer which can be done by unplugging the power cord or flipping the household circuit breaker for roughly ten minutes.
If that does not help correct the issue it could be a problem with your control panel or wiring harness. I would recommend seeking out assistance from a professional in order to properly diagnosis and repair your washer. I hope this is helpful to some degree. -Matt
Oct 04, 2014 | Washing Machines
Hello friend, thanks for your post!
Based off the information you provided your Electrolux washer is displaying "0.00". Typically any error code that is labeled "00" means no error code stored, which means it's a false error code. I would recommend performing a reset on your washer due erase any false error codes. You can do that by disconnecting the power from your appliance, by either unplugging it or flipping the household circuit breaker, for ten minutes.
If this step does not help resolve the problem please provide me with the new error code or if your display continues to show "0.00" I would suggest seeking assistance from a professional to come out and properly diagnosis your washer. I hope this information is helpful. -Matt
Oct 02, 2014 | Electrolux Washing Machines
Jun 19, 2014 | Zanussi Washing Machines
Hello tseitlenok - Typically ERR indicates that the washer has detected an error. Try reprogramming the unit by unplugging it or flipping the household circuit breaker off. Wait approximately ten minutes and restart unit. If error code does not clear, I would personally recommend consulting a certified technician for an accurate diagnosis and to assist with the repairs.
Mar 01, 2013 | Frigidaire Gallery GLWS1339EC Top Load...
Sep 22, 2011 | Kenmore HE2 Plus Front Load Washer
Feb 25, 2008 | Washing Machines
Jun 20, 2007 | Fisher and Paykel Fisher Paykel Intuitive...
104 people viewed this question
Usually answered in minutes!