Question about GE 24GP653 24" TV

1 Answer

WIll not work with Comcast, DirecTV, DishNetwork Remotes

I have the GE 24GP653 24" Television, stamped SEPTEMBER 2002.

I've tried every 4 digit code I could find from DirecTV to get it to work with my DirecTV remote, then I got Dish Network, and tried every code, and now I have Comcast and I cannot get my Comcast DVR 3-1 Remote to work with my television. Yea I should buy a new LCD and go bigger, but this one works fine except this problem I've had for 6 years... What are my options??? What code will work? What can I do to get this to work I just want my volume to go up and down and the TV to turn on/off when I hit the button :-( Darn GE! I hate U!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hello! I just got my Directv remote to work with my GE tv. I started by trying code 11922, and when that didn't work, I followed the Directv instructions to find a set-up code manually. After I followed the instructions below and doing it about 6-8 times, it started working! (So I guess the code 11928 - 11930 might work?) Good luck! I'm still having problems getting the "video" setting to work to switch inputs, but I'll keep trying...

  • Set the "Mode Switch" to the desired mode such as TV for a Television.
  • Press and hold the "Mute" button and the "Select" button until the visible LED blinks twice.
  • Enter the code "991" followed by the "device number"
    1. for Televisions
    2. for "AUX 1" devices - VCRs or DVDs
    3. for "AUX 2" devices - Audio
  • You can step through the setup codes for this mode by pressing the "Channel Up" key to go forward through the codes or pressing the "Channel Down" key to go back to the previous codes.
  • You can try out each code by pressing one or more function keys such as power, volume or digit keys.
  • When you've found the setup code that works for your device, press the "Select" key.

Posted on Oct 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dishnetwork remote control code for tv daewoo


Hello, Cheri Torres with DISH Network Customer Service here. We have a few different codes for each of our different models of remotes. The model number of your remote will be located on the back of the remote at the top, normally a two to three digit number with a decimal point. I will list here for you the best codes for each of our more popular models of remotes and the instructions for addressing the remote to the Daewoo TV. I hope this information helps and if you have any other questions please let me know!

Models of remotes Remotes codes
3.0, 3.1, 3.2, 3.4 IR remotes - codes 531, 719, 672, 664, 727, 524, 816.
5.0, 5.2, 5.3, 5.4 IR remotes - codes 719, 531, 524, 526, 727, 529.
4.0 and 4.4 IR/UHF remotes - codes 719, 727, 733, 531, 524, 816.
6.0, 6.2, 6.3, 6.4 IR/UHF remotes - codes 531, 719, 727, 573, 524.
20.0 IR and 21.0 IR/UHF remotes - codes 531, 528, 684, 524, 630,684.

Instructions for addressing the remote to the TV
1. Turn TV on.
2. Press and hold down the TV mode button until all other mode buttons light up red.
3. Enter the 3 digit code for your TV.
4. Press the pound(#) button once.
5. Test the functionality of the TV on the DISH remote.

Oct 24, 2011 | Daewoo DTQ-19V1FC 19" TV

1 Answer

I need the tv code for a universal remote, im reaaaaalllly sick of getting up and changing the channel myself


we would have to know the model number of the tv and the universal remote to give you a number ... the older universal remotes have a 3 digit code .. i have found many things that dont work with these ... the newer ones have a 4 digit code and work (or partiallly work) with a lot more products.. the code list comes with the remote or sometimes you can get them over the internet .. .. i do have the list for older and newer GE remotes .. there are many codes for various models of GE televisions .. so you need a model number .. at least how old it is .. and what remote you are using .. i will look .. maybe there are few enough codes that i can publish them all .. you would have to try them one at a time ...

Aug 05, 2009 | GE Standard (CRT) Televisions

1 Answer

Ican`t program my samsung tv to my directv remote, to control the the tv`s volume,on off button, and the volume. samsung, tx T2082 slim fit dolby digital


All remotes available are in the hands of DirecTV and Samsung. I believe DirecTV has a way of getting their remote to try every code that's stored inside their remote. If that doesn't work, you will have to use two remotes.

I hope I've provided you useful assistance and that this information allows you to make an informed decision as to how to proceed from here. Please be sure to vote on my response. I hope I've earned a good rating from you today.

Please post a comment if you need additional assistance so that I can help you further

Aug 05, 2009 | Standard (CRT) Televisions

1 Answer

How did you get the sylvania tv into game mode with out remote


I had to use a dishnetwork remote that I had lying around. You also may able to program a direct tv remote, replaytv remote or universal remote. I have found that putting it into 'game mode' does not work. You will not be able to change the input without a remote.

Here are the instructions for the dishnetwork remote I was using (may differ slightly from yours):


Sylvania Television codes: 733, 506, 525, 536, 566, 568, 569, 573, 600, 610, 652, 654, 656, 659, 660, 664, 665, 666, 671, 672, 674, 677, 723, 724, 729

1. Verify the remote is a DISH Network remote. Look for the DISH Network logo on the bottom of the remote and Mode buttons or lights at the top. Why?

We have the codes for all DISH Network remotes and would be happy to help you with your DISH Network manufactured remote. Please contact the manufacturer of your remote for further assistance. Detailed instructions may be included in the owners' manual that came with your equipment. If not, there may be a toll-free technical support number listed.

2. Look up the Code(s) for the piece of equipment you are trying to address. If the equipment is not listed or a Power Scan is desired click here.
3. Press and hold the correct Mode button (about six seconds) until all mode button backlights come on, then release.
4. Use the number buttons to enter the three digit number (four digit for AUX mode) corresponding to the equipment. The light will blink off after each digit is entered and then return to a steady light.
5. Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times.
6. To verify the code works, press the mode button. Then try several different functions for that equipment. Some codes may provide partial function, or respond differently than the button's titled function. Try the other codes listed for that device until you find one that offers more complete functionality.
7. Store the remote code for future use.
8. If the remote still does not operate the device, perform the Power Scan. If still no operation, it may not be compatible with that piece of equipment.

Jul 03, 2009 | Sylvania 6427TE 27" TV

1 Answer

What is this tv's setup code? Needed for Comcast cable box opera


are you sure that your comcast remote requires xxxxx 5 digits for the TV code ?
10054 ?

most remotes use 4 digit codes and in my book, the philips codes are:

0054
1454
0690
1154

try these
and if you are sure that the comcast remote uses 5 digit codes then try these

10054
11454
10690
11154

make sure you get the Red LED code entered Confirmation Blink after entering the code digits.

its either a double blink or a Long Solid blink

if you have 4 digit codes it will blink before can enter the 5th, so you will know


Ed

Jun 16, 2009 | Philips 13PT30L 13" TV

2 Answers

Progamming Comcast remote


Go here, it has a viewable manual for the comcast remote and a list of codes. There is also a way to search codes listed. Haven't tried yet, but it can't hurt trying!

http://www.scribd.com/doc/202024/comcast-dvr-remote-manual

Sep 08, 2008 | Sanyo DS20930 20" TV

1 Answer

Code for PROVIEW Television


There should be a list on the DISH network website.

Try this:
http://www.carltonbale.com/project/dish-network-universal-remote/

or

http://www.dishnetwork.com/content/faq/remotes/index.shtml

(this last one has links to remote control lists depending on the color of the buttons; around middle of page)

Jul 04, 2008 | Zenith B27A11Z 27" TV

3 Answers

Remote controls


have your problem fixed get a / one for all / remote controe it has the tv in that you have in the list cost little to nothing to get it go to wall mart please reply thanks p.s. rca dont have codes for that tv all for one does

Mar 28, 2008 | Durabrand DWT1905 TV

4 Answers

Comcst remote control code not working


comcast dvr3 remote code for jensen sc2050j is 0150 gil_hodges@bellsouth.net

Jul 27, 2006 | Jensen TS2050J 20" TV

Not finding what you are looking for?
GE 24GP653 24" TV Logo

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Standard (CRT) Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

The Knight
The Knight

Level 3 Expert

68301 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a GE Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...