After entering wrong code more than 3 times
now it doesn't accept the code, what to do to make it accept the code ? (displays 4 lines in display instead of word CODE and doesn't accept the input of the old code, which i found now), so what to do?
remove the battery for some time doesn't help.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
by default you have 3 chances to enter your code, after then time is get much longer for you to wait. what you can do is still keep your radio power on and leave it for 1 hour, Do not power Off. the cycle of wait will reset. then you can try enter you code again. hope its help.
Press and hold AS button * and the ON button at the same time
Display Shows SAFE then goes to 10 - - - - with a "Beep" from the speaker
Press Preset Button " 1 "repeatedly until the 1st Digit of your Code is displayed
Press Preset Button " 2" repeatedly until the 2nd Digit of your Code is displayed
Press Preset Button " 3" repeatedly until the 3rd Digit of your code is displayed
Press Preset Button " 4" repeatedly until the 4th Digit of your code is displayed
If the display now shows the correct Code number then
Press Button AS and hold to Enter and if successful there should be a "Beep" from the speaker and the radio should switch on
This is usually caused by the wrong code being entered 3 times in a row.Turn your accesory on and leave the the radio on for apx 3 hours then it should clear and accept your code. In the mean time try to get the correct code.
leave it switched on..undisturbed for as long as it takes to automatically reset itself.
If your radio is a BP Lausanne then the code entry instructions are
Blaupunkt Lausanne CD30 Code Entry
Turn on the radio, the display will
show 'CODE' followed by '0000'
Press preset [ 1 ] repeatedly for
the first digit Press preset [ 2 ] repeatedly for the second digit Press
preset [ 3 ] repeatedly for the third digit Press preset [ 4 ]
repeatedly for the fourth digit
Blaupunkt Boston CC-22 Code Entry Turn on the radio, the display will show 'COD'
Press preset [ 1 ] repeatedly for the first digit followed by [ station + ] Press preset [ 2 ] repeatedly for the second digit followed by [ station + ] Press preset [ 3 ] repeatedly for the third digit followed by [ station + ] Press preset [ 4 ] repeatedly for the fourth digit followed by [ station + ]
QHave you tried with failed attempts at all? I found this about the radio
I know I have the correct code but the radio
does not do anything when I try to enter it.
It is likely someone has tried to enter a
code or accidentally entered a number by pressing the radio preset station
Most radios will enforce a delay between code entry attempts which increases
(doubles in some cases) with every try. These radios need to be left
completely untouched, until they are ready to accept the correct code.
Others give a maximum number of attempts - usually 10 to 13 tries after
radio must be decoded.
Blaupunkt radios will often enforce a delay of 1 hour between code entry
attempts during which time be careful not to press any keys or the 1
hour waiting period begins again. The display should change after the
hour, indicating it is ready to take the code.
I will keep seeing if there is anything else that you can do
HY ACORDING TO THE MANUAL YOU SHOULD TURN THE IGNITION ON SWITHCH THE RADIO OFF PRESS THE AS BUTTON WHILE YOU TURN THE RADIO ON,AFTER 5 SECONDS YOU SHOULD HER A BEEP AND ON DISPLAY YOU CAN SEE 10SAFE AFTER 5 MORE SECONDS YOU SHOULD BE ABLE TO ENTER YOUR CODE USING FIRST FOUR BUTTONS FOR 0-YOU PRESS ONCE AND SO ON WITH THE OTHER DIGITS.