Question about Whirlpool LSR7333 Top Load Washer

2 Answers

Washer makes loud thumping after finished spin cycle

My top loading Whirlpool washing machine makes a loud thumping sound at the end of the first spin cycle as it is winding down just before refilling for the rinse cycle. It doesn't do it any other time or at the end of the final rinse/spin cycle. It's not the noise that an unbalanced load makes and it doesn't last long - just as the spin is finishing. My washer is balanced and doesn't "walk" even with an unbalanced load. Does anyone know what is making the thumping noise? Thanks for any help.

Posted by on

  • Anne Morrissey Jul 07, 2012

    I had the same problem and replaced the drive block (easy to do) and it solved the problem. There are videos of how to do it on uTube.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I replaced the drive block and it solved my problem. (thumping noise at the end of spin cycle) Easy repair. Videos on utube show all the steps.

Posted on Jul 07, 2012

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 641 Answers

Remove washer cabinet (easy to remove)and check that "base pads" (there are 3 pads, located under the main tub)are not worn. In case they are worn (even one of them), you should replce them all. Good luck !!

Posted on Jun 07, 2006

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My whirlpool duet washer hammers very loud when it spins. The outside of the machine doesn't seem to vibrate much but it is very loud.


That is a common occurrence with dryers such as this one. Even though it sounds bad, it is harmless. If it really bothers, you can re-balance the load and it should reduce the vibration.

Jul 29, 2008 | Whirlpool Washing Machines

2 Answers

Whirlpool washing machine make loud noise after spin cycle quits. Noise continues until cycle winds down. Sounds like a machine gun being fired


Hello,have to tell you that most noises from a washing machine occur during the spin cycle. If you hear loud thumping noise during the spin, the load of cloth may have become unbalanced. Stop the washer and redistribute the cloths, then restart the machine. Repeat these steps if necessary.

Thanks



Jun 04, 2010 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Loud banging noise during rinse


Most noises from a washing machine occur during the rinse or spin cycle. If you hear loud thumping during the spin, the load of clothes may have become unbalanced. Stop the washer and redistribute the clothes, then re-start it. Repeat these steps if necessary.This will solve your problem.

Apr 08, 2010 | Whirlpool GHW9100L Front Load Washer

1 Answer

Loud thumping while stopping after spin cycle.


make sure the shiping rod is out it will do that if it,s not out

May 29, 2009 | Kenmore 22422 Top Load Washer

1 Answer

Noisy Spin Cycle


hi there,

Most noises from a washing machine occur during the spin cycle. If you hear loud thumping/or sound
during the spin, the load of clothes may have become unbalanced. Stop the washer and
redistribute the clothes, then re-start it. Repeat these steps if necessary.

Jun 12, 2008 | Whirlpool LSR9434PQ Top Load Washer

1 Answer

Whirlpool washer problem


run the waher in a high spin and lift the lid repeat this three or four times and your brakes will free up and begin working again

Feb 18, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Loud Noise at the End of the Spin Cycle


some item has fallen down between the outer and inner wash tubs? remove it

May 20, 2007 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Thumping sound at the end of spin cycle.


Rankine, sounds more like a worn drive block that sits under the basket. Usually the brake will not make a thumping sound. Attached is a couple of pictures. Check this out first...Catriver..post back.

Jan 16, 2007 | Kenmore 24852 Top Load Washer

Not finding what you are looking for?
Whirlpool LSR7333 Top Load Washer Logo

2,065 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Sal De

Level 3 Expert

2699 Answers

Marvin
Marvin

Level 3 Expert

81285 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...