Request Sir everytime I start my PC a message displays as follows- Script:C:\Documents and Settings\All Users\Start Menu\Programs\Start Up\.vbs Line:1 Char:1 Error:The system cannot find the file specified. Code:80070002 Source:(null)

• Press ctrl + alt + del
• Select task manager
• Click on the Start Up tab
• Disable the entry associated with this vbs script

If you use the number pad frequently during your daily computer usage, you may want to have the "Num Lock" key enabled when the computer starts up.
You can enable Num Lock automatically in two different ways: one involves modifying a value in the registry and the other requires you to create a small script in Notepad.
Activate Num Lock Through the Registry
Enter the registry and navigate to "HKEY_CURRENT_USER\Control Panel\Keyboard\." Double-click on the value labeled "IntitialKeyboardIndicators," which has a value of 0,1 or 2.
Change the value to "2" to turn Num Lock on after logon, "0" to turn Num Lock off after logon and "1" to disable Num Lock.
Create a Num Lock Script
Configure a script that runs to automatically change the Num Lock state.
Depending on where you place the script, you can activate the script for a single user or all users on the computer. Open Notepad and paste the following code
"set WshShell = CreateObject("WScript.Shell")
WshShell.SendKeys "{NUMLOCK}"
Save the file as "numlock.vbs," including the quotes to change the notepad file to a script.
Paste the file in the directory "Documents and Settings\All Users\Start Menu\Programs\Startup" to enable Num Lock for all users by default.
For a single user, copy it to their startup folder instead of All Users.
Enter the BIOS
Enter your computer's BIOS before Windows boots up to change the integrated Num Lock settings.
Depending on your motherboard manufacturer, different key combinations allow you to access the BIOS.
Common keys include "F1," "F2," "Del," "ESC" or "F10."
Consult your computer's documentation for specifics.
Navigate through the basic or advanced options until you find a section dedicated to enable or disable Num Lock on boot.
Enable in Linux
Linux is an alternate operating system.
While the BIOS method may work for Linux, you can also change the process through the options if using KDE Linux.
Navigate to "Control Panel" and click "Peripherals." Select "Keyboard" and select the option "Turn on" under the heading labeled "NumLock on KDE Startup."

How to Set the NUM LOCK State at Logon in Windows XP
http://support.microsoft.com/kb/314879
How do I enable the NUM LOCK key for the logon screen
http://support.microsoft.com/kb/154529

Step 1:
If you use the number pad frequently during your daily computer usage, you may want to have the "Num Lock" key enabled when the computer starts up. You can enable Num Lock automatically in two different ways: one involves modifying a value in the registry and the other requires you to create a small script in Notepad.

Activate Num Lock Through the Registry Enter the registry and navigate to "HKEY_CURRENT_USER\Control Panel\Keyboard\." Double-click on the value labeled "IntitialKeyboardIndicators," which has a value of 0,1 or 2. Change the value to "2" to turn Num Lock on after logon, "0" to turn Num Lock off after logon and "1" to disable Num Lock. Create a Num Lock Script Configure a script that runs to automatically change the Num Lock state. Depending on where you place the script, you can activate the script for a single user or all users on the computer. Open Notepad and paste the following code "set WshShell = CreateObject("WScript.Shell") WshShell.SendKeys "{NUMLOCK}" Save the file as "numlock.vbs," including the quotes to change the notepad file to a script. Paste the file in the directory "Documents and Settings\All Users\Start Menu\Programs\Startup" to enable Num Lock for all users by default. For a single user, copy it to their startup folder instead of All Users. Enter the BIOS Enter your computer's BIOS before Windows boots up to change the integrated Num Lock settings. Depending on your motherboard manufacturer, different key combinations allow you to access the BIOS. Common keys include "F1," "F2," "Del," "ESC" or "F10." Consult your computer's documentation for specifics. Navigate through the basic or advanced options until you find a section dedicated to enable or disable Num Lock on boot. Enable in Linux Linux is an alternate operating system. While the BIOS method may work for Linux, you can also change the process through the options if using KDE Linux. Navigate to "Control Panel" and click "Peripherals." Select "Keyboard" and select the option "Turn on" under the heading labeled "NumLock on KDE Startup."

How to Set the NUM LOCK State at Logon in Windows XP
http://support.microsoft.com/kb/314879 How do I enable the NUM LOCK key for the logon screen http://support.microsoft.com/kb/154529

IT seems the starts.vbs file is located in your startup folder which forces it to run when windows is starting.
Kindly check the following folder:

If you are using Windows XP you need open "C:\Documents and Settings\%username%\Start Menu\Programs\Startup" and delete each and every file inside this folder.

If you are using you can find the startup folder here: C:\users\%username%\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup

You can type the above path in windows run box which you can access by pressing the Windows key + R (Windows key is located right at the bottom of your keyboard next to Alt.

Note: while typing the path replace "username" with your windows login name

Hope this will help you to resolve your issue.

Feel free to revert for any kind of further assistance

Hi, what basic info exactly are you talking about?
Computer owner / organisation?

If you would like to use a script to change your owner / organisation, please follow the steps below.

NOTE: Executing a .VBS script is usually not a good idea, unless you know what you are doing. Please carefully follow the instructions below.

Below is a custom script made to change your owner/organisation.
Press Start->Run
type notepad.exe, press Enter

copy and paste the following:

'ChgOwnOrg.vbs - Change Win9x Registered Owner/Organization.
'© Bill James - billjames.geo@yahoo.com - rev 29 Oct 1999.
'Modified for Windows XP

Option Explicit

Set ws = WScript.CreateObject("WScript.Shell")
Dim ws, t, p1, p2, n, g, cn, cg
Dim itemtype

p1 = "HKLM\Software\Microsoft\Windows NT\CurrentVersion\"

n = ws.RegRead(p1 & "RegisteredOwner")
g = ws.RegRead(p1 & "RegisteredOrganization")
t = "Change Owner and Organization Utility"
cn = InputBox("Type new Owner and click OK", t, n)
If cn <> "" Then
ws.RegWrite p1 & "RegisteredOwner", cn
End If

cg = InputBox("Type new Organization and click OK.", t, g)
If cg <> "" Then
ws.RegWrite p1 & "RegisteredOrganization", cg
End If

--- Stop copying here. DO NOT COPY THIS LINE ---

If you feel at all unsure, do not run this script. All it does it change your Owner and Organisation of the computer.

Save that file (in notepad) as "Change Info.vbs"
Note that you will have to change the "Save as type" to "All Files"

After you are done saving it, close notepad and double click "Change Info.vbs" and it will ask you to enter first your name, and then your organisation.

If this wasn't what you were asking about, or if you don't want to run a .vbs script (I can understand), please let us know.

http://www.computernerdforrent.com/virus.html, if you go on the site above you can scan and repair your computer online.

http://global.dymo.com/enGB/Troubleshooting/LabelWriter_320.html

From this site.

• • The error message: "Exception Eprinter in module LABELS.DLL at ...." is displayed.
    or
    The error message: "Access violation at address ... in module DYMOLBL.EXE" is displayedA. This problem can occur when DLS 7.x was installed over DLS 6.x, without first uninstalling DLS 6.x.
    Solution:
    Delete the file Dymolbl.ENG.
    DLS will still work, however, all default settings will be incorrect.
    
    The settings will need to be set correctly.
    On the DLS menubar, click Preferences and set the preferences as desired.
    The default values are:
    Default label file folder should be set to "C:\Documents and Settings\All Users\Shared Documents\DYMO Label\Label Files"
    Default address book folder should be set to "C:\Documents and Settings\All Users\Shared Documents\DYMO Label\Address Books"
    Default clipart folder should be set to "C:\Documents and Settings\All Users\Shared Documents\DYMO Label\Clipart"
    
    B. An incorrect printer has been selected in the DYMO software.
    Solution:
    1. Start the DYMO Software.
    2. Click on File and point to Change printer.
    3. Click the LabelWriter model connected to the PC (e.g. Dymo Turbo)
    
    
    C. Occasionally, double-clicking the print command button in the list manager is not handled properly by the software.
    Solution:
    Single-click the print command button.
    
    
    D. An incorrect driver has been installed.
    Solution:
    Run the DYMO Driver Uninstaller
    Restart the PC and install the correct driver.
    
    To remove and reinstall the printer driver:
    1. On the Windows taskbar, click Start, point to Settings and click Printers (& Faxes).
    The printers window is displayed.
    2. Double-click the LabelWriter icon and delete any documents waiting to be printed.
    3. Close all programs.
    4. On the Windows taskbar, right-click on Start and click Explore.
    Windows Explorer is started.
    5. Double-click the file C:/Program Files/DYMO Label/Support Files/LW Remove.exe
    6. Unplug the LabelWriter's USB connection from the back of pc and click OK.
    7. Choose Select all and then remove.
    Once the driver has disappeared from the printers dialog box, click Close.
    Restart the PC.
    8. When Windows has restarted, on the Windows taskbar, click Start, point to Programs, point to DYMO Label and click Uninstall DYMO Label.
    9. Reconnect the LabelWriter to the computer and reinstall both driver and software.
    

My friend that is VIRUS I think.

Win32.VBS.Indra.01 is Trojan Creator - spyware.
You should remove it from your system as soon as possible.
This Trojan Creator is also known as: •Virus Constructor - named by Panda.

I guess this is a Startup item on your computer and you can easily remove this from your computer by going in to the registry. But, before that to make sure you can try disabling it from the system configuration utility..

In order to do that, click Start -> Run -> Msconfig -> Ok
Click Startup tab and look for the entry boot.vbs..
Simply clear the check box and restart the computer..

Lemme know the result.. if it works then i can assist you in removing it permanently.

hi my friend got that last week to... ehat you need to do is download kaspersky. after running kaspersky. that will be gone. you can download kaspersky @ majorgeeks.com Here are some examples of autorun viruses which rely on the autorun function of Windows to infect PC’s and flash drives. Funny UST Scandal.avi.exe Autorun.vbs win32.autorun.k copy.exe imgkulot taga lipa are autorun.vbs recycler FS6519.dll.vbs strawberry from baguio W32/Perlovga (copy.exe | host.exe) VBS_RESULOWS.A Bha.dll.vbs w32automa worm (Autorun.vbs) Trojan.Win32.VB.atg | Win32/Dzan | Worm_vb.bnr (tel.xls.exe | mmc.exe) W32/RJump.worm (RavMonE) Worm.Win32.Delf.bf | W32.Fujacks (spoclsv.exe) W32.Fujacks.BH (****.vbs) WORM_AGENT.PGV (soundmix.exe) W32/Hakaglan.worm (RVHost.exe) Trojan.Win32.VB.ayo [AVP] (Macromedia_Setup.exe) Trojan.VBS.DeltreeY.b#1 (Destrukto!!! | destrukto.vbs) if you want to manually delete it... Solution is here: 1. Start Notepad [Start Menu-All Programs-Accessories-Notepad] or right-click any empty space in your desktop then select New-Text Document 2. Copy the following text. (note: Everything in between the square brackets should be in one line) REGEDIT4 [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionIniFileMappingAutorun.inf] @="@SYS:DoesNotExist" 3. Save the file with a name (anything) like DisableAutoRun.reg (The extension .reg is the important part) 4. Double Click your newly created registry file. Choose yes or continue to the warning that will appear. hope this helps