I need Remote code for Philips/Magnavox TV

You can use code search to find something that works. If a search through all codes stored in the remote fails, you may have to try a different universal remote (such as Philips). All universal remotes do not store all possible codes.

www.sciatl.com/ExplorerClubGuides/getting_started/4001707.pdf This should get you going

Hello
Setup codes to check with Magnavox TV to Magnavox remote control are:
002 009 109

118 209 309 402 408
502 508 510 807 914 917
OK.

if you follow the link to the GE website you should be able to find the code for your TV
http://www.jascoproducts.com/support/universal-remote-codes.asp

Here are some sites that will have your codes and instructions on how to enter them:

1. Universal TV Remote Control codes Universal remote control codes for all TV and VCR brands including: at&t, beery systems, bondwell, curtis mathis, dish network, ge, gemini, ...
   www.tvcodes.com/ - 23k - Cached - Similar pages -
2. Universal Remote Control Codes Universal Remote Control Codes for DVD, VCR, TV and Home Theaters System.
   www.remote-codes.com/ - 7k - Cached - Similar pages -
3. Philips Magnavox Universal Remote Code Philips Magnavox Universal Remote Code - Instructions on how to program your Philips Magnavox universal remote control.
   www.universal-remote.net/philipsmagnavox.html - 35k - Cached - Similar pages -

Go to the following page to get information on how to program your GE remote:
http://www.jascoproducts.com/support/download-files/GE-Universal-Remotes-Instructions.pdf

Codes for 4 digit remotes:
PHILIPS ............. [0371] [0344] [0345]

Codes for 3 digit remotes:
PHILIPS ............. [734] [743] [744] [745] [755] [814] [823] [824] [825]

Thank you for using Fix Ya!
Good Luck!
If you have any other questions, just let me know!

Don't forget to rate the overall satisfaction of this solution.

http://www.urc.philips.com/

http://www.remotecodelist.com/remotes/magnavox/Philips-Magnavox_PM525S.pdf
This is the user's manual for a Phillips remote control. There is a list of codes in it. They should be rather universal. There's also instructions as to how to program it. I believe that there is a way to program it without using the codes.

Programming with Code Search

1. Manually turn on the device (TV, VCR, etc.) to be controlled.

2. Press and hold Code Search button until the red indicator stays on. Release the Code Search button.

3. Press and release the desired mode button (TV, VCR, etc.). The red indicator blink, then stays lit.

4. Press the Channel Up button repeatedly (up to 300 times) until the device could be controlled changes channel. The red indicator blinks, then stays lit. If you accidentally overshoot the code required, press the Channel Down button to backtrack through the library until the device changes channel. Pressing Channel Up changes direction to forward again. Press and release the Mute button to install the code.

Hope this helps :)

Try these GE codes 002 006 007 018 107 114 310 312 502 601 704 719 803 806 810 901 911

i lost my code book for my ge remote control