Question about Electric Stanley Tre500 Staple Gun / Sharpshooter

1 Answer

Installing brad nails

How install brad nails in stanley tre500 ?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Pull the clip in the loader slot. Insert staples point side down. Slide loaded loader clip into place till you hear a click. You are now ready to staple! Enjoy, and make sure to staple the dog somewhere funny.

Posted on Oct 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I load the stapler?


No you don't. We answer most things here.

If the stapler is like any of these

http://www.amazon.com/s?ie=UTF8&page=1&rh=i%3Aaps%2Ck%3Abostitch%20staple%20gun

You push the back in slightly to unlatch it and then drop it down a bit and the staple pusher comes out completely.

Jan 28, 2016 | Heavy Duty Stanley Bostich Heavy-duty...

1 Answer

Can i use 3/4 inch brad nails in my stanley tre500 sharpshooter?


Morning Rhonda,

According to Stanley's own website, the TRE500 will only use either 1/2" or 5/8" brads.

Regards
Alex Bostitchtools co uk Bostitch Nailers Staplers Fasteners Coil Nails Staples

Mar 31, 2015 | Electric Stanley Tre500 Staple Gun /...

1 Answer

HOW TO LOAD BRADS IN STANLEY TRE500


Please download the instruction sheet from the following link which explains how to load the brads. Make sure you have the correct size of brads mentioned at the bottom of the instruction sheet.

TRE500 Sharpshooter Stapler Instruction Manual

Aug 13, 2014 | Electric Stanley Tre500 Staple Gun /...

1 Answer

My stanley tre500 shoots like a semi automatic weapon. Is it adjustable? Thanks Nancy


Hi Nancy,

Do you mean it rapid fires, or do you mean fires the staples to deep?
If it fires too deep, the adjustment for that is on the back of the gun. The + and - give more/less depth. Adjust it towards the - direction to get the brad/staple to no penetrate as far.

Thanks,

Handie Andie

Jun 16, 2011 | Electric Stanley Tre500 Staple Gun /...

1 Answer

What to know if there is 1/4 inch brads for the TRE500 sharpshooter?


This tool only accepts brads from a minimum length of 12mm (half inch). It will accept staples from 6mm though. (quarter inch)

Mar 17, 2011 | Electric Stanley Tre500 Staple Gun /...

1 Answer

How to load brad nails


UNPLUG
look for image of brad nails on tool, load this side only.
Hold upside down.
Pull base back, and swing open......
Be sure they dont fall out, and make sure to use hi power ONLY.

Feb 14, 2011 | Electric Stanley Tre500 Staple Gun /...

2 Answers

Dont know how to load brads


You put the brads in along one side but otherwise they go in just like the staples. Mine is a different brand so I don't know which side for sure but if one side area is deeper that's the side the brads go on.

Mar 27, 2010 | Electric Stanley Tre500 Staple Gun /...

1 Answer

Installing nail brad in a stapler


I have the same problem and the silly thing is I have used it. Ridiculous that you can't find a manual on it. Well, I have solved it!!!!

our problem is we open the stapler and stare straight down into the cavity. But if you angle it, you can see that there are grooves along the side which the head of the brads would hang and slide along.

1. on one side of the stapler it will say "load brad this side"
2. open the chamber and place the stapler on its side with the aforementioned side down
3 place your strand of brads in the appropriate groove and close the chamber
4 start shooting

pklew52@gmail.com

Dec 22, 2008 | Electric Stanley Tre500 Staple Gun /...

1 Answer

Installing nail brad in a non elecctric stanley nailgun


find the side of the stapler which says "load brad this side"
open the loader with the aforementioned side facing down
as you look down on the inside wall, there are grooves which the heads of the brads will rest on and will slide along.
close the chamber and you're ready to shoot.

Dec 22, 2008 | Electric Stanley Tre500 Staple Gun /...

Not finding what you are looking for?
Electric Stanley Tre500  Staple Gun / Sharpshooter Logo

Related Topics:

1,071 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electric Staple Guns Experts

Mike Carew

Level 3 Expert

958 Answers

Kerri Trelford

Level 2 Expert

197 Answers

Vernon Taylor

Level 3 Expert

2029 Answers

Are you an Electric Staple Gun Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...