Question about HP PSC 1315 All-In-One InkJet Printer

1 Answer

Can't eject memory card

I cannot eject the memory card by pushing in. Is there another way?
Help? Help, please! I took the memory stick (if this it the right term) from my little digital camera and put it into my HP printer. It's a printer/scanner. I did this so I could print out one of the pictures on it, one that, for some reason, would not show up in the folder where I have all the other pictures from it. To make a long story short, Now this little disk is still in the printer and I have no idea how to get it out to put it back into my camera. There seems to be no ejection button, I have looked through all my options on both the printer and my picture browser but cannot find anything. I have tried turning the printer off, hoping it would eject it, but no such luck. Would anyone know what I can do to get the thing back out? Thank you.

Posted by on

  • morgana308 Oct 18, 2008

    Help, please! I took the memory stick (if this it the right term) from my little digital camera and put it into my HP printer. It's a printer/scanner. I did this so I could print out one of the pictures on it, one that, for some reason, would not show up in the folder where I have all the other pictures from it. To make a long story short, Now this little disk is still in the printer and I have no idea how to get it out to put it back into my camera. There seems to be no ejection button, I have looked through all my options on both the printer and my picture browser but cannot find anything. I have tried turning the printer off, hoping it would eject it, but no such luck. Would anyone know what I can do to get the thing back out? Thank you.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 385 Answers

Hi,

Press the card in slowly, but firmly, until it clicks,
then it will release,

All the best
Regards.

Posted on Apr 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i save pictures from computer to memory card


your card is protected you see card top left or any side you see a knouch button just change location of button u unlock your memory card and do the thing which u want

May 23, 2012 | Office Equipment & Supplies

1 Answer

Can the memory card reader in the HP C5150 printer read a sdhc memory card?


Hi,

Your printer only supports the following:
Memory Stick, Magic Gate Memory Stick, Memory Stick Duo
(with user-supplied adapter), Memory Stick Pro, xD-Picture Card, Secure Digital, MultiMediaCard (MMC), Secure MultiMedia Card, CompactFlash (I, II).

But, you can use your SDHC memory if you purchase an adapter for it or a card reader so you can connect it to the computer and print whatever you need to print.

Thank youfor visiting FixYa! We answer yourconcerns promptly for FREE. Please spare a few seconds toclick on YES button and leave ashort comment in return. Have a good one!

Jul 20, 2011 | HP Office Equipment & Supplies

2 Answers

Does the canon pixma mp 500 printer recognize sdhc memory cards?


No, it doesn't support SDHC, the following card types are supported by Canon MP500 :
CompactFlash®, Micro Drive®, SmartMedia®, Memory Stick®, Memory Stick Pro ™, SD Card™ and MultiMediaCard™
And these are the cards which can be used with respective adapters:
xD-Picture Card™, Memory Stick Duo™ Memory Stick Duo Pro™, miniSD™ card
Hope this helps.
Let me know if you need further help.
Good Luck.
Thanks for using FixYa.

Apr 17, 2011 | Canon Pixma MP500 All-In-One InkJet...

2 Answers

My hp officejet 7210 all in one will not read my SDHC memory card for my new Panasonic camera. Why? Should I purchase just a SD memory card? Will that work?? Thanks


Purchasing an SD card might be better. Just for the fact that when your printer was manufactured the technology for SDHC cards were still not incorporated in your printer.

Feb 06, 2011 | HP Office Equipment & Supplies

1 Answer

Memory stick stuck in Canon Pixam MP500 printer


Push on the memory stick and see if it ejects back at your finger. If not, tug hard. Although this is not the best method.

Dec 12, 2009 | Canon Pixma MP500 All-In-One InkJet...

1 Answer

Cannot eject meory card


Perhaps the memory card has got stuck. you should use memory card readers always to use memory cards. Anyways try to use any plucker to try and take the Memory card. if that does not work call kodak @ 1800 421 6699 and they will replace the printer for yoy free of cost . But you will not be able to get the memory card back.

May 15, 2009 | Kodak ESP 5 Printer

1 Answer

Remove memory card HP PSC 1610 All-in-One


Usually the memory cards fit in with a push. But if you push them further in one more time, they are ejected. Do let me know if that worked or not. Otherwise I will search for some other step.

May 14, 2009 | HP PSC 1610 All-In-One InkJet Printer

1 Answer

How to use the memory card reader


To access the memory card reader without using the software provided, follow the steps below. If no card is inserted, the green light on the card reader will be on.
Insert a memory card.
• Insert the card with the brand name label facing up.
• If there is an arrow on the card, make sure it points toward the printer.
• If needed, make sure you connect the memory card to the adapter that came with it before inserting it into
the slot.
Wait for the light located to the right of the slots on the printer to come on. The light blinks to indicate the memory
card is being read or is transmitting data.
• The printer recognizes one memory card at a time. If you insert more than one memory card, a message appears
on the display prompting you to remove all memory cards inserted.
• If a USB flash drive is inserted together with the memory card, a message appears on the display prompting you
to choose which memory device to use.
When reading of images is complete, the number of photos found appears on the display. Then you can make your selection and print. these are the types of memory card supported by you printer.
xD-Picture Card
• Secure Digital (SD)
• Secure Digital High Capacity (SDHC)
• Mini Secure Digital (with adapter)
• Micro Secure Digital (with adapter)
• MultiMedia Card (MMC)
• Reduced Size MultiMedia Card (with adapter)
• MultiMedia Card mobile (with adapter)
• Memory Stick (MS)
• Memory Stick PRO
• Memory Stick Duo (with adapter) or Memory Stick Duo PRO (with adapter)

Mar 18, 2009 | Lexmark X5495 All-in-One &USB...

1 Answer

The cards are sticking


Hi There,

Im_useless:
0.126 is not a Magicard error number. On a Rio 2 printer, the error number will be displayed on the LCD display. It should look like 02:?? or 04:??, etc.

Are the cards feeding out of the hopper?
How far into the printer have they gone before you get the error?
Are any of the dye film panels printed before the card gets stuck?
Are the cards ejected when you click on 'OK'?

Guest:
The most common reason for the dye film sticking to the cards are if they already have overcoat printed on them (you can not print over overcoat). Also, if you are printing very dense images, try selecting 'ColorSure' mode in the printing preferences, Try reducing the YMC printhead power in printing preferences.

Nov 30, 2007 | Magicard Rio ID 2 Card Printer

2 Answers

Memory card.


Supported Flash Memory Cards: CompactFlash Card type I, CompactFlash Card type II, Memory Stick, Memory Stick PRO, Microdrive, MultiMediaCard, SD Memory Card, Memory Stick Duo, xD-Picture Card, Memory Stick PRO Duo

 

Your phones card is a RS-MMC type not combatable, wont fit, no eject on printer, card too small for slot, wrong type

 

Power off carefull tweezer hunt or bluetac on a match, happy hunting

Oct 19, 2007 | Office Equipment & Supplies

Not finding what you are looking for?
HP PSC 1315 All-In-One InkJet Printer Logo

Related Topics:

334 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Vinaya Kumar...
Vinaya Kumar...

Level 3 Expert

1121 Answers

Seeker5211
Seeker5211

Level 3 Expert

1088 Answers

kakima

Level 3 Expert

98608 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...