Question about Projection Televisions

Open Question

Samsung SP43W6HPX\XEU Rear projection

Can you help,

When i switch on TV red led blinks 10 times have no sound.

after 20 mins sound comes off and on and eventually works fine then dissapears. i have a samsung SP43W6HPX\XEU Rear projection tv has power when turned on but no picture or sound seem to be on standby mode. could anyone pls help

Posted by on

  • carlsean30 Jan 25, 2009

    hi same problem seems to try and turn on then beeps and nothing?model sp43w6hpx iv been told by a frield possably lopty?what that is i dont know but any help would be greatfuly recived?

×

1 Suggested Answer

ctf1800
  • 4402 Answers

SOURCE: samsung SP43W6HPX\XEU Rear projection

HLP, HCN HL-S The Start-up Problem or/and
3 LEDs in the front blinking.

Unplug the set, pull out the lamp module (not all the way - leave it on the track) and push it back in.

Power issues (Tv not turning on) were typically due to faulty ballast. While the TV reports a bad lamp it is the ballast itself causing the issue. Samsung is well aware and will replace both the ballast and the lamp (since the lamp can be prematurely aged but the bad ballast). After replacment most people stop having issues.

Posted on Feb 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Having trouble with samsung projection tv / sp43w6hpx/xeu. done manual convergence and got the picture and colour nearly right but across the top half the tv the picture is bend upward/ what kinda part...


Look for 2 big black ICs they will have the Part number on them,example STK392-110
Mats Electronics has them replace Both ICs. 1-800-628-1118 also in front of ICs is 2 resistors low ohm 2.7 or 3.9 replace them.

Mar 01, 2011 | Samsung Projection Televisions

1 Answer

The screen went black. Last time I changed the bulb and it started working. This time the TV did not come back. The screen is black. The center Green light and the bottom red light blink. Samsung 567W


Make sure properly connected and tightly sure cover put on and screws in,if change projection bulb,still blinking "LAMP" LED indication light.But,if "LAMP"LED indication flashes and making clicking noise.Ur Ballast board also dead.Require replacement,this Ballast board help to ignite the projection bulb.

Jul 30, 2010 | Samsung HLN567W 56" Rear Projection HDTV

1 Answer

Hai i am in india.my sony projection model fx532


Hello Anand,
                  Arrcoding to the led blinks 10 time indication here find the possible causes of this indication hope this will help you.

 The diagnostic description is
• HV protection 

And possible areas and parts are as fallows.

1-• Q8014 or Q6013 have shorted replace along with R8051 on D board.
2- • IC8005 is damaged. (D board).

Thanks.

Nov 24, 2008 | Sony Grand WEGA KDF-50WE655 50" Rear...

1 Answer

Samsung sp43w6hpx/xeu


Convergence is out. Go to service menu and set it.

Dec 23, 2007 | Samsung HCN436W 43" Rear Projection...

6 Answers

Sony KP-FX432M91 TV 10 blinks


my sony kp-fx432m91 has a 10 blinks problem. it has no pictures but has sound that goes off after 5 seconds please advice on what to do.

my email address is drbonnyb@yahoo.com

Oct 31, 2007 | Sony KP-FX532M91 TV

1 Answer

Samsung SP43W6HPX\XEU Rear projection


HLP, HCN HL-S The Start-up Problem or/and
3 LEDs in the front blinking.

Unplug the set, pull out the lamp module (not all the way - leave it on the track) and push it back in.

Power issues (Tv not turning on) were typically due to faulty ballast. While the TV reports a bad lamp it is the ballast itself causing the issue. Samsung is well aware and will replace both the ballast and the lamp (since the lamp can be prematurely aged but the bad ballast). After replacment most people stop having issues.

Oct 25, 2007 | Samsung HCN4226W 42" Rear Projection...

1 Answer

Samsung sp43w6hpx/xeu


Yes you must go to menu and set the convergenge. It is easy. If it doesnt tune in or set to be ok you must get somebody to set convertions manualy thru service menu.

Hope it help

Aug 10, 2007 | Samsung HCN436W 43" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...