Question about Casio Parts Cash Register PC Desktop
Hi, how do i get the store name to print on the reciept on casio tk-2700
If the store name (logo) is not printing at all, you have to turn it on with bit settings. I have these. Just let me know.
Otherwise, to change the logo, you will need the alphabet programming sheet. this is usually kept under your other paper keysheet on the keyboard. If you don't have one, I can help you to make one.
Turn key to PROGRAM
Type new name for first line
Type new name for second line
Type new name for third line
Type new name for fourth line
SUBTOTAL to finish.
Hope this helps. If you have trouble, just let me know.
Posted on Oct 19, 2008
THIS WORKS FOR THE TK-4300 ; NOT SURE IF IT APPLIES TO YOUR MODEL..
1. TURN THE KEY TO THE PROGRAM POSITION
2. ENTER 2 AND PUSH THE SUBTOTAL BUTTON
3. ENTER LINE NUMBER + 35 AND PUSH THE SUBTOTAL BUTTON
(EXAMPLE: LINE 1 WOULD BE 135-LINE 2 WOULD BE 235 ECT.)
4. TYPE IN THE MESSAGE FOR THAT LINE AND PUSH THE CASH BUTTON
5. CONTINUE ENTERING LINE NUMBERS AND TYPING MESSAGES FOR EACH LINE
6. PUSH THE SUBTOTAL BUTTON WHEN YOU ARE FINISHED
THERE ARE TWELVE LINES OF MESSAGES YOU CAN PUT ON THE RECEIPT TAPE . EACH LINE CAN CONTAIN 21 CHARACTERS. THAY ARE ALLOCATED AS FOLLOWS: LINE 1-4 ARE FOR THE COMMERCIAL MESSAGE ,LINES 5-8 IS THE BOTTOM MESSAGE, AND LINES 9-12 IS THE LOGO MESSAGE.
THERE SHOULD BE A ALPHA CHART UNDER YOUR MENU SHEET
Posted on Oct 17, 2008
Tips for a great answer:
Jun 24, 2016 | Cash Registers & POS Equipment
Jan 26, 2016 | Cash Registers & POS Equipment
Jan 03, 2016 | Cash Registers & POS Equipment
Dec 18, 2015 | Cash Registers & POS Equipment
Remove upper casework:
WARNING! - RISK OF ELECTRIC SHOCK.
Ensure power to the ECR is off and the power cord is disconnected before connecting the interface.
a. Locate the power switch and switch off the ECR. Also disconnect the ECR from the mains supply.
b. Unlock and remove the printer cover (by tilting it up from the front).
c. Remove keys from mode locks etc.
d. Remove the grey name-plate located half way down and to the left of the register.
e. Remove the single screw located behind the panel (bottom right of printer mechanism).
f. Push in the two tabs located either side of the register and slide the top cover forwards. The cover should now lift upwards, away from the register.
g. Move the top cover on to its side towards the right of the register (take care as there are still cables linking the top and bottom halves).
May 28, 2015 | Cash Registers & POS Equipment
Mar 20, 2015 | Casio PCR-T2000 Cash Register
May 25, 2014 | Cash Registers & POS Equipment
234 people viewed this question
Usually answered in minutes!