An expert who has achieved level 2 by getting 100 points
An expert who has answered 20 questions.
An expert that has over 10 points.
An expert whose answer got voted for 2 times.
Re: coolsat 6000 fta connection
If your hooking it up just to ur TV you would need The RCA Video Cable, Video- yellow, Red - right, white is left,Witch is printed on the back of the box, this would go into the output an go in to TV input
Hope it works
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Depends what FTA box you have and what LNB's you have hooked up. Also depends on what your running. There's different fixes out for certain boxes and others are still waiting. Now as for getting them there is a various amount of message boards and websites where you can get them with easy to use instructions with the 'loaders'. Again adding the fixes varies box-to-box, as with some you can upload the fix via USB, others have to be serial connected, and others hook direct into the internet via ethernet cabel (i.e. nFusion).
Newer directv hd receivers must connect to the av input (yellow,red, white) connections on the back/front/side of your tv. If your tv only has one of these av inputs then you will need an RF modulator for your dvd player. You will connect the (yellow,red, white) connections from the dvd player to the rf modulator and then connect the tv out on the rf modulator to the tv rf jack ( the silver threaded barrel on the back of the tv) Tune your tv to channel 3 to watch a dvd and then back to the av input channel for the directv receiver.
I have a sr605 Onkyo receiver and just hooked it up to a new Mitsubishi 73" and I could not get the picture to work, sound did though. Here is the problem the Onkyo is HDMI 1.3 but TV calls for HDMI 1.3a. There is a big difference between the 2 and the Onkyo will not work with TV. The newer model TV'S say in the manual Category 2 V 1.3a. You need to make sure that all your parts are compatable. It makes a big difference.