- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
After going through the menu and choosing user image, view the picture you would like to set as your start image. Press the button with the E on it that is underneath the zoom button. The screen should then show four images across the top, say the word "RESIZE" under that, and have the numbers 7,5,3,and 1 down the left hand side of the display. Below the number one there is an icon of a person and a camera. Scroll down to that icon and press the OK button. Your start image should now be chosen. Turn you camera off and power it back up to see if it worked. Hope this helped.
This is semi difficilt to repair. When you swivel the LCD around there is a cam that actuates a micro switch that flips the image upside down to view the image from the front.There is one small screw that holds it in place but getting to it is a little yime consuming.
The auto rotate sensor is going bad. Look in your camera's menus for a selection to turn autorotate off. Actually going inside the camera and fixing the sensor is possible for those with some electronics background, but really not worth the risk of further damaging your camera. This feature is not necessary as most image processing software has this same feature if needed.
Has this just happened or has it always been like this?
There appears to be a a fault in the main board and only replacement will cure-
So may be if the camera is more than a year or so old- time for a new one.
Meanwhile do speak to the Canon Tech Support on the Web site.
And whilst the matter is still not resolved ,shoot holding the camera upside down- seriously - tell me what happens.
The first thing I would do is a reset. Read your manual about this process, which often requires pressing two buttons at the same time or take your batteries out, wait a minute and put them back. See if resetting helps. Not being familiar with your camera, speciffically, Ithis sounds like the firmware in the camera is reading the info back to you backwards when it processes the image (from memory) for you to view. That means it is the firmware in the camera that is defective and sometimes you can update or reinstall that. I would check the manufacturer's site for updates or recalls and if it is under warranty, send it back to be fixed.