Question about Symbol MC9060

2 Answers

MC9060 RESET Hi I just posted this Quesion but I'll ask youdirectly..... Is there a way to reset the MC9060. I bought one from Ebay that has Targets sofware loaded and it won't let me use it. Thank you!!!

Posted by on

  • Anonymous Dec 10, 2008

    Same EXACT problem

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Expert
  • 96 Answers

Press the power button for at least 30 this will cold boot your device and set to default.. if for some reason the TARGET application or settings still there what you need is use active sync to remove the REGSAVE from application or some kind of Template that Target has installed onto device....

thanks

Posted on Dec 30, 2008

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

Target will not be removed just by getting rid of regmerge you will need to re-flash the unit. To re-flash just download the appropriate hex files and use tcm to download to your mc9060

Posted on Feb 07, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need MC9060 Clean Boot Files, please help!


Hi Gregor Rogowski,
Here is the link to the files for all of the MC9xxx series
http://www.wavelink.com/Zebra-MC9000-All-Downloads/

Aug 14, 2015 | Symbol MC9060

1 Answer

I REPLACED A DEFECTIVE MOTHER BROAD FOR MOTOROLA MC9060-G , BUT WHEN I POWER ON THE MACHINE THE LCD DOES NOT COME ON ONLY WHIT LIGHT THE LCD IS OK THE CPU IS NEW ONE THE ONLY DIFFERENCE IS THE...


well if the part number is different its mostlikely not going to work. We can repair it for you. You can always contact me directly akowalski@legacyglobal.com or 630-622-2024 toll free 866-271-9891 Ask for Andrew

Dec 22, 2009 | Symbol MC9060-G

1 Answer

AP Wireless Network issue with MC9060


TRY TO UPGRADE THE AP FIRMWARE

Nov 09, 2009 | Symbol MC9060-G

1 Answer

How To Reformat my MC9060-G !?


If you have access to your MC9060 handheld SD card (below keyboard), download and unzip 9060LenUP040300.zip from http://support.symbol.com/support/search.do?cmd=displayKC&docType=kc&externalId=11488&sliceId=&dialogID=189014909&stateId=1 0 189012464 to the root directory on SD card, Full charge the battery, and run OSupdate.lnk, 4 - 6 minutes and Voal?!!! fresh and updated WM2003 OS............

Nov 08, 2009 | Symbol MC9060 Barcode Scanner

1 Answer

Hi, how do i perform a hard reset factory default a symbol mc9060-g


The only way is to blank the Application partition. Search on the Symbol Support software download section for the latest operating system and readme files. It will have a section on how to clean the application folder.

If you need any more help then please do not hesitate to contact us:-

http://www.biastechnology.com/

or TEL 01202 620955

Nov 05, 2009 | Symbol MC9060-G

2 Answers

MC9060 RESET


I can help you with this because I just busted my head over this for the last week. I too bought a used scanner and it was loaded with the target software, which automatically starts up, in full screen mode, and "Always on top", the "Running programs" tab is disabled if you do manage to get into the system settings which is very hard so you can't kill the task.

What I did to solve this:
Connected the scanner to a base station and to my PC via usb, with the device on and booted, go to My computer, you should a "Mobile Device" icon, go in there, I found out the program that automatically starts up is located in the Windows folder, called TGTConfig.exe, it won't let you delete or move it because it is always running, but for some odd reason it will let you rename it, I renamed this file to TGTConfig2.exe, rebooted the device, and voila, the device will look for TGTConfig.exe and not find it and will not be able to start it, and therefore you can utilize the device now.

After that I went to the control panel and removed the Target Software. There is still much to be done to this device before it is usable by me, so please, if you figure anything out beyond this point..share back!!!!

Good Luck!
Tim

Oct 17, 2008 | Symbol MC9060

Not finding what you are looking for?
Symbol MC9060 Logo

Related Topics:

4,213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Symbol Barcode Scanners Experts

Brian Friend

Level 2 Expert

132 Answers

ka4iup
ka4iup

Level 3 Expert

3944 Answers

Ngoro
Ngoro

Level 3 Expert

1111 Answers

Are you a Symbol Barcode Scanner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...