Question about RCA Universal Remote Control

9 Answers

I NEED PROGRAM CODES AND PROCEDURES FOR RCR312W

RCA UNIVERSAL REMOTE RCR312W

Posted by on

  • 14 more comments 
  • Tterryl39 Oct 21, 2008

    REMOTE WILL NOT WORK CANNOT PUT TV ON AND OFF NOR CHANGE CHANNELS OR VOLUME

  • ricky1321065 Oct 24, 2008

    CODES AND PROCEDURES TO ADD MAGNAVOX TV ON RCR312W

  • cahaecker Nov 02, 2008

    cannot program remote for my emerson tv

  • propertiesju Nov 21, 2008

    RCA remote doesn't work ,cannot program remote for my emerson tv

  • Anonymous Nov 28, 2008

    CODES AND PROCEDURES TO ADD SONNY TV

  • Anonymous Nov 28, 2008

    remote will not work with orion tv

  • bhs_jess Dec 02, 2008

    I need to know how to program the remote. I have the codes, but I need the buttons to push.

  • jojabi Dec 07, 2008

    I just purchased the RCR312W remote for my JVC AV-32120 TV. When I went to rca/codefinder, the remote was not listed.

    Should've known better than to go to WalMart

  • Anonymous Dec 16, 2008

    NEED TO REPROGRAMED

  • crementer Dec 17, 2008

    i have the rcr312w rca remote control and have lost manual. How do I program this remote for the tv.

  • cphinspectio Dec 23, 2008

    I have a RCA RCR312W remote and can't find programing code.

  • Anonymous Jan 06, 2009

    i need codes for magnavox tb100mw9

  • memnett Jan 08, 2009

    I had the same problem but fixed it with the RCR311W code.

    1) turn on unit

    2) press and hold componet button on remote (TV, VCR, etc)
    until On/Off lights up

    3) press and hold On/Off while holding component button. Light will go out. Continue hoding both buttons until light comes back on.

    4) release both buttons. On/Off should stay on.

    5) Press On/Off repeatedly until unit turns off.

    6) Press the Stop key at bottom.

    7) light goes off. Remote is programmed

  • Anonymous Feb 21, 2009

    remote will not work on my television RCR312W

  • clf_f Feb 21, 2009

    i need program codes and procedures for a rca remote number rcr312w

  • crystalkilgo May 11, 2010

    need code to program remote

×

9 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I can help. I too have an RCR312W remote and it did not work.
I found this code on bobvila.com message board. The code from the RCR311W remote works.


1) turn on unit

2) press and hold componet button on remote (TV, VCR, etc)
until On/Off lights up

3) press and hold On/Off while holding component button. Light will go out. Continue hoding both buttons until light comes back on.

4) release both buttons. On/Off should stay on.

5) Press On/Off repeatedly until unit turns off.

6) Press the Stop key at bottom.

7) light goes off. Remote is programmed!

Posted on Jan 08, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I NEED CODE FOR MY TV MY CODE BOOK WAS LOST?

Posted on Oct 27, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Go to this link and follow instructions. it worked for me.

http://www.wikihow.com/Program-an-RCA-RCR312W-Remote

Posted on Dec 22, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Manual and Codes uploaded here:
http://tv.manualsonline.com/ex/thread/view/idThread/1114027

yvw. . =)

Posted on Dec 04, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hi i need some codes for a brand name clled ELEMENT does any one have them please let me know to program my universal rcr312w

Posted on Jan 19, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Http://www.theusermanualsite.com/ex/thread/view/idThread/1114027
this has the link to the user manual and codes

Posted on Feb 24, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • RCA Expert
  • 158 Answers

User manual or go to their website

Posted on Sep 03, 2015

CODES FOR A PHIPS

Posted on Oct 20, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Bought a new rca 40inc lcd and no remote control will work the tv,not my sat remote or thr rcr312w remote i bought three universal remotes and none work

Posted on Aug 08, 2009

3 Suggested Answers

  • 14 Answers

SOURCE: need universal remote codes for RCA Remote RCR312W

1.Go to the url below
http://www.rcaaccessories.com/rcaaccessories/RcaaccessoriesProductDetail.do?ACTION_TYPE_ID=ACTION_TYPE_PRODUCT_DETAIL&ACTION_CATEGORY_IDSTR_CATEGORY_UNIVERSAL_REMOTES&ACTION_PRODUCT_ID=RCR312W

2. Scroll down and select the "Support and Manuals" tab.

3. Click "Owner/User Manual" link

4. Click "Code List for RCR312W" link

Posted on Feb 13, 2010

freetek
  • 5568 Answers

SOURCE: need codes for rca universal remote rcr312w. for apex tv

With your model number at hand, check the RCA website for a later code list. If you are the exception, you might find one.
Most all remotes have a 'search' function that lets you scan through all of the available code sets but this feature will, in most cases, provide only minimal functionality such as Power, Volume and Channel.
In truth, there isn't any such thing as a 'universal' remote, including the 'learning' remotes; I have one of those and it is unable to 'learn' from either of my later sets' remotes. At best, these should be called (honestly) 'multi-brand.'  

Posted on May 17, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

One for all universal remote i am trying to program my seiki television. I lost the original remote and the power button on the television is broken so I cant turn the television on


Always better to buy a genuine replacement. The problem is that if I remember correctly, Seiki don't actually make the television, which is why it never features in the Remote Code Lists. I have just checked three sites.

http://codesforuniversalremotes.com/3-digit-universal-remote-codes-for-tv/

http://removeandreplace.com/2013/11/10/universal-remote-control-codes-list/


Brand new original SEIKI seiki TV Remote control work for almost all ...

https://www.amazon.ca/original-SEIKI-Remote-control-almost/dp/B00BJ2MC0E
I gave my mother a sieki television for Christmas my two little girls are always using the remote and letting it drop so I needed to find a replacement remote asap.

SEIKI TV Remote Controls ' SEIKI Replacement Remotes for TV, DVD ...

https://www.replacementremotes.com/SEIKI/Remote-Controls/ ReplacementRemotes.com offers SEIKI remote controls for sale online including remote controls for TV and many more.
Google seiki remote control codes

Jan 09, 2017 | One For All Televison & Video

1 Answer

One for all universal remote I need the code to program my seiki tv


here you go


Product Support For One for All Remotes.

Q: I'm trying to set up my cable/satellite/universal remote to work with your television. What is the manufacturer's code for my SEIKI TV?
A: Cable and Satellite content providers control the remote codes, and we apologize for any confusion during the remote programming. Please try the following codes:
DIRECTV - 10178 11687, 10178, 10835, 10056, 10150, 10463, 10156, 11498, 11401, 0178,
Time Warner Cable - 0178
Philips - 0002
Comcast - 11864, 10178, 0060
Cox Communications - 0178
Atlas DVR Device URC - 0178
Bell Remotes & Dish Network - 505, 506, 516, 523, 526, 566, 573, 612, 627, 647, 652, 653, 654, 655, 656, 658, 659, 664, 665, 667, 669, 670, 679, 680, 704, 717, 730, 738
ATT U-verse - 1004
Hitachi - 0002
URC- 2964, 0145
Cablevision customer (optimum)- 004
Bose or universal remotes- LG remote code
Universal Remote - One For All OARC04G 4 Device Universal Remote (Element code)
These codes may not work on some universal remotes. If there is another code listed for SEIKI Digital in your universal remote control guide, please try that code. Refer to the Remote Control Guide under your TV's model number for more information.

Jan 09, 2017 | One For All Televison & Video

1 Answer

What is the code for philips dvd player DVP3570?


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily....
http://electro-medical.blogspot.com/

Jan 08, 2017 | RCA Televison & Video

1 Answer

Where is the setup button on a vibe universal remote there is NO button marked setup


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts.

Jan 08, 2017 | Universal Televison & Video

1 Answer

Hello, The Original remote quit working, So I bought a RCA universal remote control RCR314WZ. I need the code for (DTA800B1 B1L) converter box. so the remote will control it


Some RCA universal remotes list STB codes but you can try using code search to find something that can handle some or all functions. If a search through all codes contained in the remote does not succeed, you may have to try a different universal remote. All universal remotes do not contain all possible codes.

Jan 07, 2017 | RCA Televison & Video

2 Answers

I have a Audiosonic universal remote PH-EL3B and need code to use on Palsonic TV Please


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window " to get gathered related posts.

Apr 29, 2016 | Universal Televison & Video

1 Answer

Where is the set button on a samsung universal remote Bn59-00673


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://electro-medical.blogspot.com/

May 12, 2015 | Samsung Bn59-00673a Remote Control

1 Answer

How do i watch my tv with a broken remote


You can buy a universal remote and program it to work with your TV. I have always had good luck with RCA universal remotes. You can also program the remote to run your cable/sat box and your DVD/blue ray player. You could also go to the web site of the company that made the TV and order a new remote. This would be more expensive but the remote would run all the funcitions while the universal may not.

May 24, 2014 | Televison & Video

3 Answers

Need instructions to add TV button to AKB36157102


1. While pressing and holding down the TV POWER button, press the CHANNEL UP or CHANNEL DOWN repeatedly until your TV is turned on (or turned off if you had it on). 2. Release TV POWER button when the TV turns on or off. The remote's TV POWER button will now control the TV.

Jul 19, 2009 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

13,103 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71126 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Jaime Hernandez

Level 3 Expert

2275 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...