Question about Sony Handycam DCR-TRV19 Mini DV Digital Camcorder

2 Answers

Sony handycam dcr-trv19 mini dv

My computer windows vista is not recognizing my usb cable what should i do

Posted by on

  • 2 more comments 
  • tmc1968 Nov 15, 2008

    Can i get this device to work with windows vista and how. Pleas help!!!

  • Anonymous Dec 14, 2008

    Vista does not recognize my Handycam DCR-TRV19

  • neciastar Dec 20, 2008

    I hope someone can solve this, I'm starting to give up hope...

  • mthon7 Dec 21, 2008

    Same problem

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Because of the fact that Microsoft thinks they're so smart and released Windows Vista as their newest piece of ****, this camera will not work with Vista. The drivers for Windows Vista are non-existent. I went to the site for Sony and could only find XP drivers and 98 and 2000. They do not make them for Vista. And of course Vista should have most common drivers preinstalled, yet they don't have this one. I haven't found a way around it yet. I tried to get the drivers for Windows XP and install them. No good! It cannot be used on "this current operating system." Good luck. Hope somebody else finds an answer.

Posted on Dec 25, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There is a USB driver out there that does work with Vista, I have the same

Posted on Dec 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a panasonic pv-gs19 that is not recognized on my computer. Use to have Windows xp and was recognized when using usb. Now new computer has vista and I was told by panasonic I have to use the 1394 port...


I have a Panasonic PV-GS9 mini DV Camcorder that is not recognized on my computer. I have windows Vista and I have it plugged in via my USB port but it doesn't recognize it and I do not have the disc. Please help me I have to put this recording in AVI format now.

Mar 05, 2010 | Panasonic PV-GS19 Mini DV Digital...

1 Answer

I have a dcr-hc62. Have loaded the software, and am unable to download video to my pc. Software won't recognize the Handycam is the error message. any help? Jrathe@bdail.com


Option 1:

If you want to use the USB cable to connect the Camcorder to the Computer to transfer the video to the Computer then:

(Applicable for Vista Operating System Only.)

This Camcorder does not support USB streaming with the VISTA Operating System. Use an i.LINK cable to transfer the video to the Computer. The i.LINK port is also called IEEE 1394 or Firewire port.(An i.LINK is a black D shaped connector with 4 or 6 pins. The type ofcable to be used will depend on the i.LINK port of your Computer. TheSony Camcorder will have the 4 pin i.LINK cable and if the computer hasthe 6 pin i.LINK port, then you may have to use the 4 pin to 6 pini.LINK Cable).

You can use any video capturing software like Windows Movie Maker to transfer the video from the Camcorder to the Computer.

Refer this Link for the instruction to transfer the video to the Computer using i.LINK cable.

http://www.kb.sony.com/selfservice/documentLink.do?externalId=C111893


NOTE:As the Camcorder does not support USB streaming with Vista, it is notrequired to use any Sony Device Driver to transfer the video to theComputer. You do not require any Drivers or Software from Sony totransfer the video from the Camcorder to the Computer using thei.LINK/Firewire interface.

Option 2:

(Applicable for Windows XP Operating System only):

Ifyou are using a Windows XP Operating System then you have to installthe USB Streaming Driver in the Computer from the supplied Softwaredisk with the Computer.

Check this Link for the instruction to transfer video to a Computer using USB Streaming.

http://www.kb.sony.com/selfservice/documentLink.do?externalId=C222820

NOTE: If you do not have the supplied Software disk then I suggest that you use the i.LINK cable to transfer the video.


Good Luck!!!!!!!!!!!!

Oct 02, 2009 | Sony Handycam DCR-TRV19 Mini DV Digital...

1 Answer

DCR-HC38 computer not recognizing camera


Option 1:

If you want to use the USB cable to connect the Camcarder to the Computer to transfer the video to the Computer then:

(Applicable for Vista Operating System Only.)

This Camcorder does not support USB streaming with the VISTA Operating System. Use an i.LINK cable to transfer the video to the Computer. The i.LINK port is also called IEEE 1394 or Firewire port. (An i.LINK is a black D shaped connector with 4 or 6 pins. The type of cable to be used will depend on the i.LINK port of your Computer. The Sony Camcorder will have the 4 pin i.LINK cable and if the computer has the 6 pin i.LINK port, then you may have to use the 4 pin to 6 pin i.LINK Cable).

You can use any video capturing software like Windows Movie Maker to transfer the video from the Camcorder to the Computer.

Refer this Link for the instruction to transfer the video to the Computer using i.LINK cable.

http://www.kb.sony.com/selfservice/documentLink.do?externalId=C111893


NOTE: As the Camcorder does not support USB streaming with Vista, it is not required to use any Sony Device Driver to transfer the video to the Computer. You do not require any Drivers or Software from Sony to transfer the video from the Camcorder to the Computer using the i.LINK/Firewire interface.

Option 2:

(Applicable for Windows XP Operating System only):

If you are using a Windows XP Operating System then you have to install the USB Streaming Driver in the Computer from the supplied Software disk with the Computer.

Check this Link for the instruction to transfer video to a Computer using USB Streaming.

http://www.kb.sony.com/selfservice/documentLink.do?externalId=C222820

If you do not have the supplied Software disk then I suggest that you use the i.LINK cable to transfer the video.


Good Luck!!!!!!!!!!!!

Sep 28, 2009 | Sony Handycam DCR-HC38E Mini DV Camcorder

1 Answer

Camcorder SONY DCR-TRV25E, COMPATIBILITY window vista


If you want to use the USB cable to connect the Camcorder to the Computer to transfer the video to the Computer then:

(Applicable for Vista Operating System Only.)

This Camcorder does not support USB streaming with the VISTA Operating System.

Use an i.LINK cable to transfer the video to the Computer. The i.LINK port is also called IEEE 1394 or Firewire port. An i.LINK is a black D shaped connector with 4 or 6 pins. The type of cable to be used will depend on the i.LINK port of your Computer. The Sony Camcorder will have the 4 pin i.LINK cable and if the computer has the 6 pin i.LINK port, then you may have to use the 4 pin to 6 pin i.LINK Cable.

You can use any video capturing software like Windows Movie Maker to transfer the video from the Computer using i.LINK cable.

Refer this link for the instruction to transfer the video to the Computer using i.LINK cable.

http://www.kb.sony.com/selfservice/documentLink.do?externalId=C111893

NOTE: As the Camcorder does not support USB streaming with Vista, it is not required to use any Sony Device Driver to transfer the video to the Computer. You do not require any Drivers or Software from Sony to transfer the video from the Camcorder to the Computer using the i.LINK/Firewire interface.

(Applicable for Windows XP Operating System only):

If you are using a Windows XP Operating System then you have to install the USB Streaming Driver in the Computer from the supplied Software disk with the Computer.

Check this link for the instruction to transfer video to a Computer using USB Streaming.

http://www.kb.sony.com/selfservice/documentLink.do?externalId=C222820

If you do not have the supplied Software disk then I suggest that you use the i.LINK cable to transfer the video.

If you are using an i.LINK cable then:

The Camcorder will flash the DV IN message as soon as the i.LINK/Firewire cable is connected to the Camcorder.

If you are getting the DV IN message then it indicates that the Camcorder recognize the connection.

If you are not getting the DV IN message as soon as the i.LINK cable is connected with the Camcorder then the issue may be with either the Camcorder or with the i.LINK cable.

Try resetting the Camcorder or try with different i.LINK cable. Locate the RESET button behind the LCD screen of the Camcorder. (You will be able to locate the RESET button by opening the LCD Screen. The Camcorder should be switched ON when you reset the unit. Press the RESET button using a sharp-pointed object).

NOTE: Resetting the Camcorder will reset the settings of the Camcorder to the factory settings including date and time. It will not delete any data saved in the Camcorder.

If the issue still persists after resetting the Camcorder and with different i.LINK cable then your Camcorder requires service to resolve the issue.

Good Luck!!!!!!!!!!!!!!!

Sep 20, 2009 | Sony Video Cameras

1 Answer

Computer can not capture from video camera


If you want to use the USB cable to connect the Camera to the Computer to transfer the video to the Computer then:

(Applicable for Vista Operating System Only.)

This Camcorder does not support USB streaming with the VISTA Operating System. Use an i.LINK cable to transfer the video to the Computer. The i.LINK port is also called IEEE 1394 or Firewire port. (An i.LINK is a black D shaped connector with 4 or 6 pins. The type of cable to be used will depend on the i.LINK port of your Computer. The Sony Camcorder will have the 4 pin i.LINK cable and if the computer has the 6 pin i.LINK port, then you may have to use the 4 pin to 6 pin i.LINK Cable).

You can use any video capturing software like Windows Movie Maker to transfer the video from the Computer.

Refer this link for the instruction to transfer the video to the Computer using i.LINK cable.

http://www.kb.sony.com/selfservice/documentLink.do?externalId=C111893

NOTE: As the Camcorder does not support USB streaming with Vista, it is not required to use any Sony Device Driver to transfer the video to the Computer. You do not require any Drivers or Software from Sony to transfer the video from the Camcorder to the Computer using the i.LINK/Firewire interface.

Applicable for Windows XP Operating System:

If you are using a Windows XP Operating System then you have to install the USB Streaming Driver in the Computer from the supplied Software disk with the Computer.

Check this link for the instruction to transfer video to a Computer using USB Streaming.

http://www.kb.sony.com/selfservice/documentLink.do?externalId=C222820


If you do not have the supplied Software disk then I suggest that you use the i.LINK cable to transfer the video.


Good Luck!!!!!!!!!!!!!!!

Sep 12, 2009 | Sony DCR-HC21E Mini DV Digital Camcorder

3 Answers

Want to transfer videos from a mini DV cassette to computer.


YOU NEED THE SHARP CD-ROM TO LOAD THE VIDEO DRIVERS ON YOUR COMPUTER TO RECOGNIZE THE CAMERA...PART # IS CDSKAA028WJ01

Dec 24, 2008 | Sharp Viewcam VL-Z1 Mini DV Digital...

1 Answer

Panasonic Digital Video Camera PV-GS83 won't connect to laptop?


You have to have the 7.9V DC cord plugged in at the same time as the usb. the camera should be on when u plug it into the computer

Nov 27, 2008 | Panasonic PV-GS83 Camcorder

1 Answer

NOt recognized


if your trying to download video usb won't work! must use firewire cable hooked up to dv port on cam and connection on laptop or tower called 1394-cable is either 4 pin or 6 pin-depends on computer- cam is always 4 pin-says dv on camcorder-usb only for still pics-use windows movie maker in xp or vista to edit

Jun 28, 2008 | Canon MV700 Mini DV Digital Camcorder

1 Answer

Vista and firewire 1394?


Firewire works fine under Vista, but it's quite possible your USB to Firewire bridge doesn't have proper Vista drivers. You wouldn't expect Vista to include these, they would be installed from a disc that came with your adaptor. USB to Firewire is a questionable option at best... there are often problems with it. You may be better off with a PC-Card or ExpressCard solution, if the laptop is your only computer.

Also, when the camera says "DV IN", it's expecting video from the PC to be sent to it, it's not in capture mode. Most camcorders must be in either "play" mode, or a special "link to PC" mode in order to even be recognized by Windows (any version) as a video input device.

However, until you resolve the issue of supporting your Firewire device in Vista, nothing the camcorder does will be an issue yet. You should check the documentation that came with your USB to Firewire device, the driver disc, etc. for information on Vista support.

Jan 05, 2008 | Canon ZR200 Mini DV Digital Camcorder

Not finding what you are looking for?
Sony Handycam DCR-TRV19 Mini DV Digital Camcorder Logo

Related Topics:

470 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Video Cameras Experts

Larry Stiles
Larry Stiles

Level 2 Expert

286 Answers

kakima

Level 3 Expert

101554 Answers

Sheryl Bahr
Sheryl Bahr

Level 2 Expert

65 Answers

Are you a Sony Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...