Zenith z52z95d8 No picture at all but have sound. any help would be great

test the volume switch for open or faulty or desolder wires 2) the board or sound can be faulty need repair. 3) speaker test for coil open or desolder wires

God bless you

you likely connected it with one or both units involved on and HDMI does not like that--prone to all sorts of audio issues.

If in doubt unplug the units and wait and plug back up making the connections first.

ciforrer,

This is also where I would recommend starting to look. I have a tip at http://www.fixya.com/support/r6396176-projection_tv_troubleshooting which should help you localize and repair the problem.

Thanks for using FixYa and for the great rating.

hardrocko

I do not have a Zenith B25A02Z TV. What I do have is a 1988 Zenith Color TV SE2517P. I called a local tv repairman and discussed the problem over the phone. He can take a look at it if we bring it in (service call to the home cost $100 just to show up). He said it was worth fixing since he thought it was only the sound. We have a great picture. He charges $20 to look at it but we have to leave it. He lives 20 minutes away one way. We think it is worth the trip if we can get it loaded into our minivan. We live in western NY where the weather can get pretty ugly many days. I will post the solution later when I know. FYI

press mute button on tv remote

This is a poor manufacturing defect. Visit this forum for more information on the issue.

Youre audio output IC is probaly defective. Try replacing the IC its only a few dollars and thats usually the problem with that chassis when audio drops out completely.

TV wirked fine for years, but when we moved it to a new house 100 miles away the sound was gone even the cable supplied picture is great. Cable company couldn't recover the sound either.

check high voltage transformer

very simple 1 check spekar &its connection for loose contact 2 sound section supply. 3 parts near ic might be defective near sound section.