- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
That means unstable fusing temperature. It can be reset by entering service modes, but if the problem persists it may come back. To enter service modes you follow this sequence of key stroke: clearmodes, "1" , "0", "7", then hold down clearstop for three seconds. Once you're there to reset this code you must enter SP 5-810 (SC code reset) and select "1". Then simultaneously press the Original Type key and the OK (or enter) key. (There is no need to turn the main switch off and on.).
That would usually be your telephone service provider not the fax machine, if it is a business line, the permissions may have been changed. Check with your business communication administrator, or your local phone service provider.
The technical manual is stating that the problem is with the left lock lever make sure that the door is shut correctly power down then back on again. If the problem comes back I think it maybe the laser unit then and it will need replacing.