Question about Sanyo DS32830H 32" TV

1 Answer

Picture is all black and white

I think my young son stood on the remote control and ever since I can only get black and white. This doesn't happen when I play a DVD, this appears on the TV in full colour. I have Freeview. I've tried the usual "unplugging" etc but no luck

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers
Re: Picture is all black and white

This could be a tuner problem or maybe if you have cable the little tyke somehow got into the menu of the tv and switched they type of cable signal you have in your area. Try to go into the menu ,find the auto tunning feature and go through that again. If that dosent work test the cable line your using with another set at the same location. If that tells you the cables good by geting color on another set its time to call in a service person as I decsribed all the things i would hve tryed . Try the # and link im leaving here for you. good Luck. (800) 421-5013 or

Posted on Jun 02, 2006

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My son pressed a button on the loewe anaconda remote and now we cannot get any sound or picture, just a black and white blurry picture. SOMEBODY HELP!! PLEASE.

Please enter in factory menu by input the service menu code, find the correct service menu code for your television in
I hope you can fix your problem.

Nov 17, 2013 | Standard (CRT) Televisions

1 Answer

Color adjust without original remote cs-35303

Almost any Mitsubishi remote will work for standard adjustments--just that simple.

If issue is too much red, green or blue(not a good black and white picture) the controls for those adjustments are located inside the set on the board that plugs onto the end of the picture tube.

Let me know what your issue is and I will advise further.

Mar 20, 2012 | Standard (CRT) Televisions

1 Answer

AKAI Colour Television CT-1419A/AT plus AKAI remote RC-V9A. Television was fine, then went to just a narrow, bright horizontal band across the screen but sound is fine. Suspect my son played with the...

Its not problem with any setting. Its an internal fault. Vertical scanning output stage has failed in your tv. You have to check the soldering of the vrtical output ic if there is any dry soldering this can happen. try to resoder all the points in the vrtical output stage. IF doesn't help then you have to change the vertical output ic. Have added the picture of the dry soldering point how it looks like. If you need further assistance feel free to contact throug FixYa.


Aug 20, 2011 | Akai Standard (CRT) Televisions

1 Answer

38 '' RCA TV XBOX Model 36V550T, lost the picture

Does it only happen when you use your Xbox?

Try pulling the cable in and out between the TV and Xbox

Dec 05, 2009 | RCA 36V430T 36" TV

1 Answer

RCA TV lost Color

It sounds like your grandson found the "monochrome" setting in the menu on your remote. It may be in the "picture settings", "set-up" or "advanced" setting.

Sep 10, 2009 | RCA 32F531T 32" TV

1 Answer

Young son locked tv parental control

Under the main menu, go to the Parent tab and enter the Master Password: 4357. This will completely clear the present password. You can enter a new one afterward.

Mar 12, 2009 | Sony FD Trinitron WEGA KV-34HS420 34" TV

1 Answer

Zenith Model SY2551S 1996 27" - Green Tint

The core problem with the green tint is the aging of the picture tube, and can be compensated a bit by using either the green drive control usually located on a printed circuit board on the neck of the picture tube or on the main chassis. There will be 3 main controls which will adjust the red and blue as well. If these controls are not present then you will need to get into the service menu and adjust it from there. Don't adjust anything else as you can make the set much worse. Also remember that in order to make these internal adjustments while watching a black and white picture (turn the color all the way down) you will have your hands and arms near live circuits that could shock you and cause injury to yourself as well as break parts inside the set when you pull back after being zapped (voice of experience here) Of course if you can do all this by the service menu then you won't even have to remove the back of the TV.

Sep 08, 2008 | Zenith C27A24T 27" TV

1 Answer

Green tint I can't seem to fix

Hopefully someone on here has a manual and can tell you exactly where the tint controls are. Also need to try adjusting the color level, turn it clear down so you have a black and white picture.
Is the picture still green over the screen with the color control
set clear down to black and white? If it does, you might
have an issue with the green gun going out or problem in the
circuitry to it.

By the way, the best way to adjust the picture settings on a
tv are to first turn the color control clear down, then adjust
brightness and contrast for best black and white picture, then
bring up the color level to where it should be and adjust the
tint for best red/green ratio.

May 20, 2008 | Mitsubishi CS-27205 TV

1 Answer

Rca tv 25 inch floor model

hi there, you maybe in palsecam mode, do some experiment on your remote control. you need to at ntc mode. ty

Feb 13, 2008 | Standard (CRT) Televisions

Not finding what you are looking for?
Sanyo DS32830H 32" TV Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66413 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Sanyo Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides