Question about HP Officejet 5610 All-In-One InkJet Printer

1 Answer

No hp devices have been detected. hp solution center will close now

When i try to open the hp solution center the message i get is (no hp devices have been deteced. hp solution center will close now. the printer will print off of the computer from other programs when i set it up the computer detected printer, I just cant open the solution center. Can you give me solution to this problem.
my e-mail is nm_p_60@hotmail.com

Posted by on

  • Larry Degelman Apr 08, 2009

    The "No HP devices have been detected. HP solution center will close now" problem seems to have run rampant on all the HP "All-in-One" devices. Mine is an Officejet Pro L7580 and I'm running Vista Ultimate 64-bit on an HP 9500 series laptop. My access to my printer is wireless. Printing works fine, but no-go when it comes to any attempts to scan anything. This scanner works fine in wireless mode with other computers in my house using Windows XP and even one using Vista Home 32-bit. I suspect this is a Microsoft Windows issue and not actually an issue with HP. I've revoved and reinstalled my "All-in-One" software at least 10 times over the past three months, but there is no impact on the problem. It's still there. Someone out there, HELP!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 32 Answers

Hi petenam,

since you posted this 10/17/08, it's probably no longer an issue for you... but jsut in case someone else is runs acorss the same issue and comes by your post, here are a couple links for future refs (from HP's support site) that might be helpful.

hp solution center and product defaults:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00787813&dlc=en&product=441125

no HP devices detected via solution center:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00762521&dlc=en&product=441125

no devices messages running Vista:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01529081&cc=us&lc=en&dlc=en&product=441125

general support issues link for your product:
http://h10025.www1.hp.com/ewfrf/wc/product?product=441125&lc=en&cc=us&dlc=en&lang=en&cc=us

-JW50

Posted on Nov 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No HP devices detected. HP Solutions Center will close now. I have installed and uninstalled still saying No HP devices detected. HP Solutions Center will close now.


Did you follow the prompts to turn on device and connect the USB cable at the correct time in the installation process? Check your USB connections and cable.

Jan 13, 2011 | Computers & Internet

1 Answer

Can not scan


the scanner driver is not installed on your computer you have to install the driver for your scanner with the cd that was given to you while purchasing the scanner

May 28, 2009 | Computers & Internet

2 Answers

No HP devices detected. HP Solutions Center will close now.


It might help to uninstall the HP devices through the Device Manager, and then restart the computer. Let the computer try to detect the HP devices and install them and the drivers needed. You might want to have any software discs handy in case you have to reinstall any software that came with the printer, etc.

Feb 12, 2009 | HP Computers & Internet

1 Answer

HP Solution Center No HP Devices Detected


Try this

1.Right click on MY computer ->Properties->Hardware->Device manager.

2.You will get Device manager window popping out.

3.Scroll down to "Universal Serial BUS controllers".Click on the (+) sign.

4.Check for the "USB Composite Device" and right click on it, click Uninstall.(IMPORTANT NOTE:wE HAVE TO UNINSTALL THE PRINTER'S USB COMPOSITE DEVICE, TO KNOW WHETHER IS THE PRINTER'S USB COMPOSITE DEVICE, RIGHT CLICK ON USB COMPOSITE DEVICE AND PROPERTIES,look for wat location says, Eg -LOCATION : HP DESKJET F2100

5.Disconnect the USB and reboot the PC.

6.Connect the USB after reboot, you will get popup "Found new hardware".Then the Drivers will be installed Automatically.

Thanks
Riz

Jan 03, 2009 | HP Photosmart C8180 All-in-One InkJet...

1 Answer

No HP devices detected. HP Solutions Center will close now.


when it hangs,right click the task bar and open task manager and from the process tab stop the file wrapper.
In device manager click on view and select show hidden devices.
U will see and imaging device keep updating it and

Oct 22, 2008 | Office Equipment & Supplies

1 Answer

No HP devices detected. HP Solutions Center will close now.



HP PSC, Officejet, and Photosmart All-in-Ones - The Error Message 'No HP Devices Detected' Occurs When Opening HP Solution Center (c00762521) Issue gtabtop.gif When opening HP Solution Center, a message appears that states "No HP Devices Detected ".
Solutiongtabtop.gif
    Solution one: Check connections and status

    1. Check to make sure that the device cables are connected securely at each end.
    2. Make sure the device is turned on and not in an error state. If unsure, turn the unit off and then back on again.
    3. Try to access the device through Solution Center again.
    4. If the device is still not detected, proceed to Solution two.

    Solution two: Check that there is a printer icon in the printer folder

    1. Click Start and then Settings or Control Panel .
    2. Click Printers or Printers and Faxes .
    3. Make sure there is an icon for the printer you are trying to use.
      • If there is no icon and you are connecting via a USB cable, disconnect the cable, and restart the computer. Reinsert the HP software CD and choose Add a device . Connect the unit when prompted by the installer.
      • If there is no icon and it is a wireless connection, run the wireless setup wizard as outlined in the product setup guide, then reinsert the CD and choose Add a device .
      • If there is no icon and it is an Ethernet connection, reinsert the CD and choose Add a device .

    Solution three: Check that the Digital Imaging Monitor is running


      NOTE: If you chose a custom install and did not select HP Digital Imaging Device Functions, the Digital Imaging Monitor will not be installed. Proceed to Solution five.

    1. Press the CTRL , ALT , and Delete keys at the same time to open the Task Manager.
    2. Look to see if HPQTRA08 and HPQSTE08 are running.
    3. If they are not running, restart the computer and then try again.
    4. If they are still not showing in the list, proceed to Solution four.

    Solution four: Check that the HPZPML driver is running

    1. In Windows XP and 2000, click Start , Control Panel , Administrative Services , and then click the Services Icon . Scroll through the list looking for HPZPML to make sure it is set to automatic and that it is running.
    2. In Windows 98/ME, open the Task Manager by pressing CTRL , ALT , and then Delete . The file HPZIPM should be listed.
    3. If the HPZML or HPZIM file are not available, restart the computer. If they still do not show up, proceed to Solution five.

    Solution five: Uninstall and reinstall the software

    1. Insert the software CD into the CD-ROM drive of the computer. The software installer should automatically start.
    2. If the software installer does not automatically start, complete the following steps:
      1. Click Start and then Run .
      2. On the Open line, type D:\SETUP , where D is the letter of the CD-ROM drive.
      3. Click OK .
    3. Click Uninstall on the installer screen. If Uninstall is not an option, the software installation was incomplete. Click Install .
    4. Follow the onscreen instructions until the printer software is completely installed.

Causegtabtop.gif There are several reasons this can happen. The device was not connected during the installation of the software, there is no printer icon in the printer folder, the Digital Imaging Monitor is not running, or the HP service PML driver is not running.

Aug 18, 2008 | HP Photosmart 3210 All-In-One InkJet...

1 Answer

No HP devices detected. HP Solutions Center will close now.


Unistall the software you have for it now. Go to HP.com and look for Vista drivers for your printer.

May 21, 2008 | HP Photosmart 2710 All-In-One InkJet...

Not finding what you are looking for?
HP Officejet 5610 All-In-One InkJet Printer Logo

Related Topics:

4,772 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

100387 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...