Question about Canon imageCLASS MF5550 All-In-One Laser Printer

1 Answer

Service mode I need to into service mode somebody can help me?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

To get in to service press MENU, then COPY and then # sign. I do not know how to change SSSW.

Posted on Nov 30, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Model W240. How can I enter service mode?

enter service mode Mohammad, Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Entering Service Mode HP LaserJets
canonipf Service Mode
Service Manual free download schematics datasheets eeprom bins pcb repair...
Ricoh 6000 service mode

Apr 11, 2016 | Ricoh Printers & Copiers

1 Answer

I need help to be sent tha service manual @t it's very agent!!!!!!!!!!!!!!! Somebody help!

i can give you service manual but you have to pay cost for that.
you can email me for furthure details on

Apr 06, 2011 | Canon iRC3100 Printer

1 Answer

Can somebody help me? I need a service manual for my EIKI LC-XB23. Thanks.

Here it is (click here), it's a pdf file, you'll need a pdf reader like adobe reader to open the fine on your computer.

click here to download adobe reader

If you need further help, let me know.

Good luck.

Thanks for using FixYa.

Oct 10, 2010 | Printers & Copiers

1 Answer

Hi there can somebody send me the service manual

You have to download the ir1018 Service Manual. from a download center.

There is a charge but it's not much though. Service manuals for Canon machines are never free - sorry. Good Luck.

Jun 18, 2010 | Canon IR1018J Black and White Copier

1 Answer

How to solve y axixes cut problem

How do you know that is the problem? Somebody must of changed a setting in service mode. If I were you I would make sure that the paper trays are set correctly and alined correctly. Also, you did not say if it is off the glass or the adf ?

Jun 01, 2010 | Canon imageRUNNER 400S Copier

1 Answer

Display is showing code SC 542.

the error is for a heating eror in the fuser either toner build up on the thermistor or the thermofuse has blown if you have the machine turned on press the yellow clear button and then input 107 and then hold dowwn the stop button.. turn machine off and wait a few seconds then turn back on.. this should clear it if it was just a fluctuaction in temps.. if that doesnt work take fuser out and check the condition of the temp sensors and do reset again.. if the code stays on you will have to go into the service mode.. acccessed the same way as reset but you need to enter the copier sp and then go to 5.Mode and look for 810 this is the sc reset execute turn off and then on >>>>Hope this helps A

Jul 30, 2009 | Ricoh Aficio 1035 Copier

1 Answer

Rico afficio 450

Dev. initialize should only be done when replacing dev.otherwise it will not add the correct amount of toner to the dev.Replace developer and run sim.2-801 in service mode.

Jul 19, 2008 | Ricoh Aficio 450 Copier

6 Answers


follw these steps, it should work
turn off copier.
open top toner cover.
turn copier back on.
when you see message "close top cover" press "system menu" button.
scroll up to "service setting" then press the # button, green "start" button and the "enter" button all at the same time.
then scroll down to "maint mode"
press "enter"
then enter 163
press" enter "
turn off copier then turn back on
close toner cover

you should be back in business

May 17, 2008 | Kyocera Copystar CS-1820 Black and White...

1 Answer

Error Code

The error code is saying you have a fuser fault
Try resetting the machine

get into service mode

then CLEAR
then ERROR
then OK at the bottom right hand corner
if you dont know how to get into service mode
call me 00447764303923.

Feb 15, 2008 | Canon imageRUNNER C3200 Copier

1 Answer

The PCU Reset procedure needed

switch the machine off at the switch hold down online and escape while switching on the switch , hold the buttons till you see service mode on screen , you need to go to engine , then drum , there you will find the setting to reset the pcu , or under data log is a function pm counter clear if it is giving you replace pcu on the screen

Nov 01, 2007 | Ricoh Aficio AP3800C Laser Printer

Not finding what you are looking for?
Canon imageCLASS MF5550 All-In-One Laser Printer Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts


Level 3 Expert

96683 Answers

old marine
old marine

Level 3 Expert

1479 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides