Question about Ovens

2 Answers

Oven heating element

We have an OLD (1950-60) Frigidaire wall oven, model # RBG-94. Bottom heating element has gone out. Oven is still in good shape so we'd like to be able to find an element replacement, but have had no luck finding one.

Posted by on

  • rvready Oct 17, 2008

    Thanks for trying to find the part. I think you're right about buying a new one.

  • Anonymous Jan 24, 2009

    I have the identical oven but I believe it's the temp sensor; p/n: 5309957110 that is out - but, I can't find the part and I don't want to admit that my wife is right and I should buy a new oven. It's a real spot I'm in.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 750 Answers

Hello rvready
Welcome,


You said, We have an OLD (1950-60) Frigidaire wall oven, model # RBG-94. Bottom heating element has gone out. Oven is still in good shape so we'd like to be able to find an element replacement, but have had no luck finding one.

unfortunately,
I am not able to find this part either.
Anywhere. This oven is to old for parts. But most important is that it is causing you high utility rates!
Today's appliances save you the arm and the leg that such an old oven is costing you.
You have no idea how it is sucking your money out of your pocket!
It is unfortunate, that no one told you about this years ago!
You payed for more than one oven with your utility bill if you had it since it was new. My advice is do not put good money into bad!
Shop for a new one and see your bills go down.
my wife was telling me to replace the air and furnace for 7 years and I said, it's not broken. But it was over 20 years old. She was right, cause the new one saved me $100. a month!
That means I threw away $7000. in 6 years with my old world attitude.
Yes I am old fashion and always fix it!
But after 25 years of marriage. i finally realized she is a good evaluator and I was a fool to not appreciate her gift for all these years! And out tons more money than I told you about!

Hope I saved you some bucks with my real life stories!
Don't tell your wife!!!
Huuum



Posted on Oct 17, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The lower oven bake element for models RBG-94 and RBG-94K IS still available and can be found at the following link:

http://www.appliance411.com/data.php?ap=AP2591772

JFYI

Dan O.

Posted on Nov 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Early 1960's Frigidaire 24" Double wall oven not heating


Hello Chris Hammond, thanks for your post!

Based off the information you have provided it sounds like a potential problem with your connector for your element within your Frigidaire wall oven. I would recommend reaching out to a professional technician for proper diagnosis repair to help avoid any unnecessary part purchases. Best of luck! -Matt

Nov 07, 2014 | Ovens

1 Answer

Frigidaire double convection wall ovens, model GLEB30T9DSA ... The top oven will not heat, both the bottom element and the broiler.....


I have the Frigidaire PLEB30S8CCA single wall oven. About 3 months ago the baking element appeared to have gone out. We replaced it, but still didn't work. We ended up sending our control board off to a company named Corecentric. They fixed the problem and returned it to us. The oven has worked perfectly ever since. I searched extensively for a new one, but no one sold them anymore. I found Corecentric on Ebay. They were able to confirm over the phone that it was more than likely a control board issue. It cost about $130. My husband was able to do it himself by taking a couple before px and using them when reassembling it.

Apr 04, 2014 | Frigidaire 30 in. Electric Gallery Series...

1 Answer

I have a Frigidaire Electrolux Model FEB30S5ABB. The oven will not heat up to the correct temperature and the bottom element is not turning on. We checked the element at it checks out ok. What could be...


Hello lizzyd62 - Sounds like the mechanical thermostat, oven sensor or EOC needs to be diagnosed for replacement. I would suggest contacting a professional to move forward accurately.

Nov 23, 2012 | Frigidaire 30 in. Electric Single...

1 Answer

Wall oven bottom element not heating has been tested and is good, oven makes a clicking noise on and off


Clicking noise usually a relay in the control board for the heating.I would check there.

Feb 02, 2011 | Frigidaire Ovens

1 Answer

Frigidaire wall over model number CGEB30S8AB1 is not heating. It is just the bottom bake element. I tried to replace the element but it is still not working. I can hear the relay clicking but it will...


I had this problem a year ago (both elements worked in top oven but only broil element worked in the lower of the dual ovens). I swapped elements around but the problem was still the bottom element bottom oven.

So I called the repairman. He replaced the relay board (Part #AP2127301) for the lower oven, and it worked again. Yippee.

But now a year later, I have the exact same problem. Lower element on lower oven is not working (Frigidaire you have got to be kidding)!

However this time I decided to take a look at the relay board myself, to at least save the expense of the repairman. I looked closely at the board and thought I saw a cold solder joint on relay K4. But just to be safe I touched up all the connections on all the relays with flux and a soldering iron.

Works perfectly again !!

Please if you try this, disconnect the power first. In fact if I had to tell you that, then just call somebody.

Oct 11, 2010 | Frigidaire 30 in. Electric Gallery Series...

3 Answers

Frigidale 10 years old stove bottom heating


Have 10 year old fridgidare elec.oven. Model no.FEF355ASE and both bake and broiler have stopped working have power and ohm's are good. Whats next ?

Jun 23, 2010 | Frigidaire 30" Self-Cleaning Freestanding...

1 Answer

I can't find an owners manual for my very old Frigidaire RE-94 wall oven. the oven powers on, but the heating element does not get hot-- so trying to assess if a new heating element would do the trick or...


I have the same oven. works perfectly since 1976. I have the owner's guide and the schematic which will direct you to the solution. you will need to pull the oven 1/3 out of the wall in order to access the electric controls and use a VOM to check voltages.

Let me know what you need.

Curt

Oct 14, 2009 | Frigidaire Ovens

1 Answer

My frigidaire oven won't heat. The burners work


You have two elements turn on the broil and see if the top element comes on if it does replace the bottom element.

Aug 23, 2009 | Frigidaire Ovens

3 Answers

Frigidaire GM deluxe electri dean (electric oven wall unit)


if you feel through the insulation you can find the two wires that attach to the element pull them through to plug the element back on but there is no plug per say but first are you sure the element is good were there no wires on the element when you removed it should have been two spade connectors with wires on them attached to the element hold my rating till you reply

Jan 11, 2008 | Frigidaire FEB27S5A Electric Single Oven

Not finding what you are looking for?
Ovens Logo

Related Topics:

758 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ovens Experts

William Miller
William Miller

Level 3 Expert

8820 Answers

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you an Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...