Question about HP PAVILION A6230N DESKTOP PC

3 Answers

Internet connectivity I have a HP desktop with Windows XP. My computer shows that I have a connection to the net and my provider confirms that. I get a warning message that states my TCP/IP transport device in not installed. My provider feels that either the card or software got corrupted. Any way of fixing this? irealize my system is an old one, but I 'm not quite ready to throw it out. My provider is RCN.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 63 Answers

This application has failed to start because SPORDER.dll was not found.
Third-party networking products may not function correctly.Computers may not be able to connect to the network because they cannot obtain an IP address.You may receive the following error message when you are using Microsoft Internet Explorer:

Posted on Apr 28, 2009

Poka

Posted on Oct 22, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 505 Answers

TCP/IP network transport not installed

Symptoms: After you run Microsoft Windows AntiSpyware (Beta) or other anti-virus/spyware/adware software, 1) you may receive one or more of the following interactive error messages:

Could not start the Windows Firewall/Internet Connection Sharing (ICS) service on Local Computer. Error 10047: An address incompatible with the requested protocol was used.

or

Windows Firewall settings cannot be displayed because the associated service is not running. Do you want to start the Windows Firewall/Internet Connection Sharing (ICS) service?

or

This application has failed to start because SPORDER.dll was not found.

2) Third-party networking products may not function correctly.

3) Computers may not be able to connect to the network because they cannot obtain an IP address.

4) You may receive the following error message when you are using Microsoft Internet Explorer:

Error 404: Page cannot be displayed.

Cause:

There are known spyware programs that install layered service providers (LSPs) on client computers to gather user data. When Windows AntiSpyware (Beta) removes spyware programs, it also removes the spyware-based LSPs. However, Windows AntiSpyware (Beta) does not restore any LSPs after it removes the spyware.

Resolutions:

How to rebuild the Winsock LSP chain on Windows XP SP2

How to rebuild the Winsock LSP chain on Windows XP, XP SP1, and Windows 2000 __________________
Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net

Posted on Oct 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't use either Microsoft Live Mail or Lookout Express v6 with Belkin Router. Can't send or receive email Can you tell me what the email setup is for either one? Both email programs probably use the same...


Ask COMCAST for the names of their POP-server and of their MAIL-server, and configure Outlook Express to use those names.

Microsoft Live Mail is "web-based" -- all you need to do is to web-surf to their web-site, login, and click "send/receive" or click "compose" and later "send".

Sep 03, 2010 | Computers & Internet

Tip

How to Connect a Windows 7 Computer to a Windows XP


Even though Windows XP and 7 are different versions of Windows, you can still connect a computer running Windows 7 to an XP computer using Remote Desktop Connection. Remote Desktop Connection is a utility in Windows that allows you to log in to a remote computer directly from your computer's desktop. However, before you can use the utility on your Windows 7 computer, you must enable it on the Windows XP computer. To connect to the Windows XP computer, you also need to know the XP computer's name.

Instructions

Enable Remote Desktop on the Windows XP Computer
  1. Click "Start" on the Windows XP computer, and then right-click "My Computer."
  2. Click "Properties" from the pop-up menu.
  3. Click the "Remote" tab, and then click the "Allow Users to Connect Remotely to This Computer" check box.
  4. Click "OK" to confirm the change when prompted on the pop-up window. Click "OK" on the open windows to close them.

Connect to the Windows XP Computer
  1. Click "Start" on the Windows 7 computer, and then type "Remote Desktop Connection" in the search box. Press "Enter."
  2. Click "Remote Desktop Connection" from the results list.
  3. Type the name of the XP computer in the "Computer" box, and then click "Connect" to connect to the XP computer.


References
  • ( Microsoft Support ) How to Use the Remote Desktop Feature of Windows XP Professional
  • !!!!CLICK HERE!!!!!
  • ( Microsoft Windows ) Connect to Another Computer Using Remote Desktop Connection
  • !!!!CLICK HERE!!!!!
  • ( Microsoft Windows ) Remote Desktop Connection: Frequently Asked Questions
  • !!!!CLICK HERE!!!!!

*please leave a rating if this information is helpful and beneficial to you.


Regards
MultilinkEnt.

on Jun 05, 2011 | Computers & Internet

1 Answer

XP, IE doesn't recognize internet connection


Hello,

Make sure you have also installed service pack 3. This should get you back online with IE.

Good Luck
C2S

Jul 11, 2010 | HP Pavillion a818n Desktop PC (Refurb)...

1 Answer

Troubleshooting wireless home network using windows xp


To Configure a Wireless Connection in Windows XP, Follow the Instructions Outlined Below.
  1. Click the Start button, click Network Connections, and choose Show all Connctions.
    wnc_xp_1.jpg
  2. Click the Wireless Network Connection icon with your right mouse button, then choose View Available Wireless Networks.
    wnc_xp_2.jpg
  3. Choose the name of the 2Wire access point from the Available networks list.
  4. In the Network key field, type the hexadecimal key to access the wireless network.
    Note: The hexadecimal key and wireless network name should already be set up on the 2Wire device. Use the key that you set up on the 2Wire device.
  5. In the Confirm network key field, type the hexadecimal key to access the wireless network again for confirmation.
  6. Click the Connect button.
wnc_xp_3.jpg

Apr 15, 2010 | HP Pavilion m7680n PC Desktop

1 Answer

HP pavilion network adapter not found


You need to download the drivers from the Compaq/HP WEB support/download page. Make sure you select your model computer and the XP Windows version of the drivers you require and install them. Use this link to download the drivers :-
http://h18000.www1.hp.com/cpq-country/cpq_support.html

Aug 03, 2009 | HP Computers & Internet

1 Answer

NIC Connection question, Manual in XP, Automatic in Linux


Its depend on your LAN Card Configuration, something it obtain or directly detect your internet connection but sometimes its not. That is why to make sure that you can connect you manually put IP Address on it. Uncheck the limited or no connectivity on the Lan Setting to make that when you are using Obtain IP Address then it shows and detect your Router or Hub with internet provider.

Jul 29, 2009 | HP PAVILION DV4000 AND V4000 SERIES...

1 Answer

How to disable firewall connections on an HP


Disable Windows Firewall in Windows XP SP2 or SP3 loadTOCNode(2, 'summary'); NoteBy turning off the firewall, you leave your computer open to attack.Therefore, before you turn off your firewall, disconnect your computerfrom all networks. This includes the Internet.

To disable Windows Firewall, follow these steps:
  1. Click Start.
  2. Click Run.
  3. Type Firewall.cpl, and then click OK.
  4. On the General tab, click Off (not recommended).
  5. Click OK.

FOR WIN_VISTA



.



1. Open Windows Firewall by clicking the Start button , clicking Control Panel, clicking Security, and then clicking Windows Firewall.
2. Click Turn Windows Firewall on or off. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
3. Click Off (not recommended), and then click OK.


rate me if it helps..

regards,

Dec 04, 2008 | HP Pavilion a705w PC Desktop

1 Answer

I have a Compaq PC with Windows XP and the flat I've moved into has wireless broadband - how do I connect to it?


You can use a wireless network to share Internet access, files, printers, and more. Or you can use it to surf the Web while you're sitting on your couch or in your yard. Plus, it's easier to install than you think.
There are 4 steps to creating a wireless network:
1.
Choose your wireless equipment
2.
Connect your wireless router
3.
Configure your wireless router
4.
Connect your computers
For Windows XP users, Windows XP Service Pack 2 is not required for wireless networking, but it does make things much easier. Service Pack 2 also helps protect you against hackers, worms, and other Internet intruders.

Connect your computers
If your computer does not have wireless network support built in, plug your network adapter into your USB port, and place the antenna on top of your computer (in the case of a desktop computer), or insert the network adapter into an empty PC card slot (in the case of a laptop). Windows XP will automatically detect the new adapter, and may prompt you to insert the CD that came with your adapter. The on-screen instructions will guide you through the configuration process.
Note: The steps below only apply if you're using Windows XP Service Pack 2. If you're running Windows XP and you don't have Service Pack 2 yet, plug your computer into your wireless router and download and install Windows XP Service Pack 2.
Windows XP should show an icon with a notification that says it has found a wireless network.
wireless_connected.gifFollow these steps to connect your computer to your wireless network:
1.
Right-click the wireless network icon in the lower-right corner of your screen, and then click View Available Wireless Networks. If you run into any problems, consult the documentation that came with your network adapter. Don't be afraid to call their tech support.
2.
The Wireless Network Connection window should appear and you should see your wireless network listed with the network name you chose. If you don't see your network, click Refresh network list in the upper-left corner. Click your network, and then click Connect in the lower-right corner.
wireless_chooseconnection.gif 3.
Windows XP prompts you to enter a key. Type the encryption key that you wrote down earlier in both the Network key and Confirm network key boxes, and then click Connect.
4.
Windows XP will show its progress as it connects to your network. After you're connected, you can now close the Wireless Network Connection window. You're done.
Note: If the Wireless Network Connection window continues to show Acquiring Network Address, you may have mistyped the encryption key.

Nov 05, 2008 | Compaq Computers & Internet

1 Answer

I have been using Netgear for approximately 6 months. Two weeks ago, all Internet Service was stopped for both my HP Windows Vista desktop and Acer Aspire 9300 Windows XP laptop. Think either Net Gear or...


Try to use your laptop in the other wifi connection if it's work the problem is your router wifi configuration. But if cannot work try to check in device manager if your wifi device is working properly. in the RUN type DEVMGMT.MSC and look for your wifi device there if there is a ? mark it's mean that there is a complex configuration in the wifi. remove the wifi device in restart your computer the windows automatic detect the device in install it. try to connect if it is work but if still not work check for the ip and gateway configuration in the wifi setup.

Apr 25, 2008 | Computers & Internet

Not finding what you are looking for?
HP PAVILION A6230N DESKTOP PC Logo

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18384 Answers

Tony

Level 3 Expert

2600 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...