Question about Kenmore 24902 Top Load Washer

1 Answer

Kenmore ultra fabric care 80 seris washer

My Washer will not go through the spin cycle. I can hear it draining but the tub does not spin.help please!

Posted by on

  • michael_boyt Jan 05, 2009


    I can also hear the water draining, but the machine
    won't spin.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Did you try checking your belt to see if its real lose?That might be it!.I have a question for you about this washer,do you know where the lint catcher is?.

Posted on Jan 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore 80 series washer model 110 doesn't fully drain when cycle complete


With the lid open, try to turn tub by hand. If you can you may have a bad clutch. If you hear the washer agitating at the begining of the cycle without any water and filling at the end of the cycle, replace the ATC switch. Try spin cycle and open the lid, if you don't see the tub turning, but hear the motor, check motor coupler, or if it never spins after you close lid, check lid switch. These are the most common solutions to this complaint.

Sep 02, 2014 | Washing Machines

1 Answer

I have a Kenmore/Ultra Fabric Care IV - Heavy


Sounds like the machine is stopping to me, could be the off balance switch at the rear off the machine. You should know if its getting to the spin cycle.How wet are your clothes ? Hope this Helps.

Sep 15, 2009 | Washing Machines

1 Answer

Direct drive-type Kenmore washer will not spin.


Check the video at the following link. I think you will find it helpful. Hope so and best wishes.

http://www.youtube.com/watch?v=WLPGs2UMUJc

Sep 14, 2009 | Washing Machines

1 Answer

Kenmore 80 Series washer will not spin; MOD#110-22882101


you need to replace the motor coupler between the motor and the trans.,let me know if you need more help,mike

May 26, 2009 | Washing Machines

1 Answer

Kenmore 80 Series washer wont spin or drain at end of cycle


POST ME THE MODEL NUMBER. AND ALWAYS POST MODEL NUMBERS WHEN NEEDING ASSISTANCE PLEASE:)))

Apr 17, 2009 | Washing Machines

1 Answer

Kenmore washing machine will not drain


Replace the timer.
This is a neutral drain machine. If there is no natural pause in the timer at the end of the rinse cycle the timer is bad.

Mar 13, 2009 | Kenmore Washing Machines

1 Answer

Washer won't drain


Dear cbringer,
I have the same washer. I have had the same problem with it. It's the timer module. You can get additional help from http://www.repairclinic.com.

Hope This Helps,
Jay

Mar 12, 2009 | Kenmore Washing Machines

1 Answer

Washer over flows


Dear Cbelton

please inspect the following

  • Inspect the water supply connections
  • Inspect the drain hose
  • Inspect the water pump
  • Inspect outer tub for cracks or corrosion
  • Inspect the tub seal
  • Inspect the tub bearing

  • please rate this solution.Thank You..

    Dec 16, 2008 | Kenmore 24032\24036 Top Load Washer

    Not finding what you are looking for?
    Kenmore 24902 Top Load Washer Logo

    237 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Kenmore Washing Machines Experts

    Richard Roth
    Richard Roth

    Level 3 Expert

    9472 Answers

    Jesus  Colon
    Jesus Colon

    Level 1 Expert

    12 Answers

    Fred Sops

    Level 2 Expert

    271 Answers

    Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...