Question about Ricoh Aficio SP C811DN-DL Printer

3 Answers

Page counter on RICOH aficio SP C811DN

How, I spent 10 mins looking through the menu and cant find it anywhere... I know on most Ricoh made you press another button but can't find an obvious one on this model...

Any help would be greatly appreciated

Posted by on

  • chuck627 Apr 22, 2009

    I have a ricoh spc811dn
    I would like to be able to see how many sheets have been printed during a run but can't seem to find a counter. One time before I was able to get into it by accident but do not know how I did it.
    Any ideas?

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Enter the menu of the printer pressing once the relevant button and with the up or down buttons find the list test print. Then press once # or OK (whatever the machine has) and you see Configuration page. By pressing once again the # or OK it prints the Config.Page, which somewhere on the top of thw sheet shows the pages printed (first the black and then the colour. Good luck!

Posted on Sep 09, 2009

  • eloise Sep 17, 2013

    thanks, it did it for me

  • Fotisin Jan 14, 2014

    Usually, the printer is set in A4 - A3 counting as default factory setting. Therefore, unless someone has change the counter to developments (meaning one click for eather A4 or A3 size), it will show the A4 pages printed on the top of the configuration page which is going to be printed!

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

There are two ways to get this . the easiest is to go to your computer and open your internet explorer, in the web browser window type in without the www the ip address of your machine. if you don't know what it is then go to start, settings, printers and faxes. Right click on the ricoh printer and select properties. go to the port tab and see what the port ip address is. it should be a 4 segment number like 192.168.1 201. Once you type this in the web browser you can see all the info on the machine including meters and toner amounts.

Posted on Dec 19, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

How to read copy counter

Posted on Aug 31, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i reset SC542 error in Ricoh Aficio SP300DN?


FOR RICOH AFICIO SP 3400SF follow below steps.

1. To access Service Mode, On Control Panel press following buttons one
by one immediately.

Cancel Button (Red) ---> 1 (Numeric One) ---> 0 (Numeric zero) ---> 7
(Numeric Seven) ---> Copy Button (Green)

2. In Service Menu you will find Engine reset Menu. In that you can reset
SC 545 in Fuser Reset Menu. And you can also reset SC 542.

Feb 23, 2015 | Ricoh Office Equipment & Supplies

1 Answer

Sc541 ricoh 1060


Verify the fusing unit contacts,thermistors and thermalfuses,heater lamps continuity.If is OK enter in the service mode:press yellow key -1-0-7 and press and hold 4 seconds the C red key.When appaire to the touch pannel service menu or copy sp press the windows,open the front door,close the copier machine on the main button and wait 10 seconds.Press ON the main switch close the front door and make a copy.If anywhere is replaced the heaters lamp,check the contact in the back side Orange wire to Orange wire,and the Red wire to Red wire contacts.

Dec 02, 2010 | Ricoh Aficio 1035 Copier

1 Answer

I do not know how to graph using absolute values on my casio fx-9750GII. Is absolute value even possible on this calculator because i cant find it anywhere on the keys or in menus (unless im not looking in...


Hey it is. Okay, so start with a equation: say, y = -(1 |x|). Now type y = -(1 , then press the [OPTN] button, next to the shift. Next press the [NUM] button or F5. The first menu button should be Abs or absolute value. When your done it should look like this. y = -(1 Abs (x)) then graph it.

Aug 18, 2010 | Casio FX9750GII Graphic Calculator

1 Answer

Hi, i have a ricoh af 3045, i cant input a user code or set admin password because the machine dissplay´s this mesage, you do not have the privileges to use this function.


Press the clear modes key.Press the clear/stop key more than 3 sec untill the user tool menu appears on the touch pannel.Select the menu number to use by touching the touch pannel display.If the copier is set to use user code function operators must input their user codes before the machine can operate.The copier keeps count of the number of copies made under each user code.User tools 8-9-10-11 are for the user code mode,when you want to use these user tools you should enter the key operator acces code first.
Please connect me for other detailes or help.

Dec 24, 2009 | Ricoh Office Equipment & Supplies

1 Answer

Ricoh c3000 replace fuser error


I am not sure if you can, but I had this issue too.

Go to the menu key. Use arrows to find "maintenance" and press enter.

Use arrows to go to Maint. reset and press enter.

Use arrows to display fusing unit and press enter.

It will tell you to press # - press enter.

If that doesn't work, you may also want to try pressing and holding the escape button for 5-10 seconds and it will reset itself.

Good luck!

Feb 02, 2009 | Ricoh Aficio CL3500N Laser Printer

1 Answer

Ricoh fax/copy machine


Instructions for 1013F are as follows:
above the blue numeric keys 2/3 there is a button with a small box with 123 in it this takes you in and brings you out of the USER TOOLS MENU.
Press user tool button once...user menu on display
use right arrow key...press3x..Fax Feature..press ok
right arrow2x..ok
again right arrow2x.ok....DATE/TIME on disply .ok
change then ok it once done exit by the 1st button you started with...USER TOOL BUTTON. all the best....

Mar 28, 2008 | Ricoh Aficio 1013F Copier

3 Answers

Ricoh 1515 MF shows error code sc542


Um.. I don't see an "online" or "escape" button anywhere on the printer...

Mar 07, 2008 | Ricoh Aficio 1515MF All-In-One Laser...

2 Answers

Ricoh CL2000N Error


should have a menu option for clearing errors. or just restarting the printer.. to find out what the error is call ricoh support.. typically if you have a printer like this, you have a service contract with company that handles the repairs and maintainace.

Jan 22, 2008 | Ricoh Aficio CL2000N Laser Printer

2 Answers

Booting the RDC-7


The camera is dead now if the wrong upgrade was used there is no undoing it. Plus the fact it is six years old. Money better spent on getting a modern camera because no repairs are possible.

Jun 16, 2007 | Ricoh RDC-7 Digital Camera

Not finding what you are looking for?
Ricoh Aficio SP C811DN-DL Printer Logo

1,380 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts

Adorjani Laszlo

Level 3 Expert

1297 Answers

OfficeServiceAjnc
OfficeServiceAjnc

Level 2 Expert

183 Answers

fares

Level 1 Expert

67 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...