Question about Philips Magnavox DVD/VCR Dual Player

1 Answer

Magnavox MWD 2205 dvd/vcr player won't record more than one show on timer

I have my timer set to record for me everyday. There has never been a problem up until a month ago. My player usually always records the first couple of shows because they are back to back and on the same channel. As far as the other programs which are later in the day, the player will come on and then cut off. The timer light just blinks after it cuts off. I don't know whats going on. I thought that it might have been the tapes, so I went and bought new ones. Same result though. I'm thinking now maybe the heads need to be cleaned. Can anyone help with this problem before I get too frustrated and just go buy another one?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 899 Answers

This is a common repair if when you press play on a tape and the the tape stops
it is a slipping belt or there is a clutch disk that starts slipping when it wears down

if it is only not recording the time recording then there could be something wrong with the timming circut. unplugging for a while can reset this. if not it needs repair

dirty head would result in snowy , messed up picture
dirty roller that pulls the tape will result in tapes eaten , tape stop and machine lockup

Posted on Oct 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need parental level 4 digit password for magnavox MWD 2205 DVD player


EASY PROCESS LOL
Instructions
    • 1 Press the "Stop" button on the remote if you are currently watching a movie.
    • 2 Press the "Setup" button. A menu will appear on the TV screen.

    • 3 Tap the "Left" and "Right" arrow buttons until "Custom" is selected. Press "OK."
    • 4 Select "Parental." Press "OK."
    • 5 Enter your four-digit PIN number. If you forget or do not know your code, enter "4737" to override the security. Press "OK."
    • 6 Tap the "Up" or "Down" buttons until "Parental Level" is selected. Press "OK."
    • 7 Select "All." Press "OK."
    • 8 Press "Setup" to exit the menu. The MWD7006 is now unlocked.

Sep 21, 2012 | Philips Magnavox DVD/VCR Dual Player

2 Answers

Just hooked up my new Magnavox DV220MW9 DVD Player ? VCR Recorder. I was able to set the time and a vcr timer program but now I can't switch the source. It now comes on as the DVD but neither the remote...


You need to release the timer to access the VCR. Press the Timer Set button on the remote or the Stop/Eject button on the recorder. Then press the VCR button.

Please note: the scheduled recording will not run as programmed unless you press the Timer Set on the remote again. (The timer locks the VCR until the scheduled ON time.) The DVD player is controlled separately and becomes the default unit.

I hope this helps.

Cindy Wells

Oct 04, 2010 | Philips Magnavox DVD/VCR Dual Player

1 Answer

Have a Magnavox DVD/VCR player Model MWD 2206A,


units like DVD's, have the tendency of malfunctioning if not used for quite sometimes.corrrect me if i'm wrong.but like automobiles needs tune-up, right?try power it on for some time, but not using it.if still not call a tech

May 13, 2009 | Philips Magnavox DVD/VCR Dual Player

1 Answer

Magnavox 2205 DVD/VCR Output Channel Control


1: set tv to channel you want your vcr output to be on. 2: turn vcr on (if it is a vcr/dvd combo make sure it is on vcr) 3: put in video tape. 4: press play button one time, release it, and then press and hold it for three to five seconds. i had to call customer support to figure this out on mine.

Jan 17, 2009 | Philips Magnavox DVD/VCR Dual Player

1 Answer

Vcr will not record


THE CABLE OR ANTENA NEED TO SCREW INTO THE INPUT OF YOUR UNIT THEN A SMALL WIRE OUT TO THE TV FROM YOUR UNIT PUSH RECORD WHEN SHOW IS ON TV !SO ITS CABLE INTO VCR INPUT THEN CABLE FROM OUTPUT OF VCR TO TV ....TV ON CHANNEL 3 AND VCR UNIT ON CHANNEL 3

Dec 07, 2008 | Philips Magnavox DVD/VCR Dual Player

1 Answer

Code for magnavox vcr/dvd player


I am going to assume you are talking about a code for a universal remote control.

It could be one of these:
434 934

The website with the most codes I have seen is http://dogbytecomputer.com/codes.htm#DVD CODES

Aug 13, 2008 | Philips Magnavox DVD/VCR Dual Player

4 Answers

Free download user manual


i have Philips Magnavox MWD 200G model dvd player purchased in usa and put to use in India.it was rep[aired due to high voltage.later it is showing disc error for any cd or dvd whilke playing and indicvates that the play back feature nay not be available on this disc.but it plays Fuji Film DVD R.please advise me how can i solve the issue for playing the other cds or dvds

Mar 10, 2008 | Philips Magnavox DVD/VCR Dual Player

1 Answer

My vcr won't play back


I have a Magnavox zv457mg9 DVD&VCR combo ,and the vcr records for a short period(10minutes) and then cuts off. This happens each time I try to record on the VCR. Any suggestions??

Feb 26, 2008 | Philips Magnavox MWR20V6 DVD Recorder/VCR

Not finding what you are looking for?
Philips Magnavox DVD/VCR Dual Player Logo

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips DVD & Blu-Ray Players Experts

Steven

Level 1 Expert

6 Answers

Cindy Wells

Level 3 Expert

4754 Answers

rugby prop

Level 3 Expert

446 Answers

Are you a Philips DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...