Question about Panasonic Workio DP-4530 Copier

2 Answers

Machine error E04-01

Hi
can you help me in solving this error, what remedy can you suggest and what does it mean E04-01. thank you for your help

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 284 Answers

Error e04-01 means fuser warm up temperature

problems could be

-fuser thermister dirty ir defective

-fuser lamp is disconnected or defective

-fuser thermostat is defective

Posted on Oct 22, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 100 Answers

You may go for the min time to service mode (funtion+orginal size A3+3), F9 mode, ram initialize, then find LBP FUSER RESET. then restart your machine.

Posted on Dec 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I solve c2557 error ?


Hi
I found your error code and suggested remedies here:
Error Codes Konica Minolta bizhub 250 Code C2557
This site is very useful as by changing the drop down menus along the top of the page you can view other errors for your machine and for other models and makes. You can also use the link to get a pdf format Service Manual for your machine.
Hope this is helpful, if so would you please register that with Fixya
Cheers

Feb 09, 2015 | Konica Minolta bizhub 250 All-In-One Laser...

1 Answer

Remedy for my Sharp ar5316e displaying error L4


Hi,
I think one time servicing your device then may be solved your issues.

Thanks,

Sep 05, 2014 | Printers & Copiers

1 Answer

I was not able to print because it has shown machine error 48, what does it means ? please help me to solve this problem . Thanks .. Glorie A. Fernando


Error #48 means that there is a problem on the print head. I would suggest going to control panel, find your printer, right-click and open "properties", and have the printer do a head cleaning as well as a printer head alignment.

Oct 28, 2010 | Brother Printers & Copiers

2 Answers

As soon as the printer is turned on the red error light flashes and that is all that happens. I have tried a known working drum assembly and toner from a working machine same result, All I can get from the...


Make sure there is not any paper jam inside the printer.
Open the side plate and back side of printer.
Then you can see fuser assembely.
Then make sure there is not any jammed paper and roller is working properly if roller is broken then you need to change it.
Then fix fuser assembely then check.
Let me know if you need further assistance.
Thanks for using Fixya.

Apr 24, 2010 | Panasonic KX-P7100 Laser Printer

1 Answer

Mistake number 421*


According to HP, this error code means that a handshaking (connection) error occurred at some point in the process from the sending fax machine. They suggest to try the fax at a different time when telephone line conditions have improved, or that in some cases the error can occur if the other fax machine is using a fax format incompatible with the HP fax.

Dec 16, 2009 | HP OfficeJet 6110 All-In-One InkJet...

1 Answer

Hi I have Ricoh Alficio 2032 copier. There is C545 error message


I'm assuming it's SC545. It pertains to temp not being correct in the fuser. Possibly a thermistor, thermal fuse or lamps are bad. It's one of the codes that need to be troubleshot and replace whatever is needed before clearing the code. This is to prevent further damage to the machine. Thanks Colin

Jun 28, 2009 | Ricoh Printers & Copiers

3 Answers

Connot send fax


hi there!

thanks for using Fixya.com!

I suggest you try to call first the receiver and ask, perhaps they are having with their lines or fax machine. From your side, pls check with your Telephone provider for assistance.

In addition, pls check your cables, and connections.

Regards!

Pls. don't forget to mark!

Feb 18, 2009 | Canon PIXMA MP530 All-In-One InkJet...

3 Answers

Printer HP ColorLaserJet displays Fuser Error


My HP Color Laserjet 2600n Printer is giving me error as

" 50.2 Fuser error " . then every time i have to reatart my printer.
please give me suggestion.

thanks and regards.

ajinmumbai

Dec 05, 2007 | HP Color LaserJet 2600n Printer

1 Answer

ERROR #17


According to my information Error 17 means:

CPU error (Interrupt exception)

Therefore I would suggest you take the machine to a repair center and have the main board checked out. This does not appear to be an error you can easily fix at home.


Please rate post as SOLVED

Nov 09, 2007 | Minolta magicolor 2300W Laser Printer

2 Answers

Error code


Hi Jakabi. That error code means there's a defective module in the printer. It's not user replaceable, unfortunately. The only solution is to contact the store where you bought it, or Canon's tech support to get a replacement. That comes directly from Canon support ! I know it isn't what you'd like to hear, but unfortunately it's the only way out of it. Thanks ! cheebster.

Jun 20, 2007 | Canon Pixma MP500 All-In-One InkJet...

Not finding what you are looking for?
Panasonic Workio DP-4530 Copier Logo

1,583 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Printers & Copiers Experts

Mohan Sriraman
Mohan Sriraman

Level 2 Expert

490 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4761 Answers

Are you a Panasonic Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...