Need programming directions for emerson jum...

Code search by device

turn on device you want to control (tv, vcr, dvd)

press and hold the CODE SEARCH button untill the red indicator light remains red, then release

press the desired mode button ( tv vcr dvd) and release

press the CHANNEL UP button repeatedly ( up to 300 times)
until device changes channel the red indicator blinks then stays lit

press and release the Enter button to install code Another view: Someone on another board pointed out that with some newer models you do not need to press the CHANNEL UP button repeatedly. Rather, you press it only ONCE, and the device will cycle through all the code possibilities. When the TV turns off, it means that the proper code has been found. Immediately press the Enter button to install that proper code. This method (and no other) worked for me.