Question about Televison & Video

Open Question

I HAVE A VCR-DVD COMBO MODEL DRC8335. LAST YEAR I HAD TO EXCHANGE IT AND WHEN THEY SENT ME THE NEW ONE. I THINK THEY SENT THE WRONG REMOTE AS IT IS AN RCA197DA2,AND SHOULD HAVE BEEN A NUMBER RCA192DA3 WHICH IS PICTURED IN THE USER MANUAL. IT WILL TURN THE UNIT ON AND OFF BUT WILL NOT PLAY A TAPE OR A DVD. I NOW FIND OUT THEY NO LONGER MAKE THE REMOTE WHICH GOES WITH THIS UNIT. I JUST PURCHASED AN RCA UNIVERSAL REMOTE WHICH HAS 19 CODES TO ENTER INTO THE REMOTE. WHICH ONE DO I USE WITHOUT ENTERING EACH ONE TO SEE IF IT WORKS OK. I ALSO FOUND OUT THAT THE EXCHANGE UNIT HAS ONLY A 90 DAY WARRANTY SO I GUESS IT IS ON MY DIME; CAN YOU HELP ME IVO RANDELS

Posted by on

5 Suggested Answers

SOURCE: programming rca universal remote for my toshiba tv

I can't exactly help you, but can you tell me how you programmed the remote to your TV, because I cannot get mine to work...

Posted on Sep 12, 2008

techman
  • 3130 Answers

SOURCE: No picture while playing DVD or VHS tape

Your unit has it seems to have developed a video problem. it could be in the video switching IC or the video processor. Its going to need a trained technician, who knows how to use an ocilliscope to find the video problem.. Good Luck

Posted on Aug 02, 2006

  • 9 Answers

SOURCE: jumbo universal remote

I found that on the back of the 2205 it said that the unit was made by Funai. I looked in the Innovage book and found that the codes for Funai DVD are 231 and 233. 233 worked on mine. Good luck.

Posted on Jan 06, 2008

bubba10560
  • 1 Answer

SOURCE: programing rca remote for dvd/vcr combo

all you have to do is press and hold code search when the light shows up let go of code search then press VCR and it will blink onces and let go of VCR and press OFF/ON about 50 times and then press enter onces and there you go

Posted on Mar 07, 2008

  • 123 Answers

SOURCE: Aiwa tv/vcr/dvd combo mfg. 2003

http://www.urc.philips.com/

Have you tried going here and looking for your codes? Good Luck.

Posted on Apr 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot connect a VCR/DVD player to Zenith SY1959Y


you don't need a code for the vcr/dvd combo to work on your tv. You need to make sure you have hooked up the cables correctly. remember that the dvd can be hooked up with the component cabels and the vhs may need to be hooked up thru the tv cable hookup.

Jan 08, 2009 | Hitachi UltraVision CineForm 55VG825 55"...

1 Answer

PANASONIC COMBO TV DVD VCR,REMOTE CONTROL NOT WORKING,NEW REMOTE CONTROL STILL INOPERATIVE,SUSPECT INFRARED RECEIVER IN TV,NEED SCHEMATIC OF A PV-DM2792 TKS


You can try replacing the remote receiver inside the set. This should be a small silver box located in the front of hte set. It should have 3 leads soldered to the board. The part number is:
LSSZ0004 and costs about $5.

Dan

Jul 03, 2008 | Televison & Video

1 Answer

I can't find a code on a rca universal remote control. the brand is magnavox. it has dvd and vcr all in one


I own a One-for-All universal remote and my booklet says the setup code for a Magnavox TV/DVD/VCR combo is 0821. I do not for sure if this number will work with your remote, but it is worth a try.

Jul 03, 2008 | RCA Televison & Video

1 Answer

I have a Sylvania TV/VCR combo, model 3913LC manufactured in 1999 that has been working just fine except for the remote control, which stopped working--even though I changed the batteries. I purchased a...


You will need one that is designed for a TV/VCR combo. Go to this link they have universals that are for TV/VCR combos i am pretty sure they have one that will work.
http://servicemanuals.vstore.ca/

Apr 12, 2008 | Televison & Video

2 Answers

Aiwa tv/vcr/dvd combo mfg. 2003


what model uni remote do you have??
Aiwa i think is now sony. so try some sony codes.
also have you tried to auto search for your code?

Apr 09, 2008 | Panasonic PT-47WX53 47" Rear Projection...

1 Answer

Where can I get the remote control for Color TV/DVD/VCR Triple combo CWF719 (19inch)


www.replacementremotes.com should have the remote for your set. Just enter the model number of your set in thier search box.

Apr 08, 2008 | Televison & Video

1 Answer

I have a Magnovox tv/vcr combo that I am trying to use the antenna on but it will only let me switch back and forth between Aux or channel 3. I do not have the remote. Is that my problem? Will a universal...


Yes a universal control should solve your problem but I would try to connect my tv to my vcr or dvd and my antenna to my vcr or dvd as well then change your channels thru your vcr or dvd!

Mar 28, 2008 | Televison & Video

1 Answer

Connecting VCR/DVD combo


Confusing! TV with NO yellow,red white input ? Buy an RF
adapter Radio Shack about 30.00.....TV has input ? = yellow
video,audio R,L from Insignia source dvd/vcr out ( audio R,L,
video {yellow} ) You don't need to switch cables.As to record
feature,consult owners manual..................................T

Nov 21, 2007 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71095 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

66433 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...