Question about Swintec 7040 Typewriter

1 Answer

Settings when i type a chacter its type something else???

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 183 Answers

Check to see if there is a "kybrd 1 and kybrd 2 " switch. should be on kybrd 1. also there is a pitch switch that needs to be the same as your printwheel. look for a switch that has 10, 12, 15 and PS printed beside it. if you have a 10, 12 or 15 pitch printwheel it won't print properly on PS. a PS printwheel won't work on the other settings. also check to see if anything is anything is touching the printwheel. then check the printwheel to make sure none of the fingers is bent out of place. if none of this seems to work, you probably have a bad main board and will need professional repair.

Posted on Oct 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a panasonic electric typewriter R330 and it only types about in inch then stops how can i fix it?


The right margin is probably set. Hit margin release( MR) and see if it types, if so reset your right margin. Also something could me binding or caught in the path. maybe a correction ribbon or something is blocking it.

May 30, 2012 | Panasonic Refurbished Kx-r330 Typewriter...

1 Answer

Had dell axim51 for years...never was able to connect to wireless or any internet


The way to connect to the internet with you Axim is dependant on the wireless router setup.

for instace if the wireless is set up for WEP encryption there is a ( I think) about 8-10 hex chacters(0-9, A-F) that needs to be entered to connect. You will need to find these on your router.

Other system that are not protected should have no problems. connecting
hit the broken bars and the lower right corner, then hit the turn on button, then click on the site tab, this hould show you what networks are available. It will tell you if it is protected or is an open network.

This unit will only connect to 802.11 B wireless networks.

Aug 28, 2011 | Dell Axim X51v Pocket PC

1 Answer

I have'nt been on wii fit for a while so when i went on i forgot my password and my height so i can't get on my chacter please help


I think if you get the password wrong like ten times, the game will ask if you are that player and ask for your height. I think if you get that right, the password will be erased.

Jun 10, 2010 | Nintendo Wii Fit for Wii

1 Answer

In game,my chacter runs around in circles all the time,i have replaced the analog stick twice,to no avail.what could be wrong?


you need to rub the surface of the circuit board that the analog is placed, tightin up the screws or change the tiny rubber where the wier goes through.

Feb 12, 2010 | Sony PlayStation Portable (PSP) Console

1 Answer

I am having a problem when I type and the cursor moving


This happens when your hands get to close to the palmrest and your wrists are actually causing the cursor to jump to another spot. Go to the control panel > mouse> settings > highlight the touchpad listed and select the settings button. Look through the entries and there is a setting for palmrest sensitivity. Turn down the sensitivity so your hands and wrists don't trigger a cursor movement. The hardware and drivers are fine, this is a setting adjustment.

Oct 10, 2009 | HP Pavilion DV6700T Notebook PC

1 Answer

When typing a text, I can't pick the letters or numbers I want.


that means your messaging font is set to type the word for you. find "options" then look for soomething that ays "abc" your phone is set to type in "t9"

Apr 09, 2009 | Nokia 6085 Cellular Phone

1 Answer

Bar code


try changing the chacters per line, print out a config page and towards the bottom of this it will state the current settings

Jul 15, 2008 | IBM Infoprint 6500 Matrix Printer

1 Answer

Typing on the moto q


There is an option on the settings for word recognition, Try going to start>settings>more>more>text input settings>uncheck text prediction.

Dec 30, 2007 | Motorola Mobility Q Smartphone

Not finding what you are looking for?
Swintec 7040 Typewriter Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Swintec Office Equipment & Supplies Experts

James Cagle
James Cagle

Level 2 Expert

453 Answers

Jim Keysor

Level 2 Expert

329 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Swintec Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...