Question about Sony FD Trinitron WEGA KV-27FS100 27" TV

1 Answer

Screen Goes Black

TV is on, Picture and Sound is fine then all of a Sudden the screen goes Black but the Sound is still there. It will stay Black for 20 to 30 seconds and then comes back on. Repeats this Pattern every 20 to 30 Minutes.

Posted by on

  • allstarz Oct 18, 2008

    Since my last posted my problem has changed. My Picture is coming and going every few seconds. Screen goes black. Picture color is no longer good, its greenish now. I have notice there is a light that flashes when the screen goes black, the light is located next to the power button. Over the light it says "Stand by/Timer". This is a Model KV-32FS100



    Thank You for any help,

    allstarz

  • satromsu Feb 10, 2009

    My Sony KV-32FS10 has sound but no picture. The red 'stand by/stereo' light on the bottom of the TV itself (not screen) is blinking off and on. Please help! THANK YOU!!!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

It sounds like your "lamp" is going out look for a hidden compartment.. or in your owners manual to see where its located its an easy fix and costs much less than a new tv

Posted on Oct 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Curtis LCD2425A flat screen tv it powers on fine with picture and sound. After about 20 minutes the screen goes black but the sound works fine. If you turn the set off and then back on the Curtis...


Back-light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/

Jan 11, 2015 | Curtis LCD2425A TV

1 Answer

Screen goes black but still sound


This is inverter or backlighting problem. Can you try switching it on and off quickly for a couple of times and tell me if these '2 seconds' get any longer'. If picture stays longer and longer before shutting down, one lamp needs replaced-if not, please replace inverter board

Jan 15, 2010 | Goodmans GTVL19W17HDF 19 in. LCD TV

1 Answer

Sharp LCD TV, Screen goes black sound stays on


Capacitors on the power pack are going bad they need to be replaced that should fix the problem.

Apr 07, 2009 | Sharp LC20SH7U Television

1 Answer

Sony kv35s66: No picture, just sound and red blinking


This should be a quick fix. Try resoldering the vertical IC. This is a small flat IC attached to a heat sink with about 11 pins. It should be marked LA7837 or something similar. That should resolve the problem.

Keep us posted.
Dan

Sep 08, 2008 | Televison & Video

1 Answer

Sony KF-60WE610 Screen and Sound On/Off


All symptoms in your TV shows that you need to replace its Lamp as it has been consumed its life hours and TV requires new lamp. Lamp can be obtained from Sony Website. Price is $200, Hope this info will help you to enjoy your Sony TV in coming days.

Aug 17, 2008 | Sony Grand WEGA KF60WE610 60" Rear...

1 Answer

TV screen goes blank but power stays on


Sounds like the CRTs are going into protective blanking due to the vertical output ic needing to be resolderd. Try resoldering the vertical IC that may possibly fix the issue.

Jun 15, 2008 | Mitsubishi WS-73713 73" Rear Projection...

2 Answers

Tv screen goes black


No, if the picture of your tv screen is clear when when you watching. the troble of your tv is looseboard, and you replace your CRT socket too.

Apr 16, 2008 | Sony KV-35V35 TV

1 Answer

Sound but no picture


Basic repair for skilled TV repairman = solder connections on
vertical output IC.........Can be done in home.....T.

Nov 28, 2007 | Sony KV-35S42 35" TV

1 Answer

Sony kv35s66: No picture, just sound and red blinking


The most common problem (I have fixed lots) is the Vertical amplifier has developed a loose connection. It probably just needs resoldering. As things expand it makes and looses connection you picture goes in and out. The vertical chip is a large black chip that gets hot, over time it degrades the solder until a connection is damaged. Most newer sets have a protection circuit that senses the lack of height, and shuts down the picture tube to save it. When the picture dropped to a line on older TVs and left that way too long it would burn a line into the face of the picture tube. You then had to have the picture tube replaced along with the vertical amp. it's kinda like a screensaver for your TV.

Nov 21, 2007 | Sony FD Trinitron WEGA KV-32FS120 32" TV

Not finding what you are looking for?
Sony FD Trinitron WEGA KV-27FS100 27" TV Logo

Related Topics:

427 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

72670 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...