Question about Audio Players & Recorders

4 Answers

1968 ami rowe mm-2 juke box

When selection button is pushed carousel will not stop at that selection.it will stop at a differant number,play,return record to carousel then keep spinning.thank you for your review of this problem.my e-mail is rrielli@hotmail.com thank you again

Posted by on

  • 1 more comment 
  • rrielli Oct 16, 2008

    this occurs regardless which selection buttons are pushed

  • rrielli Oct 17, 2008

    rowe ami mm2 music master juke box 1968 when a selection button is pushed it does not go to that selection,but another.after play and return of the record to the carousel it still keeps spining.is their an adjustment out of whack?could it be the stop switch or its componants?please help.thank you.

  • rrielli Oct 20, 2008

    its not just one button,it is any of the buttons you push.could it be in the selector box or stopswitch?

×

4 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 54 Answers

U have to check the button bcos it would make a problem or else go for a check in mechanism in which it runs the tape then check out the wires, better service in an authorised service centre

Posted on Oct 17, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 231 Answers

Iwould be looking at the brake mechanism inside, it sounds as though the solenoid to activate the brake is no functioning properly, could be getting tired or possibly a loose wire.
good luck.

Posted on Oct 17, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 65 Answers

I think there is a problem with the button... u need to change it... just contact the manufacture or an authorized serviceman to fix the problem

Posted on Oct 16, 2008

  • navidh
    navidh Oct 16, 2008

    ok... then this might be a problem with the motor which runs the tape... if it doesnt rotate properly then this can happen... you have to service it or get a new spare

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 306 Answers

The button may be repaired i suppose.. you need to replace with a new one else sontact a service center.. u stop pressing it and replace it.. if it goes on running it may create a master problem.. so first change the button!!
chek tis out http://tomszone.com/serialami.html

else 
look out
http://www.gameroomantiques.com/Manual.htm#AMI-ROWEJUKEBOXES

Posted on Oct 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

CD operation problem. Need manual.


You'll just need to disable the Random Play mode. I'll give you the link to the manual in a minute.

Oct 24, 2008 | Philips AZ1020 Boombox

1 Answer

My sony cfs-w360boombox plays tape at high speed upon play, normal or high speed poition


there may be 2 possibles

1, the pinch roller is not going down and staying in the fixed when during playback, easy way to check power down the unit, press play and see if it looks firm, it will push back, if working right

if its loose, it may well have come off a little sping, and may well be an easy ish fix, by someone who know about cassette decks,

2, the speed adjustment has failed, there will be an internal speed control, which keeps the playback at a correct speed, if this has failed it may be fixable, but only by someone who can take it to bits and remove and solder a new one in, and they are very small and Sony items i have had have failed on speed control! too for me its a junker box

good luck

Sep 24, 2013 | Sony Boom Box With CD Player & Cassette...

1 Answer

Can't play the cd


After putting in the CD, move the switch on the back to the CD/Line In position. (The other switch positions are Off, AM, FM.) The switch is next to the Line In (3.5 mm) jack. Then press Play/Pause on the front of the boombox. This is the single button on the left side (The adjacent pair of buttons are the search (reverse/forward tracks). On the other side of the LCD display are the Stop, Repeat and Program buttons.

GPX has the manual for the GPX BC232 on the product page: http://www.gpx.com/store/p/822-BC232R.aspx . Click on the tab for Downloads to get the manual link. The direct link is http://www.gpx.com/owners_manuals/BC232-578-01-IB.pdf . You will need Adobe Reader or a similar program to access the manual.

I hope this helps.

Cindy Wells

Jan 08, 2013 | GPX BC232R Radio CD Player Boombox

1 Answer

I have memorex radio/cd/cassette player model MP3226. The PLAY button on the cassette tape does not stay in the down position when pressed when a tape is in the housing. If I remove the tape, and press...


I can imagine 2 cases for your problem:
Either there is a mechanical problem and something is not allowing the "play mechanism" to go all the way up to the clip position when the cassette is in the housing,
Or the tape isn't rolling up properly. Some of these deck's have some kind of protection and when the tape isn't rolling properly a system stops the play procedure. Check if both of the rollers for the tape are spinning around properly. In case of not spinning, run the cassette fast speed forward and backward in order to come to the proper state. Also check without any cassette is any roller spinning around or not?

In case of a problem or clarification or further details needed, don't hesitate to post me a reply before rejecting my answer.
If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Thanks and regards
Please kindly rate this solution
Stelios
direct fixya link: http://www.fixya.com/users/technical114

May 15, 2011 | Memorex MP3126 Cassette/CD Boombox

1 Answer

How do you start a tape to play ok..i turn on...put in a tape....now, how do i get it to play


Look for a symbol that looks like this >I. or just this>, and push. Make sure you have selected "tape" function

Apr 10, 2010 | Sony Boom Box With CD Player & Cassette...

2 Answers

How do I tape to tape


you mean to record?first,you must connect the other unit (if you are using two cassette)by using rca plug or earphone plugs.insert the plugs to audio in or aux(this is the unit that will record).if the other unit doesn't have the output audio,use the earphone out instead.time to record.the recorder must be set to tape/aux,(if you are using a unit with radio setting).then,push the play and record button at the same time.don't forget to put in the blank tape ok.then push play to the unit that you want to be recorded.the square symbol is for stop.the arrows pointing left ,rewind.pointing right, forward.the big arrow pointing right is the play and the button next to it is the record button.

May 14, 2009 | Panasonic RX-D29 Radio/Cassette/CD Boombox

1 Answer

I need information on how to operate a tape in my machine. I can insert the tape, and push the button to start it playing, but the tape does not play. Which of the 6 buttons will get the tape to play?


My solution was to get my son to e-mail me the list of instructions that I couldn't find with my machine. The instructions, although vague, were very helpful!

Jan 06, 2009 | Sony Boom Box With CD Player & Cassette...

3 Answers

Rowe ami jukebox


Check the optical sensor, it may be blocked with dust.

Jun 09, 2008 | Audio Players & Recorders

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

561 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

98868 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

The Knight
The Knight

Level 3 Expert

69845 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...