Question about Canon PIXMA MP810 All-In-One InkJet Printer

2 Answers

Changing default language in Canon Software for MP810

Hi!
When I install Navigator and other software for the Canon MP810 multifunction inkjet printer, booth the installation and the software language comes up in THAI. Thai is not even installed on my comp....I can't find a way to install and run the software in plain English.
What to do?

Thanks in advance!
Cheers
Chris Odbratt

Posted by on

  • thaichef Oct 16, 2008

    I have tried to download from the US site, as well. Same problem, it all still comes up in Thai.

  • Anonymous Apr 05, 2009

    Menus and Drivers come up in Thai

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hi I had the same problem with an ip4500
Go to printers and faxes in the start menu, right click on your printer, left click on printing preferences, this should be the second line down, the print pref. menu window will open, you may not be able to read any of this, on the top should be five tabs, the last one is the maintenance tab (has pliers and screwdriver symbols), left click on this tab, you should see all the maintenance buttons with icons inside and six rectangular buttons in the bottom right hand corner (four on the bottom and two above them), ignore the four on the bottom for now, ( with right to left languages such as Arabic the upper two buttons are on the left hand side and the button you need to click is on the left side) left click on the button that is on the right hand side of the two buttons above the other four, a smaller window will open with three buttons on the bottom, directly above this is a bounding box with a drop down arrow on the right hand side ( left side for R to L languages), click the arrow, find "English" or whatever language takes your fancy, click on it, now of the three buttons on the bottom of the SMALL window click the one on the left( right for R to L languages), the small window should close, then of the four buttons on the very bottom of the pref. window ( these are the four you ignored before ) click the one on the left, the window will close. Go back to printers and faxes, right click on your printer, choose print pref. and your menu should be in your new language. Hope this helps.

Posted on Apr 05, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,472 Answers

It seems that the CD you received with your machine is not an English language CD (even though the label may be in English). You can download the driver and Navigator, as well as other software, here.

Posted on Oct 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mp navigator


try this solution..... http://dailytweak.wordpress.com/2011/07/13/mp-navigator-scan-failed/

May 01, 2013 | Canon PIXMA™ MP810 All-In-One InkJet...

1 Answer

The scanning feature is not working on my Canon MP810. After I place the document on the platen glass I am unable to proceed any further with the process. The printer does not seem to recognise it when I...


Kindly install the scanner software for printer the driver software cd just re install it will install the scanner software and make sure in device manger there is not other usb device listed if it is there just remove it. And refresh it in will automatically install the driver.

Hope this helps. Please rate my response.
Thanks.
Have a good day.

Sep 09, 2011 | Canon PIXMA MP810 All-In-One InkJet...

1 Answer

How to scan a document on the laptop


You will need to ensure you have installed the cannon software correctly, as it comes with a method for scanning to the connected computer.

The Software you are looking for is
MP Navigator EX, it has an option to "Scan/Import" this will fire up the Multifunction scanner or just pressing scan on the multifunction after the software is installed will be sufficient.


So Drivers & Cannon Software are required
MP240 series MP Driver & MP Navigator EX

Manual - http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp240#BrochuresAndManuals
Software - http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp240#DriversAndSoftware

Jan 09, 2011 | Canon PIXMA MP240 All-In-One InkJet...

1 Answer

HOW CAN I DOWNLOAD THE SOFTWARE OF CANON MP190 TO ALLOW ME SCAN MY DOCUMENTS


Hi, The MP drivers are necessary to print documents and scan images.These drivers must be installed to use the print and scan features.The MP Navigator EX software for windows allows you to scan,save and print photosand documents.You can also edit images or attach images to e-mail using this application software.To download the softwares if you don't have the cd,
1)Go to software.canon-europe.com 2)Under Multifunctionals Select PIXMA MP 190 3)Select your operating system. 4)select your language. 5)Download the drivers and install it
Hope this information is useful to you. Feel free to post your comments. THANKS FOR USING FIXYA......BEST WISHES.....

Dec 09, 2010 | Canon PIXMA MP190 All-In-One InkJet...

1 Answer

Scanning probelm with my MP810


May be MP Navigator not compatible with Kaspersky 2009.

If you use KIS or KAS to protect your computer,disable KIS/KAS protection and try again.

I have same problem with my MP150 and after disable protection of my KIS2009, MP Navigator work perfectly.

Sorry for my bad English. I'm Vietnamese.

Mar 27, 2009 | Canon PIXMA MP810 All-In-One InkJet...

1 Answer

Installation CD


hi i am a certified Canon4.gif repair tech for this printer. if you follow the link below this will take you to Canons support site where you can download the software for your printer. hope this helps

http://www.usa.canon.com/consumer/controller?act=DownloadIndexAct

Dec 30, 2007 | Canon PIXMA MP810 All-In-One InkJet...

1 Answer

Scanner driver problems for MP810


If you do not have the software, you need to download the software from one of the following locations:

Official Canon Drivers and Software

Canon USA:DRIVER & DOWNLOADS
.....
After downloading is finished, unplug the USB and run the software that you downloaded.
The software installer will tell you when to connect USB.

Some Canon device may not be Vista compatible and cannot work on Vista.

Oct 30, 2007 | Canon PIXMA MP810 All-In-One InkJet...

Not finding what you are looking for?
Canon PIXMA  MP810 All-In-One InkJet Printer Logo

2,740 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts

kakima

Level 3 Expert

96518 Answers

old marine
old marine

Level 3 Expert

1464 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...