The sound is there but it plays extremely soft. so soft i thought the speakers went out till i noticed a faint sound....so i played some itunes and i could hear it but it will not tun up. i have checked the volume on the front of the laptop and in my control panel. im all out of ideas please help!!!!
An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert who has written 3 tips or uploaded 2 video tips.
An expert whose answer got voted for 20 times.
Re: The sound is extremely low and wont turn up
I hasd to call HP on this one in the past. They took me to the BIOS settings. There you can Reset BIOS settings to their original settings. If this does not do the trick, you can go to http://welcome.hp.com/country/us/en/support.html and download the updated drivers.
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I had this problem, till i went into setup on my remote then chose audio and noticed all the speakers for surround sound were turned on in the options. As i don't have surround sound i turned them off . Now it works ! The player was sending the sound to non exsistant speakers. Hope this helps
If the amp still goes into protect mode, the easiest thing to do is disconnect the RCA cables from the amp and see if still goes into protect mode (after turning off/on). If it does, the issue lies in the amp or the wiring to/from the amp (most likely case). Check to make sure no speaker wires came loose and touched +12V or ground (car body). From the sound of it, my guess is something internal to the amp died and will need repair.
Say "sound card" or maybe you fryed something due to overuse and or playing them too loud? Nah. Everyone plays speakers at the recomended level. Seriously, you need to get this checked out: radioshack.
Sounds like the left channel in the built-in amplifier went out or possibly damage in the connector or cabling. Quick test to eliminate the PC is to connect another set of working speakers or headphones into the PC speaker jack without making any changes. If it works w/o problems then it?s the speakers.
You can try plugging the speakers back into your PC and while playing something start wiggling the left channel cables and the main cable that goes into the PC. In particular pay attention to stress points like connectors. If that turns up nothing and you have the appropriate tools and skills you can open the speakers up and test out the solder points for the cables as well.
As always make sure your warranty has expired completely before you open them up or start cutting away. Let us know if you have any other questions and please don?t forget to rate this post.