Question about Nikon Digital Cameras

1 Answer

How can I change the exposures, or f-stops on the Nikon N75 35mm camera?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Nikon Master
  • 96,372 Answers

That depends on the exposure mode. In the point&shoot modes the camera sets the exposure.

In P you can turn the command dial to change the exposure.

In S you turn the command dial to set the shutter speed, the camera changes the aperture to suit.

In A you turn the command dial to set the aperture, the camera changes the shutter speed to suit.

In M you turn the command dial to set the shutter speed, you hold down the aperture button and turn the command dial to set the aperture.


If you don't have a manual, get one from http://www.butkus.org/chinon/nikon.htm

Posted on Dec 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i stop my camera from taking double exposures


your on camera settings in Exposure has the multiple exposure option On.

Oct 20, 2014 | Nikon D3300 DSLR Camera with 18-55mm Lens...

1 Answer

How to use time exposure


When you want to use the time exposure with your remote control, you need to be in the M mode (Manual) then you can select time Bulb. One step farther then 30 seconds. Then you can press the ML-L3 to start and again after some time to stop the exposure.

Nov 26, 2013 | Nikon D5000 Digital Camera

1 Answer

Solution for blur camera nikon d5000 when take pickture at night time


It may be your exposure combination. The blur is because your shutter speed is too slow. You did not say what you are photographing at night and without that information, I can only speak in generalities. It all depends on the light source. If you are taking pictures of illuminated signs, auto exposure modes might work great, but if you are shooting incident light rather than pointing your camera at the light source, I would use a tripod and use manual exposure. Adjust your ISO to a high number. That will allow a faster shutter speed to stop motion.

Jun 30, 2012 | Nikon D5000 Digital Camera

1 Answer

Incorrect exposure


It sounds like you've got exposure bracketing turned on. Hold down the Fn button and turn the main command dial to change the number of shots to 0.
Full details are in the "Bracketing" subsection of the "Exposure" section of the manual (page 130 in my copy). If you need a manual, you may download a copy here.

Apr 06, 2012 | Nikon D Digital Cameras

1 Answer

Incorrect exposure on NIkon D700


It sounds like you've got exposure bracketing turned on.
Refer to the "Bracketing" subsection of the "Exposure" section of the manual (page 130 in my copy). If you need a manual, you may download a copy here.

Apr 06, 2012 | Nikon D700 Digital Camera

1 Answer

Just got a 500mm f8.0 Telephoto Lens for my Nikon D90. When I connect it according to the instructions I am certain I have mounted the lens properly to my camera, I have a universal T mount to connect to...


The lens lacks the electronics to communicate with the camera. You must switch the camera to Manual exposure mode by turning the mode dial to M. The lens has only aperture, f/8, and so you have to control the exposure by changing the shutter speed and/or ISO. Unfortunately, the D90's light meter will not give you any help here.

You can get a general idea of the exposure by using another lens before mounting the 500mm. From there you can fine-tune the exposure by using the histogram display on the LCD monitor. This is how I do it with my D90 and 500mm lens.

Oct 27, 2010 | Nikon D90 Digital Camera with 18-105mm...

1 Answer

How do i change ISO/ASA on the nikon N65?


The ISO is automatically set by the DX code on your film canister - if there is no code, the camera sets ISO 100. If you load canisters yourself with, say ISO 400 film, you can adjust the exposure using the exposure compensation button at the top right side of the LCD ( " +/- " ). Using ISO 400 film set the +/- to minus 2 ( -2 ) so that it will UNDEREXPOSE 2 stops since the film is 2 stops ( 4X ) more sensitive than ISO 100 film.

Nov 18, 2008 | Nikon Digital Cameras

4 Answers

Nikon D80 Exposure Count


My camera is now fixed. It was a tiny speck of dirt on the sensors between the mounting of the lense & the camera. The uy that fixed it said it is a problem with the camera because they are so sensitive.

Jan 13, 2008 | Nikon D80 Digital Camera with 18-135mm...

1 Answer

Button for exposure


Nothing to fix - this is a major switch problem Contact Nikon technical support team for advice but I fear it is new camera time

Jun 22, 2007 | Nikon Coolpix 5700 Digital Camera

Not finding what you are looking for?
Digital Cameras Logo

Related Topics:

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nikon Digital Cameras Experts

kakima

Level 3 Expert

96372 Answers

Steve

Level 3 Expert

3287 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Nikon Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...