Question about Brother MFC 210C All-In-One InkJet Printer
The printer states install mgenta
If your ink cartridge still has ink in it, but is below the sensor level, black-out the sensor optical path through the cartridge inkwell with tape or marker. The inkwell is the center clear plastic column on the end of the cartridge near the "Brother" logo on the top surface of the cartridge. Blackout the sides of the inkwell - one side will do. This will trick the cartridge into thinking the particular cartridge is "Full" and allow printing to continue. You'll need to do the same on other cartridges if they are "Empty". Note: This is a temporary measure only with limited life. If the ink actually runs out and the system sucks air it can ruin the print head, at which point it's cheaper to buy a new printer.
Posted on Oct 21, 2008
It means one of the print cartridges is already out of ink or in the process of running out of ink. open the cover on your printer(check the user manual - http://www.brother-usa.com/ModelDocuments/Consumer/Users%20Manual/UM_MFC_210C_420CN_EN_286.PDF ) you will find several cartridges namely; Black, Yellow, Cyan and Magenta. Follow the correct procedure in replacing ink cartidges based on the user's manual.
Posted on Oct 15, 2008
Tips for a great answer:
you need more help come back.
/ thumbs / testimonial are welcome!
Jan 14, 2011 | HP PSC 2175 All-In-One InkJet Printer
Jan 10, 2011 | Lexmark X4650 InkJet Printer
Jul 21, 2010 | HP Printers & Copiers
May 14, 2009 | Lexmark X3470 All-In-One InkJet Printer
Dec 02, 2008 | Brother HL 1440 Laser Printer
Jun 12, 2008 | Printers & Copiers
73 people viewed this question
Usually answered in minutes!