Question about GE Profile Harmony DPGT750EC Electric Dryer

4 Answers

GE harmony profile #DPGT750EC1PL

Can you help me?I have no air coming out of the back of my dryer.I have checked the power cord,inspected the cuircut board for hot spots,made sure all the lent traps and vent is not clogged.I have read alot of complaints about the same problems on this website.Everybody says its the cuircut board or blower motor.The motor does not make any noise and spins fine and the cuircut board looks good.What would you try first.The blower motor is the cheapest of the two.Thanks,my email is dwiley30@yahoo.com

Posted by on

  • 4 more comments 
  • becca43843 Nov 05, 2008

    I am haveing the same problem with no heat I even went and bought a new heater assembly and that didnt help.and there is no air coming out of the dryer.If anyone knows anything please email me at becca43843@netzero.com

  • glattin Nov 17, 2008

    I have the same problem. The dryer heats up but does not blow out any air. Sometimes it will work. Then stop again. We have tried everything even running it with no vent hose just to make sure the vent was not stopped up. My email is glattin@windstream.net

    Kathy Lattin

  • arm219 Feb 12, 2009

    Im experiencing the same problem. I had it fixed onec already and it started back up again. I tried verything the manual states if this occurs. Can this problem be fixed or what?

  • jeffulie Mar 26, 2009

    Dude, I've got the same problem. Was hoping someone had the solutions!

  • UManiac Apr 11, 2009

    Jeryflores,

    I followed your instructions to access the service mode but when I hold down the "My Cycles" button nothing happens, yes I own a GE Profile Dryer DPGT750EC1WW and my dryer is not producing heat nor is it blowing any air either.

  • love2fix Apr 15, 2009

    I have the same problem! No air circulating. I took my dryer apart and the heating coil is fine. My assumption is without the blower working the heating coil will not work. Before I replace the blower motor, how can I check the motor?

×

4 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 207 Answers

Hello all...I hope the answer to this problem is not too late. I had the same problem with my dryer, no air coming out the back. The GE Profile Harmony actually has a service mode that you access by unplugging power, re-plugging power and then holding the "My Cycles" touch button for a couple of seconds. The dryer's computer will actually give you an error code. Unfortunately, the problem can be related to one of two things, the variable dc blower motor Part No. WE17X10008 MOTOR ASM - BLOWER
or the Inverter PWB Part No. WE04X10120 PWB/PCB ASM-MAIN

The good news is, after you do the reset, there's a chance actually everything works fine and the dryers computer reboot will have fixed the problem. If you have further questions, feel free to contact me. jeryflores at the hotmale I think you can figure it out.

Best of Luck Ya'll

Posted on Apr 04, 2009

  • Jerry Apr 16, 2009

    My apologies to everyone....here's the correct way to access service mode:



    It's called "Field Service Mode"
    1. Press the POWER key to turn the dryer on.
    2. Press HELP. The main help screen is displayed.
    3. Press and hold MY CYCLES and BACK simultaneously for 3 seconds. Press EXIT to return to the HOME screen.


    There's a 95% chance that it is your blower and your dryer should confirm that.



    I just recently replaced the blower in my GE Profile Harmony as well. While I had my dryer apart, I also cleaned the heck out of it. Excellent opportunity to take your vaccum cleaner and get all of those dust bunnies out!



    I purchased the blower from www.applicancepartpros.com for about $146 S&H included.



    Best of luck!

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

I have a GE DPGT750EC1PL Profile dryer. There is a service mode you can activate. It's called "Field Service Mode" To activate . 1. Press the POWER key to turn on the dryer 2. Press HELP. The main screen is displayed.3. Press and hold MY CYCLES and BACK simultaneously for 3 seconds.Press exit after it does the dryer diagnostics. I got this idea from another posting. Does anyone have any idea where I can get service field books on appliance repair on these newer appliances. Maybe something I can download complete manuals.

Posted on Feb 06, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Just a shot, but a buddy had a Maytag in which the fan hub had broken so he got puffs of air every so often. Take the cover off of the fan and see that it is indeed turning with the motor. My best guess, Ron

Posted on Sep 14, 2009

I am having the same problem with my machine. This is the 5th time that it started not heating up, it tumbles and sounds fine but there is no hot air coming in. Everything esle is working fine, and the help button ends up telling me that one of the Fuses or Circuit breakers must have broke or tripped. I searched the map of the machine and I can't find any fuses and I have checked all the house breakers. The previous 4 times that this has happened the machine ended up working again on it's own after letting it sit overnight. So what is up with this? it's obviously a reaccurring problem????

Posted on Oct 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Runs but no heat


Hi, If you have a gas dryer2_bing.gif.
The most common problem with a gas and no heat is the ignitor going bad...

Here is a tip that I wrote about that problem...

Gas Dryer2_bing.gif not Working Gas Dryer2_bing.gif Not Heating
http://www.fixya.com/support/r4398592-gas_dryer_not_working_gas_dryer_not

If your dryer2_bing.gif is electric2_bing.gif..
There could be a number of different problems...
Check out this tip that I wrote about this problem...

Dryer2_bing.gif Troubleshooting2_bing.gif Electric2_bing.gif Dryer2_bing.gif won t Heat
http://www.fixya.com/support/r3866345-dryer_troubleshooting_electric_dryer_won

May 29, 2010 | GE Profile Harmony DPGT750EC Electric...

1 Answer

GE profile harmony dryer electric won't heat after first load


Did you end up replacing this thermistor? If so did that solve the problem? We are having the same issue and I don't want to waste time and $$.

Dec 22, 2009 | GE Profile Harmony DPGT750EC Electric...

1 Answer

DescrI have a GE profile harmony electric dryer model #dpgt750ec1pl. About 5 minutes into a drying cycle the blower shuts down. There is still heat but no air coming out of the dryer duct. Any suggestions?...


you should not have heat when motor stops there is a switch in the motor to shut the element off....yours is not working(you could burn your house)replace the motor.
PLEASE DO NOT TRY IT AGAIN...can't be lucky all the time

Aug 07, 2009 | GE Profile Harmony DPGT750EC Electric...

1 Answer

OUR G.E. PROFILE DRYER MOD.# DPGT750EC1PL STARTS AND RUNS LIKE NORMAL, BUT THE BLOWER DOES'NT BLOW. WHAT DO WE NEED TO LOOK FOR SO WE CAN GET THIS DRYER RUNNING? THANKS.


The fan motor must be tested by energizing it and reading volts from timer control. If the fan is faulty it must be replaced, if there is no volts from timer control, then either wiring harness or timer control assembly must be replaced.

Jul 04, 2009 | GE Profile Harmony DPGT750EC Electric...

1 Answer

GE Harmony Profile


Did you check the terminal block where the cord plugs up and ohm the wires in the main cord? If thats not the problem then you might have a bad computer and or inverter.

Jun 30, 2008 | GE Profile Harmony DPGT750EC Electric...

1 Answer

GE Profile harmony dryer problems


Is the tub turning??Could be 2 different problems.I'll be happy to guide you through it.

May 24, 2008 | GE Profile Harmony DPGT750EC Electric...

2 Answers

Ge harmony dryer not heating up dpgt750ec1pl


First use the dryers service mode and see what trouble code you are receiving.

It's called "Field Service Mode"
1. Press the POWER key to turn the dryer on.
2. Press HELP. The main help screen is displayed.
3. Press and hold MY CYCLES and BACK simultaneously for 3 seconds. Press EXIT to return to the HOME screen.

There's a 95% chance that it is your blower and your dryer should confirm that.

I just recently replaced the blower in my GE Profile Harmony as well. While I had my dryer apart, I also cleaned the heck out of it. Excellent opportunity to take your vaccum cleaner and get all of those dust bunnies out!

I purchased the blower from www.applicancepartpros.com for about $146 S&H included.


Part No. AP3791484 Item: Motor asm-blower Price $133.05 Plus Shipping.

Mar 12, 2008 | GE Profile Harmony DPGT750EC Electric...

Not finding what you are looking for?
GE Profile Harmony DPGT750EC Electric Dryer Logo

1,900 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Dryers Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

John Tripp
John Tripp

Level 3 Expert

4636 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a GE Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...