Question about Office Equipment & Supplies
SOURCE: HP photosmart c8100 all in
do the normal copies of microsoft worf comes out properly without any spitting.then its the setting problem in your printer .you can change the settings through printer properties --just adjust the photo settings in your printer and it will print the photos.
but if the word document are also having the same problem its the printer problem get the replacement as the printer is new.
feel free for further queries.
Posted on Sep 20, 2008
SOURCE: I need to obtain a
Here is the user's and setup guide:
copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Posted on Nov 16, 2008
Check your wireless security settings and make sure the mac address of your printer is allowed to connect to the router. In addition, I would set my printer to only allow incoming connections from the router or you will have people driving by, printing ads that you probably will not like.
Posted on Dec 29, 2008
u need to chek setting of pritner in pc when u do pritner command it's show pritner propaty this is capple of options like in cd pritner on photo 4x6 also give all setting u have to chek this setting it's help u
Posted on Jan 09, 2009
I think I solved my printer problem: Chang the paper size to LTR in the printer panel. then go to compter printer setup and choose printing preferences and choose page setup and chang the paper size to Letter (LTR) also. hope this is helpful.
Posted on Feb 28, 2009
Tips for a great answer:
Jul 15, 2012 | HP Photosmart C6180 All-In-One InkJet...
Sep 20, 2008 | HP Office Equipment & Supplies
Photo tray problem
' Lift the output
tray up and verify that the photo tray ' is pushed in until it stops, then lower
output all the ' way down. Press OK
button on the printer to 'continue printing
' Lift the output
tray up and verify that the photo tray
' is pushed in until it stops, then lower
output all the
' way down. Press OK
button on the printer to
HP Photosmart C7280 All-in-One Printer
1. Turn off printer.
2. Pull out paper
tray and photo tray
3. Remove output
duplexer (on back of printer)
4. Open input sheet
feeder (on top of printer)
5. Open cartridge
access door. (Basically lift up control panel and scanner section of the
6. Turn on printer
(Power button on now raised control panel)
7. Printer may
display message "Performing printer alignment - Do not interrupt"
8. Wait for a few
minutes until printer stops making all setup noises.
9. Close cartridge
access door, close input sheet feeder, replace output duplexer, insert paper
10. Do a test print. All should be fine.
Mar 11, 2011 | Office Equipment & Supplies
Feb 26, 2011 | HP Photosmart D7160 InkJet Printer
Sep 01, 2009 | HP Photosmart C6180 All-In-One InkJet...
Aug 27, 2009 | HP Photosmart C7280 Laser Printer
Feb 02, 2009 | HP Photosmart D7260 Printer
Jan 26, 2008 | HP Photosmart D5160 InkJet Printer
Nov 10, 2007 | HP Photosmart D7160 InkJet Printer
69 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: