Question about Zanussi WJS1265W Front Load Washer/Dryer

1 Answer

Washing machine noisey on final spin

Its a zanussi zjd 125 built in machine its not in your list so i have picked another name, problem is very noisey on final drying spin sounds like motor bearings or brushes can you help,I have a pair of zanussi bearings from another zanussi machine

Posted by on

  • stargate1945 Oct 15, 2008

    thanks this is not the normal sound, its a grating sound that has got worse over the last month

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 54 Answers

This isn't a problem usually every washing machine is very noisy on a final dry its normal

Posted on Oct 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Final high speed spin very noisey


Something is causing the drum to be way out of balance. Does it bang and make noise when it's spinning empty? Probably not. Is something stuck on the side (inside of course) of the drum, causing it to shake when spinning? If not, a spring or shock absorber (connecting drum to sides, bottom or top of machine) has broken or come loose.

Nov 23, 2013 | Malber WD1000 Front Load Washer/Dryer

1 Answer

Zanussi aquacycle1200 F1245W When cycle advances-gets hung up on spin.


Hay Jim , sound like you need to replace ccu (main control board )good luck ,APPLIANCES R EN

Feb 26, 2013 | Zanussi F1245W Front Load Washer

1 Answer

Noisey drum, can bearings be replaced on zanussi zwf 1421 w


Yes they can. Search for a service manual for instructions, on the net. Parts are not usually exspensive, Repairmen are. I did mine in less than an hour.
Andy

Nov 09, 2009 | Zanussi F1045W Front Load Washer

1 Answer

I have a zanussi turbo dry built-in washer/dryer built-in 1200, Mod zjd . 125, and I do not know how to use it. HELP! Thanks, Cindy


Hey, Just load the washer but do not over load. These combo washer dryers are strictly for smaller loads. You should have a drawer to the left that you place the soap and softer and bleach. Set to the washer to washer. The door should lock automatically. Then set your dryer setting to the the Heat temperature that you want. 100 degrees is ok to start with. then it will adjust itself as it goes through the cycles you have set. Enjoy the machine should work. If it does not look to make sure that the door is closed all the way. Sometimes you have to open the door and reset it and shut the door or while it is closed gently push on it till you hear a small clicking noise. ENJOY YOUR WASHER DRYER COMBO

Aug 28, 2009 | Washing Machines

1 Answer

Power button seems to be broken


the trigger has been damage you have to replace it .if you want i can fix it im a technician

Jul 18, 2009 | Washing Machines

1 Answer

Burning smell and loose drum


If it is really noisey when it spins then this can only mean one thing.... the drum bearing are shot, its a complete strip down job, not an easy job for a beginer. Sorry

Dec 23, 2008 | Zanussi WJS1265W Front Load Washer/Dryer

2 Answers

Zanussi ZJD 125 on a timer switch


No prob, the washer never draws the full 3kw at any one time.
Plz rate this solution.
thanks.

Dec 18, 2008 | Zanussi WJS1265W Front Load Washer/Dryer

Not finding what you are looking for?
Zanussi WJS1265W Front Load Washer/Dryer Logo

347 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...