Question about Biostar P4M890-M7 Motherboard

1 Answer

Display card 8800 GT

When install the nvidia 8800GT display card system can't boot up, once remove it's ok.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 730 Answers

Is the card the correct speed for you slot 4X 8X 16X your video slot could be the wrong speed for card

Posted on Oct 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am trying to install an nvidia gt 240 512mb ddr5 into a ECS 945gct-m/1333 v3 board but its giving me the nvidia setup program could not locate any drivers that are compatible with your current hardware....


First install the graphic card properly then plug in the LCD or monitor cable in it . If you are getting display then it is ok. After it try to download latest drivers for the graphic card from here
http://www.nvidia.co.in/Download/index.aspx?lang=en-in

Aug 12, 2010 | EliteGroup ECS 945GCT-M/1333 Motherboard -...

3 Answers

Board: P5N32 SLI Premuim, Graphics Card Wont Work.


The best option at this point would be to take the x1650 out, put the 8800GT into the bottom slot and test to see if it boots. If it doesn't boot, try the other slot. Some motherboards also seem to have problems with some video cards as well.

Oct 26, 2009 | ASUS AI Lifestyle P5N32-SLI...

1 Answer

Just Bought a new P5q-SE2 motherboard last night and installed it carefully useing previously used parts that was in my system before. So I just did a MB upgrade. Can have anything come up on display when...


Is it at least powering up all your fans?? You might have a DOA (dead on arrival) Motherboard. What size is your power supply?? I would think that is is large enough with the 8800. Also, is your processor seated well?? Are your memory sticks seated well?? All silly questions I would think, but I thought I would throw them at you.

Everything worked with the other motherBoard right?? If all the questions are answered yes then I would RMA your board. Have it replaced via the warranty.

Aug 04, 2009 | ASUS P5QL-E Motherboard, LGA775, Intel P43...

1 Answer

Proper jumper & BIOS settings for XFX 750aSLI nForce motherboard


You will have to access the BIOS and disable the onboard graphics from there. Before you install your new card, boot the computer. As it is performing the POST, enter the BIOS (usually delete or F2 gets you in.) Once you have disabled the on board graphics, save your settings and exit. Then install your new card and attempt to boot the computer. If it will not boot, locate the CMOS jumper and activate it to reset back to default settings.

Apr 05, 2009 | Motherboards

1 Answer

With ASUS M2N-MX mainboard, ATI Radeon 7000 Series problem.


Your Motherboard has an onboard video chipset made by Nvidia. Nvidia and ATI have a history of not playing nice with each other.

I have 2 possible solutions for you.

1.) Remove the Radeon card and use the Nvidia onboard card (Essentially a Geforce 6100)

2.) Enter the bios (Usually done by hitting <Delete> or <F12> while the computer is booting up) Your Motherboards manual can tell you for certain. Then find the options for onboard video and disable it.

Then boot up the PC, When it say starting Windows press <F8> to bring up the windows boot menu. Select "Start in Safe mode" Once this loads up open the device manager, look under "Display adapters" find the entry for the Nvidia adapter, right click on it and select either "Uninstall" or "Disable this device"

Which you choose depends on your personal preference Whether you like Nvidia or ATI boards better.

If it makes your decision easier a Geforce 6100 is roughly equivalent to a Radeon 8500 in performance.

I hope this helps
Dave

Nov 11, 2008 | ASUS M2N-MX Motherboard

1 Answer

Asus m2n deluxe sli motherboard


Hi tbird, yes you can run the 8800 GT's even if the interface is 1.0
The 8800 GT is back wards compatible to the 1.0
Suggest you install the latest software drivers for the 8800 GT.
http://www.nvidia.com/object/geforce_8800gt.html

It wouldn't hurt to add a case fan to feed the two cards fresh air.

Good luck!
Mike

Aug 25, 2008 | ASUS AI Lifestylestyle M2N-SLI Deluxe...

3 Answers

Cant get any display through xpert vision 8800gt with msi p6ngm


is the fan on your video card working and is the heat sink for it clean this could be an overheating problem

Aug 07, 2008 | MSI P6NGM-FD Core 2 Quad Socket 775...

2 Answers

No display with AGP card installed.


If one of the components are not porperly connected or has faluire...the system boot up is halted with some beeps...You need to check whether the RAMS a properly fixed...processor cooler can be losened...

PLEASE RATE ME AS "FIXYA" <blue boxes> for my help

Jun 02, 2008 | ASUS CUV-NT (CUVNTWOTVWOV) Motherboard

1 Answer

Video cards pci-e


Hi s _beukelman7, one of the most important spec's of running two SLI cards is they must be identical. Your trying to run a 8800 & a 7300. They are both NVIDIA **** they are not the same. They are different & will fail in your system. Pg. 6-2 in your mnual. Either buy another 8800 or another 7300 SLI card.
It is suggested you go to NVIDIA web site & allow NVIDIA to check both your two graphic cards & system for the latest drivers. If NVIDIA finds you need updated chipset drivers please (follow all instructions) or your will find yourself re-installing your OS.
http://www.nvidia.com/Download/index.aspx?lang=en-us

The two most important item you need other than checking the above link, is the correct power supply. Your manual suggest a minimal of 500w psu when using a single SLI card. I suggest running a 550w for dual cards.
The second item concerns the SLI cable. It must be clean.

Good luck!
Mike

Apr 01, 2008 | ASUS M2N32-SLI Deluxe/Wireless Edition ATX...

3 Answers

Display adapter disappeared


Hello.

After installing new windows you should install all drivers needed by you computer. You should have a a cd utilities nvidia graphics card if you have not then you scan the driver it in web. try search in this website.
http://www.nvidia.com/Download/index.aspx?lang=en-us

if it is build in to the mainboard better go to the manufacturer website of your board. hope this help
melnavz

Mar 31, 2008 | ASUS A7S8X-MX Motherboard

Not finding what you are looking for?
Biostar P4M890-M7 Motherboard Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Biostar Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1042 Answers

Are you a Biostar Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...