Question about Goodmans W280NS Television

2 Answers

Goodmans GTV69RFDT Television had all freeview now only getting 3 channels

The picture and selection of channels was excellent untill a few months ago when the number of freeview channels was reduced to 3. Tried searching for updates to the driver and also re-tuning following the manual instructions but still only getting bbc1, bbc2, bbc news 24.

Any suggestions would be welcomed!

Thanks,

Kat

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I have just brought a one for all remote and the code on the back of my goodman tv isnt matching any of the codes on the remote booklet, i have tried selection search and that doesnt work either. Any suggestions on solving this head doing problem.

Many thanks
Dan Sowney

Posted on Apr 15, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Goodmans Master
  • 19,396 Answers

First ensure that the TV input is set on the Freeview channels, just in case.

Then check the antenna, when Freeview does not get all channels, it is always the aerial (antenna).

Many areas in UK have still poor reception. If you use an internal antenna, go to Argos or Currys and buy an amplified antenna for freeview, that will improve the signal.


Posted on Oct 15, 2008

  • julies955 Apr 29, 2012

    I have lost some of my freeview channels the
    Input is set to DTV

    Can u help

    Tks

    Speedy

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Cannot tune tv onto new channel,76 says invalid format, can get all other channels have soundbut no picture


although channel 76 is starting transmissions on Sunday 25 feb press releases and statements from channel 7 state that channel selection and programming for sets may not be effective until Wednesday 2 march
if you have the latest digital led you beaut tv , it will still not select until 76 comes on line as there is nothing to select ( there has to be a signal transmitted for the tuner to find it)
ask the question again if you are not successful after Wednesday

Feb 27, 2016 | Flat Panel Televisions

1 Answer

I tuned my goodmans LD1945WD TV for the freeview channels. After using them for a couple of weeks my DTV channel only shows a black screen. I can't change channels, rescan or receive any freeview...


Check out a reset to this set first. If it do not help you, check and replace the main system control memory IC. Contact any service technician. To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

Oct 06, 2014 | Flat Panel Televisions

1 Answer

No sound or picture on goodmans tv


I'm not sure if it's powering up from your question.

If the power is on, chances are someone hit the input button so it has no reception or it's on an obscure channel other than 3 or channel 4 in some cases.

I'd start by checking the inputs with the remote or the button on the TV itself.

If you can scrool through each input and let it sit on each for a few seconds you might find something...same as the channels making sure it's on channel 3.

If none of these work, you may need to take it in for servicing.

May 29, 2014 | NEC PlasmaSync 42MP3 42 in. Television

1 Answer

Does anyone know the sky remote code for my goodmans GTVL19W17HDF ? please


Hello
Setup codes for Goodmans TV with Sky remote are:

065 064 100 588 285 037 292 544 207 318 363 399 402 515 527 392 371 245 563 297 584 060 103 263 508 063 616 055

527

055

402

563

662

696

652


Follow the steps below

1* Select any channel on the TV.

2* Point your Sky+ remote control away from the TV and press the tv button.

3* Press and hold down the Select and red buttons simultaneously on the Sky+ remote control until the red light at the top of the Sky+ remote control flashes twice.

4. Input the 3 digit number from the Sky+ remote control codes then press the Select button. The red light at the top of the Sky+ remote control should flash twice.

5*Point the Sky+ remote control at the TV and try the volume button.

If this works try the other TV functions.

If these work then the correct code has been selected.

It's important to note that not all TV functions will be supported by the Sky+ remote control e.g. Picture in Picture.
?

If all functions do not work correctly, then repeat steps 1 - 3 and work through all the relevant 3 digit numbers from the Sky+ remote control codes, until you find the code which supports all or as many of the TV functions as possible.
Please note: In order to operate both your TV and Sky+ with your Sky+ remote control, you will be required to switch modes e.g. to switch on your TV from stand-by, you would need to press "TV" followed by the "Stand-by" button. Then to change channel on your Sky+ you would need to press the "Sky" button followed by the "TV guide" button.
OK.

Aug 25, 2011 | Goodmans GTVL19W17HDF 19 in. LCD TV

1 Answer

Problem with digital tv


The Antenna may be in a weak signal area heres a quick cheap fix
Get a Freeview Box and connect it via SCART LEAD to your tv, if the Box picks up a good signal then your tuner may be very weak..
You may want to try a BOOSTER to the TV first, and if that fails go with an external freeview. My neighbor has a 42 and the freeview box WITHOUT an antenna attached resolves all the channels..so give that a try. I have a goodmans too with a slow tuner and I have to retune it sometimes even though it gets a good signal from the antenna. I will be getting an external tuner freeveiw box.

Apr 15, 2010 | Goodmans GTVL32W27HDF 32 in. LCD TV

1 Answer

Retune process stalls


You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit http://tvretune.co.uk/productmanuals/

Oct 01, 2009 | Goodmans W280NS Television

1 Answer

Freeview has locked on one channel and won't retune


Used the solution of another user and it finally worked after a few attempts

Oct 01, 2009 | Samsung LE26R74BDX 26 in. HD-Ready LCD...

1 Answer

How do I retune my goodmans television for


You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit
http://tvretune.co.uk/productmanuals

Oct 01, 2009 | Goodmans W280NS Television

1 Answer

Freeview


go to menu settings, channel settings, set tv to CATV for cable, AIR for analog, or HD for high def.

Make sure you have the correct cables depending on your connection

Sep 16, 2009 | Samsung LE32R74BDX 32 in. HD-Ready LCD...

2 Answers

I have lost my tv channels!


I have a philips freeview box (although it is not built in). I recently lost all my channels also. It took me back to the installation screen and started to look for channels, furthermore if it couldn't find any it 'bugged out' on me. The only way I got around this was by unplugging the aerial, watching the screen trying to scan the channels and when the progress bar / channel # was near the end plugging the aerial back in. For some reason this started the scanning over again but this time it found channels! Strange I know, but maybe its different for me and one of those conspiracies that they program products to fail after a few years to make you buy more. Try this and let me know if it works Thanks Matthew

Jun 18, 2006 | Philips 26PF5320 26 in. LCD Television

Not finding what you are looking for?
Flat Panel Televisions Logo

465 people viewed this question

Ask a Question

Usually answered in minutes!

Top Goodmans Flat Panel Televisions Experts

olayoju victor

Level 2 Expert

191 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jonathon summesfield

Level 2 Expert

284 Answers

Are you a Goodmans Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...