Question about Marantz ZC4001 Expansion Audio Player For DAvED

1 Answer

MARANTZ : Connection problem ZR6001server/ZC4001client, remote control influence ?

Hello,

I've got a problem with the server/client connection between zr6001 and zc4001.

For apparently no reasons, sometimes the client does not receive any signal from the server.

And then for apparently no reason, it works again. I think a button of the remote control change the reception channel or other parameter on the client. Is it possible ?

It is confuse but i'm a bit lost...

Thank for your expertise.

Posted by on

  • Kicia Dec 30, 2008

    same problem, but setting GroupID doesn't resolve it (receiver can't 'hold' a channel, re-sets automatically to "0" instead of staying on channel "1", "2", "3" or "4")...

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi!
Perhaps the distance between the two energy plugs (ZR6001 & ZC4001) is to big. Also it could be, that other systems plugged in the energy supply of your home are disturbing the signal. 
I've no really connectio0n problems. Length is about 20m of energy supply line. 
But I've problems with controlling DVD Player of marantz, directly connected to the ZR6001 (REMOTE IN/OUT correct connected) by ZC4001. There is no chance to start DVD Player which is in standby, also no chance to control playing with PLAY, STOP, PAUSE, NEXT, LAST etc.
Perhaps you could help me with my problem?
THX

Posted on Nov 23, 2008

  • sosshost Nov 23, 2008

    Fixed the problem today:

    Set to default, by pressing MUTE&STOP for 3sec (ZC4001) and MULTI&7.1INPUT(ZR6001) for at least 3sec. Then get GroupID as instruction says. 
    Control works on both of my two clients perfectly!

    MfG SOSSHOST

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does 192,168,1,254 mean?


Hello,

Your server may be In Active mode, the FTP client chooses the port number that it will use to transfer data on and tells the server which client-side port to send the data to. It issues the PORT command to let the server know what IP address and Port number it will be listening on to receive the data from the server.
PORT 192,168,1,254,4,15 The server then initiates the data transfer to the client, sending the data to the port number that it was told to by the client. Since the Server has initiated the connection, a stateful firewall will not allow the data to be sent back though. (No client has created the connection and so no respective connection exists.)

Hope this helps.
Good Luck
C2Solutions

Feb 16, 2012 | Dell Computers & Internet

6 Answers

Upgrade log: ---------- HWK Update Client v 2.1.0.0 ---------- ---------- HWK upgrade started:6/11/2011 7:02:40 AM ---------- -- Target Id : 62 CF 1 10 -- UFSx Boot : UFxBoot V2.2 (c) SarasSoft...


Upgrade log:
---------- HWK Update Client v 2.2.0.0 ----------
---------- HWK upgrade started:8/1/2013 6:34:25 PM ----------
-- Target Id : 62 CF 1 10
-- UFSx Boot : UFxBoot V2.2 (c) SarasSoft 2003.
-- UFSx Firmw.: UFS_USB V2.8 (c) SarasSoft 2007.
-- UFSx S/N : 56512
-- Features : 00000001
-- Licence 5 : True
-- UFSx Vendor: TORNADO
-- HWK ID : A1.04-PRO1-DA0064A542600069
-- HWK Status : 1, DL: 0
----------
Locating HWK Upgrade server...
HWK Upgrade server found!
Preparing connection to server...
Connecting to HWKUpgrade server...
Server connection successfully established.
Authenticating on server...
Authentication stage error: Error: Server returned unrecognized reply

Jun 11, 2011 | Lantronix CoBox-FL-IAP (COBOXFLIAP11)...

2 Answers

I have Logmein Hamachi which was working, giving connection to my head office, but since I had to reload cannot get access to the remote server.


you have to make sure the remote machine is running the Client application.
it is possible when the server rebooted, it didn't start it.

you need to get to the remote server and turn it on.

although I think Logmein is a great software, all the communication is going through the LogMeIn servers which slows things down.
I suggest you install TeamViewer which is a direct connection and hence faster.

Nov 03, 2010 | LogMeIn Hamachi2

1 Answer

I am trying to downlaod something but i need to wright a proxy sever but i don't know what a proxy sever is or how to do it?


In computer networks, a proxy server is a server (a computer system or an application program) that acts as an intermediary for requests from clients seeking resources from other servers. A client connects to the proxy server, requesting some service, such as a file, connection, web page, or other resource, available from a different server. The proxy server evaluates the request according to its filtering rules. For example, it may filter traffic by IP address or protocol. If the request is validated by the filter, the proxy provides the resource by connecting to the relevant server and requesting the service on behalf of the client. A proxy server may optionally alter the client's request or the server's response, and sometimes it may serve the request without contacting the specified server. In this case, it 'caches' responses from the remote server, and returns subsequent requests for the same content directly.
A proxy server has a large variety of potential purposes, including:
1: To keep machines behind it anonymous (mainly for security.
2: To speed up access to resources (using caching). Web proxies are commonly used to cache web pages from a web server.
3: To apply access policy to network services or content, e.g. to block undesired sites
4: To log / audit usage, i.e. to provide company employee Internet usage reporting
5: To bypass security/ parental controls

Aug 01, 2010 | Computers & Internet

2 Answers

Cannot detect other printer in remote desktop connection


Hello my friend, regarding on your problem kindly check your system particularly your windows 2008 server OS. Kind reinstall the printer drivers then then shared it. Then after you share the printers kindly check the ip address of your windows server 2008 OS then go to the workstation Computer then click start button found in your task bar manager then click run. Then kindly type the "\\IP of your windows server 2008" where your printer drivers installed then enter. As soon as you can log in the Windows server 2008 menu environment then if you can find or see the printer icon then click the printers icon then right click then click connect. Let the system automatically installed the printer driver to your workstation computer. then as soon as your system finished installed the printer drivers then try to run and print if you can now print using network LAN.

Hope this solution able to solve your problem. If you need more assistance kindly rely to this post.

Thank you.

geo_jonas

Jul 17, 2009 | Office Equipment & Supplies

8 Answers

Port Forwarding On Linksys RV016


it's a rather lenghty explanation so please go to this site and follow the instructions...
http://portforward.com/english/routers/port_forwarding/Linksys/WRT54G/

Robert

Please rate this solution ... thanks

Sep 08, 2008 | Linksys RV016 Router

1 Answer

Access remote system devices


if need to access the device of your client,just follow the steps.

we take cd rom for eg to access.

1.right click the drive there you see "sharing and security"
2.click on the and enable share as cd rom.and give maximum allowed.
3.then from your system.Run->ip of the machine->enter.
4.it shows all the share file of the client machine

if want access remote desktop

1.enable the remote desktop connection in the remote machine
2.in RUN type MSTSC the remote desktop connection will popup.
3the type the ip of the client machine

Mar 20, 2008 | Computers & Internet

Not finding what you are looking for?
Marantz ZC4001 Expansion Audio Player For DAvED Logo

311 people viewed this question

Ask a Question

Usually answered in minutes!

Top Marantz Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

74666 Answers

 Grubhead
Grubhead

Level 3 Expert

5259 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Marantz Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...