Question about Aastra Telecom Meridian 6320 Corded Phone (M6320)

Open Question

M6320 FeaturePhone I have just taken a call and am trying to transfer to another extension in our office and the extension that I am trying to transfer the call to is engaged, how do I get the call back? I have tried pressing the Conference/Transfer button, I have tried pressing the PDN Key and you can hear the caller but there is beeping in the background.

Posted by on

4 Suggested Answers

  • 38 Answers

SOURCE: Switch unable to transfer calls to extension

check the extn number izzit the correct number
try use that phone call to displayed phone to c wat the extn number

Posted on May 31, 2009

digitalhubz
  • 109 Answers

SOURCE: outbound caller ID

Telephony configuration might necessary...

Posted on Oct 21, 2009

consultel1
  • 860 Answers

SOURCE: how do I identify extensions, transfer calls,

To identify the extensions: if its a display set, press feature 00 and the screen will show the extension number. press feature 00 to exit programming.
If its a non-display set access the intercom and call a display set.The extension number will be displayed on the screen that is recieving the call.

To transfer a call: while your on the call to be transfered, press the transfer button and then the extension number of the person you wish to transfer the call toand hang up.

For a conference call:while on the line with the first caller,press the conf key (the caller will be placed on hold) place a call to your second party when they answer press the conf key again. all 3 parties will be bridged(you + the 2 lines) to get rid of one of the callers press thier line and feature 6 (conference drop)

Changing the time on a Partner system is done on either ext 10 or 11. At one of those ext's press the feature key and "00"
next press the left hand intercom twice
the display should say system programming
enter in "#103"
the display should say system time and the current programmed time
enter the new time in 24 hour format
press feature "00" to logout

Posted on Jan 05, 2010

guru_fixya
  • 944 Answers

SOURCE: We would like to transfer

Hi,

You can transfer only one time that is before going voice to mail extension.Sorry it is not possible.

Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thank you for using fixya have a nice day:-)

Posted on Feb 18, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When a call comes in and I transfer to my boss' extension, incoming calls do not come through, caller states phone keeps on ringing. Also on that same extension calls do not transfer to voice mail.


  • Begin the transfer. With the caller on the line, press the "Transfer" key. The caller will automatically be placed on hold and you will hear a dial tone.
  • Connect the caller to the other party. Dial the extension of the party you wish to reach. When you hear the extension ring or after you've announced the caller, complete the transfer by pressing "Transfer" a second time. If the person does not wish to receive the call, press "Release" to disconnect from the dialed extension. Press the key beside the flashing arrow on the LCD indicator where the various lines are displayed to return to the caller.
  • Cancel an incomplete transfer. If you make an error when dialing and need to retrieve the caller, simply press the key beside the flashing arrow on the LCD indicator.

  • Park an incoming call. Parking a call at a designated extension allows the recipient to answer the call from any phone in the facility. With the caller on the line, press the "Park" key twice. If your system designates a particular extension for parked calls, the caller will be held at that extension. Otherwise, the caller is held at your extension. To specify an extension for a parked call, press "Park," dial the desired extension and press "Park" a second time. Replace the handset.
  • Retrieve a parked call. On any system phone, press "Park" and dial the extension on which the call is parked. You will be connected to the caller.

Aug 18, 2016 | Nortel Norstar M7310 Telephone

1 Answer

I can't remember my password to access messages on my M6320


Your provider will have to reset it for you. They may charge you for it though. That is the only way

Feb 28, 2012 | Aastra Telecom Aastra M6320 Single Line...

1 Answer

I have been assigned an office with an old Meridian NT4X36 telephone. It has not user guide available and I need to know how to transfer calls - there is no transfer button on it. Thank you.


When on a call you would like to transfer, try pressing the FEATURE button then dial 70 followed by the extension number you are transferring to. Typically the transfer button is one of the programmable buttons, try pressing the FEATURE button then dial *0 and press one of the programmable buttons to identify what it is programmed as.

Jan 26, 2011 | NorStar Meridian M5209 Display Phone

1 Answer

We need to set up a voice mail for an extension that has not been used in years. When I press intercom 777 and enter extension it tells me to enter password which no one in the office knows anymore. When...


The default password on partner voicemails is 1234. The reason for the call returning to the extension that transferred the call to the new extension is probably because the cover vms isn't set up for the new extension.
To check the vms cover for that extension, at either extension 10 or 11 press feature 00 and press the left hand intercom button twice. The display will say system programming.
Enter #310, the display will sayAutomatic VMS Cover Extension:
enter in the extension number of the new extension.
The screen will say either "1 assigned" or "2 not assigned"
enter in 1 (assigned)
press feature 00 when finished.

Sep 30, 2010 | Avaya Corded Phone avaparp18d

1 Answer

I have 1 extension that will not go to voice mail. I have tried the *713 and a 2 digit number between 00 and 99 and it still just rings endlessly. When I make an inner office call to this ext... it picks...


What happens when you TRANSFER an outside call to that extension? If that works, you have Intercept issues which is handled with programming. If it still does not transfer, you have CF issues, started by a *710x command for both internal and outside calls.

Carl

Aug 11, 2010 | Panasonic KX-T7633 Corded Phone

1 Answer

How do I transfer calls to someone else in the office using Norstar T7316 phone?


If your telephone doesn't have a transfer button programmed press feature *3, the button you want the transfer button to be, and enter feature 70. While on the call press the transfer button (or press feature 70) and the extension you want to transfer to.If you want a screened transfer, wait til the extension called answers,and ask if they wish to talk to the caller on the line. if they dont, pick up the caller off hold. if they want to talk to them hang up and they'll recieve the call. If you want to blind transfer, hang up after youpress transfer and dial the extension and they'll get the call without screening.

Sep 28, 2009 | NorStar T7316E Corded Phone

1 Answer

TRANSFER TO WRONG EXTENSION


This will be an easy fix. It is your night AA selector code. Did you resolve this?

Apr 07, 2009 | AT&T Lucent Merlin SP 34 Phone

1 Answer

Switching extensions


What do you mean their phones do not work when transfering to them... their phones still are working, but they might be different extensions now.

If you goto a set, and do a FEATURE * 0, and then press their intercom button, and see what extension comes up.

Lets check the system programming for autoset relocate:
-> get into the system
-> find SYSTEM PROGRAMMING and enter
-> find FEATURE SETTINGS and enter
-> look for SET RELOCATION: this is probably set to NO...
(when autoset relocation is set to yes, the telephone sets become smart phones, meaning when you move the sets- the extension(s) and buttons follow the set; if it set to no, the programming remains in the room/jack/port.)

There are a couple of options; but the easiest is to get the people to put back their phones to where they were, go into system programming after everyone put their phones back, turn Set Relocation to YES... and then get them to move the sets to their new offices... the phones will take sometime to come up(flashing alot longer than usual), that is because the system is reprogramming the sets to their new port assignment.

Mar 24, 2009 | NorStar M7310 Corded Phone

2 Answers

Switch unable to transfer calls to extension


Sounds like the station is in do not disturb mode.Internal, external and transfered calls do not ring but the station can still make calls. there should be a lit button on the set maybe marked do not disturb or DND. press the button again to turn the led off. hope that helps

Mar 24, 2009 | Toshiba DKT-2010H Corded Phone

Not finding what you are looking for?
Aastra Telecom Meridian 6320 Corded Phone (M6320) Logo

Related Topics:

288 people viewed this question

Ask a Question

Usually answered in minutes!

Top Aastra Telecom Lands Phones Experts

Jose Ma DM.
Jose Ma DM.

Level 3 Expert

485 Answers

Steve Luck
Steve Luck

Level 3 Expert

817 Answers

voyager663rd

Level 1 Expert

29 Answers

Are you an Aastra Telecom Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...