Tv wont turn on

Toshiba CX36F85 36" TV Blink - Questions - Fixya

www.fixya.com > ... > Toshiba > Toshiba CX36F85 36" TV

Toshiba CX36F85 36" TV, blink related issues. ... Every brand TV will have its ownblinking ... stand by light blinks 6 times, wont power on tv is only 4 years old. ...From the number of blinks occur at one time switch ON, you can get an idea ...

Toshiba CX36F85 36" TV Blinks - Questions - Fixya

www.fixya.com > ... > Toshiba > Toshiba CX36F85 36" TV

Toshiba CX36F85 36" TV, blinks related issues. Get free help ... Every brand TV willhave its own blinking codes. From the ... Push power button and it ... and then ... stand by light blinks 6 times, wont power on tv is only 4 years old. Junk! it wont ...

Toshiba power light blinking not turn Standard (CRT ... - Fixya

www.fixya.com > ... > Standard (CRT) Televisions

This link helps to diagnose

The blinking lights are a service code. You should first try to unplug your TV and leave it unplugged for at least 4 hours... then plug it back in again.

If the blinking light is still there and no picture, time to have the TV serviced. Good luck!

The power light blinks about 9 times and the tv wont turn on what does this mean? its a magnavox 51mp392h/17

30 YR SERVICE TECH.
YOUR UNIT IS EXPERIENCING A POWER SUPPLY FAILURE.(INTERNALLY)
TAKE TO A SONY AUTHORIZED SERVICER.

My tv wont turn on. It tries to turn on the green light lights up 3 times then nothing. what is wrong?

you can shove your premium assistance program , i spent 2000.00 already
tv shuts off for no reason...red light blinks 4 times ...stops...blinks 4 times....stops....etc....what can i do before taking it back??
this is a brand new unit....fantastic picture....fix my problem

The blinking red light at the the front of the television is the "Diagnostic STANDBY/TIMER LED".
This little red light will blink 2, 4, or 5 times and then stay off for three-seconds. And blink again for 2, 4, or 5 times. This cycle repeats. The most common diagnostic code is the 4-blink code.

When the red LED blinks 4-times, it means one of two possible causes:
1) +13V is not supplied on the A-board. Or, 2) IC502 is faulty.

It is best to take this television set to a repair facility and ask that the +13V power supply be repaired.
The copper tracks and integrated circuit pads are very thin and delicate on the KV-24FV12 circuit board, and will easily lift off of the circuit board, if the incorrect desoldering tool is used. Unless one has a good quality PACE vacuum desoldering unit, one should not attempt to repair the television.

Here you find sony blinking codes

SIX Blinks---No Horizontal (H STOP), no raster, goes to the blinking selfdiagnosis
function immediately. Check C515 & 516 and the jungle IC, IC206.

SEVEN Blinks---High voltage shutdown. The high voltage has exceeded 33k
and the unit goes immediately into safety shutdown. Check power supply
regulation and horizontal circuits.

there are 4 caps that need to be replaced. http://chrisandnat.com/projects/blinkingtv/blink.htm