We have a steam station which has stopped working in that steam does not come out there is a light on the unit which is on/flashes (it's a symbol with a cross through it). Is this a safety cut out? How do you re-set? What do you think the problem is?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
My wife has one of these irons and she loved it. Now it steams for a while, and a red light starts blinking and it stops steaming. It can be turned back on and works for a while, then the same thing happens. I read that it needed descaled, so I bought OUST descaler and ran it through the iron, but it did not solve the problem. Any one have a solution to this problem, I would like to hear from you.
I had same issue , now , once you turn the unit on , you should see displayed 3 steam jets and the flashing standby , turn the dial on the iron to max ,press the steam button on the machine to max steam , leave for a minute or so , now press the steam button on the iron , does it make a noise ? if it does , slightly raise the whole front end of the unit ( easier if you have the iron on the worktop and not on the unit !) for a minute then try and press the steam button on the iron again . I think there is a bit of an issue about the conection between the water tank and the filter . This solved my issues and i do hope it will help you .
you have probably solved this by now but I just got the same model new switch on instructions as follows press and HOLD the POWER button for 3 seconds to switch the unit on once temperature has been reached, press and HOLD the steam button on top of the iron for up to 20 seconds this will prime the steam pump and only has to be done once for each ironing session the pump noise will stop once it has been primed with water hope this helps if still needed if you need the user guide, let me know, I'll scan it for you Wendy