Question about GE Refrigerators

Open Question

GE Profile SS side-by-side not getting cold

The refrigerator is only two years old and having problems. Tried to change the temperature control is factory setting of 37 degrees fringe and zero degrees freeze. Will not reset the temperature. The current temperature is 44 degree fringe and 18 degree freezer. Did everything as stated in the manual and the temperature stays the same. On top of all that the icemaker is not working. The water dispenser is working properly. There is no frost or any noticeable obstruction to the ice maker. Changed the filter also.

Posted by on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mrfixit64857
  • 9 Answers

SOURCE: Power is on but nothing is working, not cold ,no water, no ice

Sounds like the unit needs a reset of sorts, Get your food into another refrigerator or ice chests and unplug the unit. let it stand open for several hours (just in case the vents are iced) and then plug it back in.

Posted on Jan 01, 2009

  • 531 Answers

SOURCE: 16 month old GE Profile

see if the back wall inside of freezer have ice if so you have to change tiker board or check your doors if closing

Posted on Mar 31, 2009

  • 61 Answers

SOURCE: Refrigerator does not maintain 37 degrees

i have seen this problem before its the control board in the back the board is about 150 dollars and it goes every DING DING 5 years lol horrible design of the one that comes on the fridge every ge side by side has this problem  its very easy to replace but have to "ground" yourself before you touch the new control board meaning rub you hands on plumbing pipes, not pvc or copper
good luck if you got questoins let me know

Posted on Jun 08, 2009

heatman101
  • 43501 Answers

SOURCE: 16 month old GE Profile

Hi,
As the weather is getting warmer for many people their freezer2_bing.gif and/or refrigerator do not work right because of a dirty condenser coil...

Check out this tip that I wrote about that... it is a great place to start trouble shooting your unit...and something that you can do rather then calling a repair person to do a simple thing for you...

Refrigerator2_bing.gif Condenser Coil Cleaning Refrigerator2_bing.gif Repair
http://www.fixya.com/support/r4024657-refrigerator_condenser_coil_cleaning

Refrigerator Troubleshooting2_bing.gif Refrigerator Compressor
http://www.fixya.com/support/r3885294-refrigerator_troubleshooting

Refrigerator Compressor Start Capacitor and Start Relay
http://www.fixya.com/support/r4023749-refrigerator_compressor_start_capacitor

heatman101

Posted on Aug 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fridge side working but only cooling to 50 degrees


My 14 years old GE profile refrigerator keep cooling above 50 degrees and not going down to below 40 degrees. I did clean condenser coil and fans are running fine. I adjusted temperature control to maximum cold .Do you think it my be short of refrigerant?

Jun 17, 2011 | GE Profile 25.6 Cu. Ft. Side-by-Side...

2 Answers

GE Profile Arctic Side x Side Refrigerator PSC23MGNA


if you were able to do the test... check the compressor unit, also the do check on the electrical relay of the ref.

Jul 01, 2008 | GE Profile CustomStyle PSC23MGSWW 36" 22.7...

1 Answer

Freezer not geting cold


Hi,

As the weather is getting warmer for many people their freezer2_bing.gif and/or refrigerator do not work right because of a dirty condenser coil...

Check out this tip that I wrote about that... it is a great place to start trouble shooting your unit...and something that you can do rather then calling a repair person to do a simple thing for you...

http://www.fixya.com/support/r4024657-refrigerator_condenser_coil_cleaning


http://www.fixya.com/support/r3885294-refrigerator_troubleshooting

http://www.fixya.com/support/r4023749-refrigerator_compressor_start_capacitor

heatman101

May 19, 2010 | GE Profile 25.6 Cu. Ft. Side-by-Side...

3 Answers

My 7 year old GE Profile Side by Side will not get


Self Diagnostics
To enter Self Diagnostic mode, both temperature control panel displays must be illuminated. A display
can be illuminated by pressing an adjacent temperature adjustment button. When both displays are
illuminated, set the freezer and refrigerator temperature settings to 5. Simultaneously press and hold all
4 temperature adjustment buttons for approximately 3 seconds. A flashing 0 in the refrigerator and
freezer displays will indicate that the refrigerator is in Self Diagnostic mode.

For temperature control panels with single-digit displays, the COLDER temperature adjustment button
will increment the numbers up and the WARMER temperature adjustment button will increment the
numbers down. Use the freezer temperature adjustment buttons to enter the test code number in the
freezer display. Use the refrigerator temperature adjustment buttons to enter the test code number in
the refrigerator display. When a test code has been entered, the displays will flash to confirm the test.
Press the HOLD button for 3 seconds to begin the test.
For temperature control panels with 3-digit displays, the COLDER temperature adjustment button will
increment the numbers down and the WARMER temperature adjustment button will increment the
numbers up. Use the freezer temperature adjustment buttons to enter the test code number in the
freezer display. Use the refrigerator temperature adjustment buttons to enter the test code number in the refrigerator display. When a test code has been entered, the displays will flash to confirm the test
code. Press any button other than a temperature adjust button to begin the test.
When testing has been completed, do one of the following things:
• Enter code 1 5 to completely reset the system.
• Enter code 1 6 to exit diagnostic mode. GSS manual

May 15, 2010 | GE (PSS26MSRSS) Side by Side Refrigerator

1 Answer

Model #PSC25MSTA SS - one year old, never got a manual with refrigerator, don't know how to lower the temperature. suddenly, ice cream melting; milk sour; push buttons to lower temperatures, does not set a...


Had a problem similar to this with this frig and the problem was a bad mother board that kept the fans from operating correctly to disperse the temperature. I woould actually get stalagtites forming from the warmer top shelves to the colder lower shelves. Repaire under extended warantee.

Jan 11, 2010 | GE Profile Arctica 25.4 Cubic Feet...

1 Answer

Refrigerator does not maintain 37 degrees


i have seen this problem before its the control board in the back the board is about 150 dollars and it goes every DING DING 5 years lol horrible design of the one that comes on the fridge every ge side by side has this problem  its very easy to replace but have to "ground" yourself before you touch the new control board meaning rub you hands on plumbing pipes, not pvc or copper
good luck if you got questoins let me know

Jun 08, 2009 | GE PSS25NGM Side by Side Refrigerator

1 Answer

Refrigerator will not cool


Unplug power, pull refrigerator away from wall and gently remove and examine both sides of control board, Look for burn marks or smell of burns and then let me know what you find. Thanks, Sea Breeze

Mar 24, 2009 | GE (PSS26MSRSS) Side by Side Refrigerator

1 Answer

Not keeping cold temperature and can smell plastic from heat


Sounds like the condenser fan motor is either jammed or has failed. if you wil pull the refrig from the wall and remove the lower compartment cover you will see the fan I'm reffering to as well as the condenser coil and compressor. if the fan has failed you can put a house fan blowing into this compartment to keep the unit operational until you can get it repaired. thanks for using FixYa Peyton

Feb 20, 2009 | GE (PSS26MSRSS) Side by Side Refrigerator

1 Answer

Power is on but nothing is working, not cold ,no water, no ice


Sounds like the unit needs a reset of sorts, Get your food into another refrigerator or ice chests and unplug the unit. let it stand open for several hours (just in case the vents are iced) and then plug it back in.

Jan 01, 2009 | GE (PSS26MSRSS) Side by Side Refrigerator

1 Answer

Water freezing at bottom of refrigerator/Temperature not right


thats a water tank holding water dfor the dispensor, if everything in refrig is freezing quite possible that the water in tank froze as well, which would explain no water,

Feb 24, 2008 | GE PSS26NSWSS Profile 25.5 Cu. Ft....

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

Sal DeAngelo

Level 3 Expert

2122 Answers

Lawrence Oravetz

Level 3 Expert

9587 Answers

okcchemist

Level 1 Expert

17 Answers

Are you a Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...