Question about MP3 Player Accessories

1 Answer

Philips iport hi my name is sam i need your help,i have some problem with my ipod it say me that i need to connect it to the pc and go to device manager to repair i tryed doing it but nothing is working.could u please help me geting my device up in running

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My iport is not started i don't konw why but i try to restart so many time but not started.....

Posted on May 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ipod classic manual


Your ipod may be corrupted and will need to be wiped and restored.
First of all try another lead to connect your ipod to pc.
Also look inside bottom of ipod to check no bent pins in ipod dock.
Also reinstall itunes incase of program corruption.
If still not working you will have to put ipod in disk mode.
Switch ipod off then switch hold button on and off then hold down centre putton and bottom pause button until TICK appears.You are in Disk mode.
Go to file explorer and right click your ipod if shown,Chose FORMAT then chose restore device defaults and restore. Once formatted open itunes and connect ipod with good lead.Ipod can now be restored from backup or a clean restore can be done

Aug 23, 2014 | Apple 160 GB iPod Classic (Silver) +...

1 Answer

Why wont iphone communicate with the ipod station


Have you made sure that there is no protective case on your iPhone that would be interrupting the connection between the two devices? Have you verified that your device is compatible with the dock? On most of the new ones they require a digital input from the iPod/iPhone which only iPods made in the past few years (2007 or later) can supply. Also try docking your device when the docking station is in standby mode.

Dec 25, 2011 | Philips DCM250 Table Stereo Clock Radio...

2 Answers

When I turn on the ipod it says locked and disabled and connect to itunes! what do I do to unlock and reconnect??


Plug the iPod touch into the computer with the USB Dock connector. Once it is connected to the computer turn off the iPod touch by holding the power button down on the top of the device until you see the "Slide to Power Off" on the screen. Power Off the Device. Once the device is off (and still plugged in) hold down the home button and keep holding it while pressing the power button to turn on the device. Continue holding the home button until you see the screen on the iPod Touch Say "Connect to iTunes" at which point you should launch iTunes on your PC/Mac if it has not already loaded.

Mar 02, 2011 | Apple iPod Touch 8GB 32GB 64GB 3rd...

1 Answer

I forgot the passcode to unlock my IPOD NANO 8GB Purple


Good day,

I came across a few situations where someone has forgotten their iPod's passcode and now can't use it.

I will give some instructions on how to possibly repair this problem.

The first thing you can try is to connect your Ipod to it's HOME Computer. This will normally override the lock. Only thing is that you need the lock code to be able to assign a new code.

Another method I came across is to connect your Ipod to a computer. Make sure you are able to see all hidden folders. Browse to your Ipod on My Computer and double click on your Ipod folder/location. Open the folder named "iPod_Control" inside the folder open the folder "Device". Inside the device folder rename the file "_locked" to "_unlocked".

These two methods has worked for me in the past, so please feel free to let me know if this help you!

Regards

Jan 04, 2011 | Apple iPod Nano Video 8GB Purple (5th Gen)...

1 Answer

How to unlock ipod touch


that is not a problem follow the steps below. If you cannot remember the passcode, you will need to restore your device using the computer with
which you last synced it. This allows you to reset your passcode and resync the data from the
device (or restore from a backup). If you restore on a different computer that was never synced
with the device, you will be able to unlock the device for use and remove the passcode, but your
data will not be present Follow the steps that i have outlined below. If this does not completely help your situation
please let me know and i will be glad to assist you. According to Apple, if you have forgotten the code, you can unlock the IPod by doing the
following: 1 If you can't unlock IPod using either [the code or connecting it to the computer you use to
manage its songs. . . Plug the iPod USB cable into the bottom of the iPod Nano. 2 Plug the other end of the iPod USB cable into a free USB port on a Mac or PC computer. 3 Open the iTunes application by clicking on the Dock icon on a Mac or using the Start menu on a
PC. 4 Click on the name of your iPod Nano under the "Devices" list in the iTunes window. 5 Click on the "Sync" button to establish a connection between your iPod and the computer. 6 Click on the eject symbol next to your iPod's name after the syncing process has finished. 7 Unplug your iPod Nano. The device will be unlocked and you will be able to access all normal
features again. if that does not work you can restore your iPod to factory settings using iPod Updater. Please
note that this will erase all data on your iPod. Afterwards, you can add your music and data back to your iPod. If you want to change the primary computer that your IPod is associated with, do this: 1. Restore your iPod. WARNING: The restore process cannot be undone. All of your songs and files will be deleted. Always make a backup of your important data. 2. Connect your iPod to the computer that you want to be the primary computer. 3. Open iTunes and synchronize. Apple also notes that company "representatives cannot unlock an iPod if you forget your
combination. If you can't unlock your iPod and you don't have access to the primary computer,
your only option is to restore the IPod, which will erase all music and data." If you need further assistance please feel free to follow up with a comment and i will be here to
assist you. If this assisted you please feel free to rate the comment. thanks and have a great
day. -Midwest-tek

Oct 16, 2010 | Apple iPod Touch 8GB 32GB 64GB 3rd...

1 Answer

How to unlock 4 digit ipod lock ?


that is not a problem follow the steps below. If you cannot remember the passcode, you will need to restore your device using the computer with
which you last synced it. This allows you to reset your passcode and resync the data from the
device (or restore from a backup). If you restore on a different computer that was never synced
with the device, you will be able to unlock the device for use and remove the passcode, but your
data will not be present Follow the steps that i have outlined below. If this does not completely help your situation
please let me know and i will be glad to assist you. According to Apple, if you have forgotten the code, you can unlock the IPod by doing the
following: 1 If you can't unlock IPod using either [the code or connecting it to the computer you use to
manage its songs. . . Plug the iPod USB cable into the bottom of the iPod Nano. 2 Plug the other end of the iPod USB cable into a free USB port on a Mac or PC computer. 3 Open the iTunes application by clicking on the Dock icon on a Mac or using the Start menu on a
PC. 4 Click on the name of your iPod Nano under the "Devices" list in the iTunes window. 5 Click on the "Sync" button to establish a connection between your iPod and the computer. 6 Click on the eject symbol next to your iPod's name after the syncing process has finished. 7 Unplug your iPod Nano. The device will be unlocked and you will be able to access all normal
features again. if that does not work you can restore your iPod to factory settings using iPod Updater. Please
note that this will erase all data on your iPod. Afterwards, you can add your music and data back to your iPod. If you want to change the primary computer that your IPod is associated with, do this: 1. Restore your iPod. WARNING: The restore process cannot be undone. All of your songs and files will be deleted. Always make a backup of your important data. 2. Connect your iPod to the computer that you want to be the primary computer. 3. Open iTunes and synchronize. Apple also notes that company "representatives cannot unlock an iPod if you forget your
combination. If you can't unlock your iPod and you don't have access to the primary computer,
your only option is to restore the IPod, which will erase all music and data." If you need further assistance please feel free to follow up with a comment and i will be here to
assist you. If this assisted you please feel free to rate the comment. thanks and have a great
day.-Midwest-tek

Sep 12, 2010 | Apple iPod Nano Video 8GB Purple (5th Gen)...

1 Answer

How do you unlock an ipod?


basically you need to remember the password. If it is not locked using a password make sure the slide switch is not in the lock/hold position (on select models and generations). If you cannot remember the passcode, you will need to restore your device using the computer with
which you last synced it. This allows you to reset your passcode and resync the data from the device
(or restore from a backup). If you restore on a different computer that was never synced with the
device, you will be able to unlock the device for use and remove the passcode, but your data will not
be present Follow the steps that i have outlined below. If this does not completely help your situation please
let me know and i will be glad to assist you. According to Apple, if you have forgotten the code, you can unlock the IPod by doing the following: 1 If you can't unlock IPod using either [the code or connecting it to the computer you use to manage
its songs. . . Plug the iPod USB cable into the bottom of the iPod Nano. 2 Plug the other end of the iPod USB cable into a free USB port on a Mac or PC computer. 3 Open the iTunes application by clicking on the Dock icon on a Mac or using the Start menu on a PC. 4 Click on the name of your iPod Nano under the "Devices" list in the iTunes window. 5 Click on the "Sync" button to establish a connection between your iPod and the computer. 6 Click on the eject symbol next to your iPod's name after the syncing process has finished. 7 Unplug your iPod Nano. The device will be unlocked and you will be able to access all normal features
again. if that does not work you can restore your iPod to factory settings using iPod Updater. Please note
that this will erase all data on your iPod. Afterwards, you can add your music and data back to your iPod. If you want to change the primary computer that your IPod is associated with, do this: 1. Restore your iPod. WARNING: The restore process cannot be undone. All of your songs and files will be deleted. Always make a backup of your important data. 2. Connect your iPod to the computer that you want to be the primary computer. 3. Open iTunes and synchronize. Apple also notes that company "representatives cannot unlock an iPod if you forget your combination.
If you can't unlock your iPod and you don't have access to the primary computer, your only option is
to restore the IPod, which will erase all music and data." If you need further assistance please feel free to follow up with a comment and i will be here to
assist you. If this assisted you please feel free to rate the comment. thanks and have a great day.

Jul 19, 2010 | Apple Advanced Technology iSee 360i ...

1 Answer

I dont know my code and i want my ipod unlocked


to unlock your ipod you have to remember the password that is set. Unless it is a ipod that has a slide switch on the top or side. If you do not remember the password that is not a problem. Follow the steps that i have outlined below. If this does not completely help your situation please let me know and i will be glad to assist you. According to Apple, if you have forgotten the code, you can unlock the IPod by doing the following: 1 If you can't unlock IPod using either [the code or connecting it to the computer you use to manage
its songs. . . Plug the iPod USB cable into the bottom of the iPod Nano. 2 Plug the other end of the iPod USB cable into a free USB port on a Mac or PC computer. 3 Open the iTunes application by clicking on the Dock icon on a Mac or using the Start menu on a PC. 4 Click on the name of your iPod Nano under the "Devices" list in the iTunes window. 5 Click on the "Sync" button to establish a connection between your iPod and the computer. 6 Click on the eject symbol next to your iPod's name after the syncing process has finished. 7 Unplug your iPod Nano. The device will be unlocked and you will be able to access all normal features again. if that does not work you can restore your iPod to factory settings using iPod Updater. Please note that this will erase all data on your iPod. Afterwards, you can add your music and data back to your iPod. If you want to change the primary computer that your IPod is associated with, do this: 1. Restore your iPod. WARNING: The restore process cannot be undone. All of your songs and files will be deleted. Always make a backup of your important data. 2. Connect your iPod to the computer that you want to be the primary computer. 3. Open iTunes and synchronize. Apple also notes that company "representatives cannot unlock an iPod if you forget your combination.
If you can't unlock your iPod and you don't have access to the primary computer, your only option is to restore the IPod, which will erase all music and data." If you need further assistance please feel free to follow up with a comment and i will be here to assist you. If this assisted you please feel free to rate the comment. thanks and have a great day.

Jun 01, 2010 | Tonino Lamborghini Lamborghini Deluxe...

1 Answer

Hi team,i am facing problem with philips go gear 2GB player, Problem is :when ever i switch it on,"please connect to Pc and use device manager to repair" please help me in this scenario,explain...


Hello,
I'm not a team member, but
1. Select your GoGear 2GB player from this list:
http://www.search.philips.com/search/search?q=GoGear+2GB&s=all&l=global&h=all&o=
2. When not having the program Philips Device Manager installed on your computer yet: Look under Software and Drivers, select the Device/Firmware Manager for your player.
2.1 Run the execute file Device Manager for installing the Device Manager toolbox.
3. Run Philips Device Manager:
  1. Having launched Philips Device Manager at Start -> Programs -> Philips Digital Audio Player -> SA2XXX -> Philips SA2XXX Device Manager on your PC
  2. Connect your player to the PC
  3. Device Manager should acknowledges your player and automatically goes into recovery mode.
  4. Follow the instruction of the Device Manager.
  5. After the player has been repaired, remove it from your PC and re-start.
If this was helpful I'd appreciate your answer.
When needing more help, just add a comment in this thread.

Feb 21, 2010 | Philips MP3 Player Accessories

1 Answer

Iphone 3G and Teac SR-L200i-W


You'll probably need a charging adapter like the Scosche Passport, avaiable via the Apple Store.

Aug 06, 2008 | Teac SR-L200i-W Docking Station for Apple...

Not finding what you are looking for?
MP3 Player Accessories Logo

Related Topics:

332 people viewed this question

Ask a Question

Usually answered in minutes!

Top MP3 Player Accessories Experts

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

mac colar

Level 2 Expert

421 Answers

Sean Cole
Sean Cole

Level 2 Expert

250 Answers

Are you a MP3 Player Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...