Question about Canon EOS Rebel 2000 with 28-80 lens 35mm Film Camera

1 Answer

Flash on a canon rebel 2000 eso

Information on how to use the flash on a canon rebel 2000 don't know how to turn off the flash

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 370 Answers

Just push the flash back and it locks ,...... thats flash off

Posted on Oct 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to turn Canon Rebel 2000 EOS on


Turn the camera on by turning the left-hand dial (looking from the back of the camera) to the red square marked L for "lock."

Apr 26, 2015 | Canon EOS Rebel 2000 with 28-80 lens 35mm...

1 Answer

External flash not firing in manual mode


In order to have your "External" flash work on your Rebel XSI, you need to go into the menu and turn on the external flash function. If you dont know how to enter into the menu mode, refer to your operating manual.

Nov 22, 2013 | Canon EOS Rebel XSi Digital Camera

1 Answer

I recently purchased a Canon EOS Rebel T3i SLR camera (July 2011) and already I am encountering a problem called "Err 05 the built-in flash could not be raised." Does anyone know how to resolve...


Hey Leo,

Unfortunately the problem you've mentioned is quiet common with your particular model.

Here's what Canon recommends, on its website.

-Turn the power switch to < ON > to turn on the power again.

And, if that doesn't work. Buddy, you'll have to drop by a service center. Hurry up, or you'll run out on the warranty period.

Toodles,

Rebel K

Sep 18, 2011 | Canon EOS 550D Rebel T2i Digital Camera

1 Answer

I have a Canon Rebel EOS 2000 (35mm) that will not work even after replacing the batteries twice. When I turn it to manual, or any setting, it has a flashing symbol in the lower left hand corner and...


is the memory card in? you could also try connecting to the computer. i know that when i got my rebel it came with software to use on a computer. How old is it?

Apr 18, 2011 | Digital Cameras

3 Answers

Canon eso err 05 how do I fix it ?


This means a flash problem.

The reasons for it may be several ones. Let me go from the one with higher probability to the lower one.

1. Flash is stuck. It is the most comon reason, and more easiest to confirm. When pressed the shutter (or pressed the flash side button in P mode) you hears a repetetive click noise, and the flash won't pop up. If this happens, the flash is stuck.

Sometimes is solved when at the same time you press the shutter button, with the finger (or nail) you gently pull it up. Once is up, check for dirty, or any residues (such as tape glue, sand or something like that) that stucks the flash.

Some persons apply a thin layer of lubricant on the side hinges. Don't put so much lubricant or oil because will get inside the camera, and cause other problems.

2. If not click sound is heard, the either the flash actuator relay or the DC/DC board (that provides power to the flash board) or the flash board are defective. This can be confirmed only in a camera repair shop.

If you need further support, please let me know.

Best regards,

Jul 17, 2009 | Canon Rebel XT / EOS 350D Digital Camera

1 Answer

I need a manual for my Canon Rebel ESO 2000


Hi - You can download the manual by clicking the link underlined in blue below:

Rebel ESO 2000

17a7a82.jpg

Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!

Informatica

Oct 04, 2008 | Canon Digital Cameras

1 Answer

I purchased a canon rebel eos 2000, however it did not have the manual with it, the canon dealer said to check with you and see if you could send it to me. thank you linda silvas 3228 rutherford...


Hi - You can download the manual from the link underlined in blue below:

eos 2000

832fa92.jpg

Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!

Informatica

Aug 20, 2008 | Digital Cameras

1 Answer

Built-in flash


do you get an error message? if yes the screws which are on the sides that hold the stainless steel slider bars could be missing the nylon spacer shims. a common fault

Jun 15, 2008 | Canon Rebel XT / EOS 350D Digital Camera

1 Answer

Lcd screen shows data but no picture


The more professional models of the Canon Rebel are designed to by used by looking through the viewfinder and not at the screen. The screen is for reviewing pictures and setting information.

Mar 18, 2008 | Canon Rebel XT / EOS 350D Digital Camera

1 Answer

EOS rebel flash is not popping up


Looking at camera from the front, the flash hinge is on the right hand side. Mine was corroded (due to sea spray). I removed the two arms which limit the travel of the flash, MAKE SURE YOU KNOW WHICH WAY UP THEY GO AND ON WHICH SIDE! remove the three very small screws which hold the cover on the flash and remove the cover. Now you can ease the bearing our and clean with Iso-propyl alcohol. Do not oil!. Reassemble and ensure it moves freely.

Mar 10, 2008 | Canon EOS Rebel 2000 with 28-80 lens 35mm...

Not finding what you are looking for?
Canon EOS Rebel 2000 with 28-80 lens 35mm Film Camera Logo

Related Topics:

240 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Digital Cameras Experts

Doberman

Level 2 Expert

246 Answers

Tony

Level 3 Expert

2598 Answers

halotheracer
halotheracer

Level 2 Expert

68 Answers

Are you a Canon Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...