Question about Brother SE-270D Computerized Sewing Machine

2 Answers

I purchased a 750D Brother Embroidery machine earlier this year. I have had to send it back once already, so I would not like to do that if not necessary (I live in NH). Here is my problem: While doing a pattern the machine was doing a fill in at the bottom of the pattern and it started repeating the same line over and over many times before I caught it. So I retried it and it did it again. I deleted that pattern and try another one and it started doing it right away. I tried a different pattern still and it did a couple of colors then started repeating again. So I shut the machine done and tried it later, now when I start it I touch the screen and then it says the carriage will move, but it doesn’t move and the error message says that a malfunction had occurred and to shut off the machine and try it again. I have tried this several times, I have unplugged the machine and tried again, I have disconnected and reconnected the carriage and nothing seems to work. Please help!! I miss working on my machine. Thanks, Vicki Libby

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

HI, When your pattern comes up on the visual screen the pattern is broken into different color components. If you touch the pattern on the screen it will delete the component you hit, which will in turn bring you to next component if not the first, which will cause you to start in the same place sewing the same area over. do not touch the screen just change the thread after each component

Posted on Oct 27, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Have you tried cleaning the bobbin race?

Posted on Oct 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have the new Bernina700 embroidery machine.It has locked up on me five times already during embroidery.When it does this,nothing works on screen or machine.I have to turn it off and back on again.


Since your machine is still under warranty, it may be a good idea to take it back to the dealer for a checkup. Otherwise, there are some Bernina groups on Yahoo that may be helpful. You'll need a Yahoo email account, then locate a group and request to become a member. Once admitted, you will have full access to post questions and answers, as well as previous conversations and files.

...

Jan 29, 2017 | Bernina Sewing Machines

1 Answer

Brand new machine doesn't do embroidery just lines as it was in storage for 3 yrs,needs rebooting can anyone help


It's too expensive!!?? Think I would check with another Brother technician. Sounds like someone didn't want to be bothered.

..

Apr 07, 2016 | Brother Sewing Machines

2 Answers

Can I do a double cover stitch on a Semco 750D overlocker


Semco 750d Overlocker Manual ' downloadfreefileshere.com

downloadfreefileshere.com/manuals/semco-750d-overlocker-manual.html
Dec 11, 2014 - Semco 750d Overlocker Manual Yahoo Messenger was the only program that Update Notifier caught. Few options per tab keep down the ...

Jul 28, 2015 | Sewing Machines

1 Answer

Adobe photoshop 5 0 user guide


Adobe won't save it as a brother file. You need to either find or purchase a embroidery file digitizer. Hold on to your had because they are about $1200.

Sep 25, 2013 | Brother Sewing Machines

1 Answer

Cotton breaks on Brother Embroidery Galaxie 2100 machine


Try turning down your top tension setting a bit. If its at 4 or 5, i would turn it down to about 3 ish. Cotton thread is more brittle than polyester and rayon thread.

Hope that helps :)
Chris

Jun 05, 2010 | Brother CE5000 Computerized Sewing Machine

2 Answers

I have a Brother 750D innov-isi think he tenchion


If the thread is pulling through the top of the fabric slacken off the top tension to about 4 and tighten the bobbin tension slightly by turning the screw on the bobbin case about a quarter of a turn clockwise and test.

Apr 06, 2010 | Brother SE-270D Computerized Sewing...

1 Answer

I just purchased this used. The embroidery tray


You will need to take the machine in to a Brother dealer to have it looked at.

Mar 04, 2010 | Brother ULT2001

1 Answer

Once I set up my design card and select design, the needle moves


Hi, and welcome to FixYa. If I understand your problem, the needle goes in and out of your fabric, and the embroidery hoop moves, but the machine does not actually start embroidering your design right away....did I get it right? If have time to answer a few questions, I can give more accurate instructions.

  1. How long have you had your machine?
  2. How long have you been doing machine embroidery?
  3. Do you have a manual for your machine?
  4. Look at the back side of your design - do you see lots of bobbin thread, or hardly any?
  5. Have you taken lessons for your machine or for embroidery?
  6. When your design is finished, can you where the machine skipped stitches?
Here a couple of things you can try (if you have already):

  • Make sure you use an embroidery needle, not a universal. In most cases, you should use a size 90. Change your needle after each project. A blunt need can cause your machine to skip embroidery stitches anywhere in the design.
  • Rewind or replace your bobbin. Make sure you use bobbin thread in your bobbin when you embroider - it is thinner and gives you better tension. If pre-wound embroidery bobbins are compatible with your machine, I recommend that you try one and compare the result with designs sewn using the bobbin thread you've been using.
  • Normally, you should loosen your tension a little bit when you embroider. When you look at the back side of your embroidery, you should see more bobbin thread than embroidery thread.
I owned an embroidery business for several years, and I have six different embroidery machines of my own - so with a little more info from you, I think I can help.


Feb 03, 2009 | PfaFF Creative 7570

2 Answers

Brother SE-270D embroidery question


No it is not possible. If you invent a hoop to do this you will become richer than Bill Gates. When you want to do embroidery on a pocket, you have to remove the pocket first, do the embroidery and stitch the pocketback onto the shirt.

Sad but true.

Dec 06, 2007 | Brother SE-270D Computerized Sewing...

1 Answer

Connecting to a computer


Are you asking how to connect the Brother PE-400D sewing machine?  You have "how to connect the '4000D' to a computer and what risk if any".  Which machine are you asking about - these are two different sewing machines.  If you are inquiring about the Brother PE 400-D, then your answer is... this machine is NOT capable of being connected to a computer.  However, if you wish to purchase or download embroidery designs from the internet, you may look into purchasing the Brother PE Basic. This allows you to download embroidery designs from the internet to your computer hard drive and then load them on to a Brother memory card.  The Brother memory card can then be slipped into the proper slot for the memory card on the sewing machine.  You will need to purchase embroider designs that are in the PES format for you Brother machine to read it.  Hope this helps!

Oct 31, 2007 | Brother Disney PE-400D Computerized Sewing...

Not finding what you are looking for?
Brother SE-270D Computerized Sewing Machine Logo

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Sewing Machines Experts

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18375 Answers

Irene Tulloch

Level 2 Expert

449 Answers

Are you a Brother Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...