Dell 32 bit w/vista. Everything works except scan. It used to work, but not now. ANY drivers available to correct this. Thanks
canon pixma mp600r won't scan
i would say maybe first step os to unistall all canon mp600r software
includin scanning programs and reinstall them and see if it then works.
this might cure your fault but make sure you do it from the setupdisc
not the canon website.
I scanned a document to the computer to print one off,thprinter tab started to print 12 copies so I...
(More)
I scanned a document to the computer to print one off,thprinter tab started to print 12 copies so I pressed the cancel button on the printerand since then the printer has not printed properly, I have deep cleaned but is still not working.
I have an iMac coupled to a Canon MP600 Pixma all in 1 unit. I recently updated my iMac to Snow...
(More)
I have an iMac coupled to a Canon MP600 Pixma all in 1 unit. I recently updated my iMac to Snow Leopard, and have since found that I am unable to use the scanner part of the machine. (Printer & copier no problem) Before the update I could select scan and the machine would run & deposit the scanned document into s folder for processing. Now all I get is a sign that says "Scanner warm up process" and that's it. Could you please give me some advice what to do. I use the scanner quite a bit and am now stuck. Many thanks
my mp600 works fine, except nothing happens when I connect to my laptop and try and get the printer...
(More)
my mp600 works fine, except nothing happens when I connect to my laptop and try and get the printer to scan a document. I press the scan button: nothing happens
5100 green and orange lights flashing, sign saying printer error has occurred, switch off power and...
(More)
5100 green and orange lights flashing, sign saying printer error has occurred, switch off power and back on again. if problem persists see the manual
When I turn on my canon mp190 the scanner bar is not completing the rotation cycle. This problem is...
(More)
When I turn on my canon mp190 the scanner bar is not completing the rotation cycle. This problem is causing the copier and printer not to work.