Question about Ricoh Aficio 450 Copier

1 Answer

SC570 Well, all you need to do is fill the tank on the back right of the machine. The oil pump has to pump it up to the sensor in the fuser. It will eventually go out, or you will get an SC570 code. So how do I clear the code, I have truned the machine off, on, unpluged. And of course all they want to do is send out a tech for $165.00. Also the correct product is a LD024C.

Posted by on

  • Tim Babcock
    Tim Babcock May 11, 2010

    Is the fuser oil tank filled?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ricoh Expert
  • 1,326 Answers

Would you like a little insight? I would take Bubbabear64 suggestion. If the oil bottle is not full, the disk it the bottle will un block the sensor that is telling the copier that it is all out of fixing oil, FYI the cost of the oil is about $70.00, so your price is most likly $150 - 250 maybe. To reset the code you have to go into service mode.

Posted on Nov 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

3224c sc570


look at the back of the machine, bottom centre you will find a small cover with one screw, bottle is behind that cover, do not over fill, bottle full will be marked with a small black line

Nov 03, 2013 | Office Equipment & Supplies

1 Answer

DSC224 printer displays low on fuser oil


There is a sensor that need to be cleaned if the code will not clear. I believe there is a black float that is part of the fuser bottle. If you swing out the oil bottle and look where the float would be... There is a sensor, clean the sensor and make sure it is plugged in correctly... Good Luck

May 22, 2012 | Gestetner DSc224 Copier

1 Answer

Ricoh aficio 3224c error sc570


Insufficient oil (the oil tank in the rear of
the machine)

Feb 25, 2011 | Ricoh Aficio 450 Copier

1 Answer

The machine will say Fill water tank. So, we will take the container out of the machine fill it to or just a little above the recommended line and then put it back into the machine. It will be full and it...


After filling the water tank, can you see if a grey plastic piece, in the back of the water tank, is floating?. If no, then that part needs to be replaced. If it does float, then the integrity of the water sensor, (located in the back of where the water tank is housed into), will need to be tested. Testing this sensor requires, tricking the coffee maker... that the door is closed. With Coffee Maker in the "ON" position, you will need to hold door switch in (located top right corner of unit, with door opened). As switched is held in, you will need to use a magnet and place it around the rear of where the water tank is housed into (Rear-left middle height area)... just around where the water tank float would be, if it were filled with water and inserted into the coffee maker. This sensor isn't visible, but is activated when a magnet is placed around it. If "FILL WATERTANK" message goes away, then replace plastic float or water tank itself.

Nov 16, 2010 | Miele CVA615 Espresso Machine

1 Answer

ERROR SC 570 RICOH AFICIO 1232C HOW CAN I FIX


Hello,

The machine has no fuser oil.
Fill the little tank at the back side of the machine. If the tank is full, check the tubes, oil pump, and oil sensor.
Reboot the machine to clear the SC.
The problem will be solved


Aug 10, 2010 | Ricoh Aficio 1232C Color Copier

1 Answer

I HAVE PROBLEME OF GESTETNER DSC224 ERROR COPIER SC570 .


Fuser oil end On the rear of the copier is a cover that is near the lower center of rear cover you need to add silicone oil (fuser oil) to the copier and cycle power. Oil P/N A2579550

-Carl, please let me know if this helps.

Jun 18, 2009 | Gestetner Office Equipment & Supplies

1 Answer

Sc 570 error code


SC 570 means Fusing oil end.
You have insufficient oil in the oil tank situated at the rear of the machine, please fill up with correct oil.
Afterwards please enter SP mode 5-810 and set to 1, then switch off and on the machine.
If you have sufficient oil in the tank and sc570 re-occurs, you have a defective oil pipe, oil pump or oil end sensor.

Dec 23, 2008 | Gestetner DSc224 Copier

2 Answers

Error Code SC570 for copier Aficio 1224C


It could be covering the sensor. Clean the fuser oil sensor off and see if it goes away.

Dec 17, 2008 | Office Equipment & Supplies

1 Answer

Resetting the fuser oil message


Well, all you need to do is fill the tank on the back right of the machine. The oil pump has to pump it up to the sensor in the fuser. It will eventually go out, or you will get an SC570 code.

Mar 04, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Ricoh Aficio 450 Copier Logo

Related Topics:

622 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts

quennie732

Level 2 Expert

393 Answers

OfficeServiceAjnc
OfficeServiceAjnc

Level 2 Expert

183 Answers

Bernard D'Souza

Level 2 Expert

161 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...